SIST EN 3155-009:2009

Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard

This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-008.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 009: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Die Kontakte nach dieser Norm sind von SAE-AS39029/56 abgeleitet und mit Kontakten nach SAE AS39029/58 koppelbar.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 009 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 009. del: Električni kontakti, ženski, tip A, nagubani, razred S - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 17-Mar-2009
• Withdrawal Date: 03-Sep-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Sep-2019
• Due Date: 26-Sep-2019
• Completion Date: 04-Sep-2019
• Ref Project: EN 3155-009:2009 - Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard

Relations

• Replaced By: SIST EN 3155-009:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 28-Aug-2019
• Replaced By: SIST EN 3155-009:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 08-Jun-2022
• Revised: SIST EN 3155-009:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 14-Sep-2016
• Replaces: SIST EN 3155-009:2009 - Aerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard
• Effective Date: 01-May-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 009: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse S - ProduktnormSérie aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 009 : Contacts électriques, femelles, type A, à sertir, classe S - Norme de produitAerospace series - Electrical contacts used in elements of connection - Part 009: Contacts, electrical, female, type A, crimp, class S - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3155-009:2009SIST EN 3155-009:2009en01-maj-2009SIST EN 3155-009:2009SLOVENSKI
STANDARDSIST EN 3155-009:20091DGRPHãþD



SIST EN 3155-009:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3155-009February 2009ICS 49.060Supersedes EN 3155-009:2006
English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 009: Contacts, electrical, female, type A,crimp, class S - Product standardSérie aérospatiale - Contacts électriques utilisés dans lesorganes de connexion - Partie 009 : Contacts électriques,femelles, type A, à sertir, classe S - Norme de produitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendungin Verbindungselementen - Teil 009: ElektrischeBuchsenkontakte, Typ A, crimpbar, Klasse S -ProduktnormThis European Standard was approved by CEN on 14 March 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-009:2009: ESIST EN 3155-009:2009



EN 3155-009:2009 (E) 2 Contents Foreword .3Introduction .41Scope .42Normative references .43Terms and definitions .54Required characteristics .54.1Specific characteristics .54.2Dimensions and mass .54.3Marking by colour code .94.4Material, surface treatment .94.5Permissible cables.94.6Tooling . 104.6.1Crimping tools . 104.6.2Insertion/Extraction tools . 124.7Cable stripping . 124.8Tests . 134.9Gauges . 165Designation . 166Marking . 167Technical specification . 16 SIST EN 3155-009:2009



EN 3155-009:2009 (E) 3 Foreword This document (EN 3155-009:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. This document supersedes EN 3155-009:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3155-009:2009



EN 3155-009:2009 (E) 4 Introduction The contacts defined by this standard are derived from those of SAE-AS39029/56 and, intermateable with those of SAE-AS39029/58. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 009, type A, crimp, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated male contacts are defined in EN 3155-008. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard EN 2591-*, Aerospace series — Elements of electrical and optical connection — Test methods EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification 1 EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts EN 3155-008, Aerospace series — Electrical contacts used in elements of connection — Part 008: Contacts, electrical, male, type A, crimp, class S — Product standard EN 4008-009, Aerospace series — Elements of electrical and optical connection — Crimping tools and associated accessories — Part 009: Positioner for crimping tool M22520/23 — Product standard 2 EN 4008-010, Aerospace series — Elements of electrical and optical connection — Crimping tools and associated accessories — Part 010: Head for crimping tool M22520/23 — Product standard 2 ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system
* All parts quoted in Table 8. 1 Published as ASD Prestandard at the date of publication of this standard. 2 In preparation at the date of publication of this standard. SIST EN 3155-009:2009



EN 3155-009:2009 (E) 5 MIL-DTL-22520, Crimping tools, terminal, hand or power actuated, wire termination, and tool kits general specification for 3 MIL-I-81969, Installing and removal tools, connector electrical contact, general specification for 3 SAE-AS39029, Contacts, electrical connector, general specification for 4 SAE-AS39029/56, Contacts, electrical connector, socket, crimp removable (for MIL-C-38999 series I, III and IV con
...