SIST EN 294:1997

Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs

This standard establishes values for safety distances to prevent danger zones being reached by the upper limbs of persons of 3 years of age or above. The distances apply when adequate safety can be achieved by distances alone.  Note: These safety distances will not provide sufficient protection against certain hazards, for example radiation and emission of substances. For such hazards additional or other measures need to be taken.  The safety distances protect those persons who try to reach danger zones without additional aid and under the conditions specified for the different reaching situations.  This standard need not be applied to machinery which is covered by certain electrical standards in which specific testing procedures are laid down, e.g. using the test finger.  For certain applications there are justifiable reasons to deviate from these safety distances. Standards dealing with these applications shall indicate how an adequate level of safety can be achieved.

Sicherheit von Maschinen - Sicherheitsabstände gegen das Erreichen von Gefahrstellen mit den oberen Gliedmaßen

Diese Norm legt Sicherheitsabstände gegen das Erreichen von Gefahrenstellen mit den oberen Gliedmassen für Personen ab 3 Jahre fest. Diese Sicherheitsabstände sind anwendbar, wenn eine angemessene Sicherheit allein durch Abstand erreicht werden kann.

Sécurité des machines - Distances de sécurité pour empecher l'atteinte des zones dangereuses par les membres supérieurs

La présente norme établit des valeurs de distances de sécurité empechant l'atteinte des zones dangereuses par les membres supérieurs pour les personnes âgées de trois ans et plus. Les distances s'appliquent quand un niveau de sécurité adéquat peut etre atteint par le seul éloignement.

Varnost strojev - Varnostne razdalje, ki preprečujejo doseg nevarnih območij z zgornjimi udi

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 13-Apr-2008
• ICS: 13.110 - Safety of machinery
• Technical Committee: VSN - Safety of machinery
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 03-Apr-2008
• Due Date: 26-Apr-2008
• Completion Date: 14-Apr-2008
• Directive: 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
• Ref Project: EN 294:1992 - Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs

Relations

• Corrected By: SIST EN 294:1997/AC:2003 - Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN ISO 13857:2008 - Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
• Effective Date: 01-May-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 294:1997
01-december-1997
9DUQRVWVWURMHY9DUQRVWQHUD]GDOMHNLSUHSUHþXMHMRGRVHJQHYDUQLKREPRþLM]
]JRUQMLPLXGL
Safety of machinery - Safety distance to prevent danger zones being reached by the
upper limbs
Sicherheit von Maschinen - Sicherheitsabstände gegen das Erreichen von Gefahrstellen
mit den oberen Gliedmaßen
Sécurité des machines -
...