kSIST FprEN 3487:2024

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Bars for machining
a or D ≤ 250 mm
500 MPa ≤ Rm ≤ 700 MPa
for aerospace applications.
W.nr: 1.4541.
ASD-STAN designation: FE-PA3601.

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht - Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

No Scope available

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Barres pour usinage - a ou D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

No Scope available

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Palice za obdelavo - a ali D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Nov-2020
• ICS: 49.025.10 - Steels
• ICS: 77.140.60 - Steel bars and rods
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 29-Feb-2024
• Due Date: 18-Apr-2024
• Completion Date: 29-Feb-2024
• Ref Project: FprEN 3487 - Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa

Relations

• Revised: SIST EN 3487:2008 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
• Effective Date: 19-Jan-2023
• Revised: SIST EN 3487:2008 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
• Effective Date: 18-Jan-2023
• Revised: SIST EN 3487:2008 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
• Effective Date: 11-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3487:2020
01-november-2020
Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Popuščano - Palice
za obdelavo - a ali D =< 250 mm - 500 MPa =< Rm =< 700 MPa
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Bars for
machining - a or D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -
Stangen zur spanenden Bearbeitung - a oder D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Barres pour
usinage - a ou D ≤ 250 mm - 500 MPa ≤ Rm ≤ 700 MPa
Ta slovenski standard je istoveten z: prEN 3487
ICS:
49.025.10 Jekla Steels
77.140.60 Jeklene palice in drogovi Steel bars and rods
oSIST prEN 3487:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 3487:2020
oSIST prEN 3487:2020
DRAFT
EUROPEAN STANDARD
prEN 3487
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 49.025.10 Will supersede EN 3487:2007
English Version
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Bars for machining - a or D ≤ 250 mm -
500 MPa ≤ Rm ≤ 700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -
Lufterschmolzen - Weichgeglüht - Stangen zur
Élaboré à l'air - Adouci - Barres pour usinage - a ou D ≤
spanenden Bearbeitung - a oder D ≤ 250 mm - 500 MPa
250 mm - 500 MPa ≤ Rm ≤ 700 MPa
≤ Rm ≤ 700 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3487:2020 E
worldwide for CEN national Members.

oSIST prEN 3487:2020
prEN 3487:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

oSIST prEN 3487:2020
prEN 3487:2020 (E)
European foreword
This document (prEN 3487:2020) has been prepared by the Aerospace and Defence Industries Association of
Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Servi
...