iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 978:2000

(Main)

Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta

Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta

This European standard specifies a test method for the determination of the factor alpha and the factor beta of test specimens of tanks of glass reinforced thermosetting resins for the underground storage of liquids.

Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Bestimmung des Faktors a und des Faktors b

Diese europäische Norm legt ein Prüfverfahren zur Ermittlung des Faktors Alpha und des Faktors Beta von Probekörpern aus Tanks aus textilglasverstärkten Reaktionsharz-Formstoffen zur unterirdischen Lagerung von Flüssigkeiten fest.

Réservoirs enterrés en plastiques renforcés de verre (PRV) - Détermination du facteur a et du facteur b

La présente norme européenne prescrit une méthode de détermination du facteur alpha et du facteur béta des éprouvettes de réservoirs réalisés en résine thermodurcissable renforcée de verre pour le stockage souterrain de liquides.

Podzemni rezervoarji iz armiranega poliestra - Določitev faktorjev α in ß

General Information

Status
Published
Publication Date
30-Nov-2000
ICS
23.020.10 - Stationary containers and tanks
Technical Committee
TLP - Pressure vessels
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000
Directive
89/106/EEC - Construction products
Mandate
M/EXP - Expected mandates in CPD field.
Ref Project
EN 978:1997 - Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta

Buy Standard

EN 978:2000EN 978:2000
PreviousNext
Standard
EN 978:2000
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 978:2000
01-december-2000
3RG]HPQLUH]HUYRDUMLL]DUPLUDQHJDSROLHVWUD'RORþLWHYIDNWRUMHYĮLQ‰
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and
factor beta
Unterirdische Tanks aus textilglasverstärkten Kunststoffen (GFK) - Bestimmung des
Faktors a und des Faktors b
Réservoirs enterrés en plastiques renforcés de verre (PRV) - Détermination du facteur a
et du facteur b
Ta slovenski standard je istoveten z: EN 978:1997
ICS:
23.020.10 1HSUHPLþQHSRVRGHLQ Stationary containers and
UH]HUYRDUML tanks
SIST EN 978:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 978:2000

---------------------- Page: 2 ----------------------

SIST EN 978:2000

----------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15969-2:2022(Main)
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data
EN 15969-2:2022

This European Standard specifies the data structure needed for tour management, scheduling orders of measured and unmeasured products online to the truck. Processed orders are transferred back to the host in the office at once or later every time the truck is online.
It specifies the transfer of commercial and logistic data between transport vehicle equipment, on board computer of the tank vehicle and stationary facilities for all communication channels between these parties.
This document should only be used in conjunction with EN 15969-1 and should not modify or override any of the requirements of EN 15969-1.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15969-1:2022(Main)
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data
EN 15969-1:2022

This document specifies data protocols and data format for the communication between electronic
equipment (TVE), on-board computer (OBC) of the tank vehicle and stationary equipment.
This document specifies the basic protocol FTL used in the communication (basic protocol layer), the
format and structure of FTL-data to be transmitted (data protocol layer) and describes the content of the
FTL-data.
This data protocol can be used for other application e.g. between stationary tank equipment and offices.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13799:2022(Main)
LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN 13799:2022

This European Standard specifies minimum requirements for design and testing of contents gauges, which are directly connected to transportable tanks, drums, cylinders and static LPG tanks above 0,5 l water capacity excluding those used for automotive containers. This European Standard does not apply to refineries or other process plants.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13121-1:2021(Main)
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
EN 13121-1:2021

This document gives requirements for specification and acceptance conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non-pressurised or pressurised, for use above ground.
Tanks and vessels for storage or processing of food, raw materials for food and potable water additionally have to be in compliance with relevant EU directives and applicable national standards and regulations.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12542:2020(Main)
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
EN 12542:2020

This European Standard specifies requirements for the design and manufacture of static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) with a volume not greater than 13 m³ and for installation above or below ground.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12285-3:2019(Main)
Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings
EN 12285-3:2019

This document specifies the product characteristics and test/assessment methods for workshop
fabricated cylindrical, horizontal steel tanks, single (type S) and double skin (type D) intended to be
used for the underground storage of water polluting liquids (both flammable and non-flammable),
specifically used for storage and/or supply of fuel for building heating/cooling systems, and of hot or
cold water not intended for human consumption at normal ambient temperature conditions (−20 °C to
+50 °C) within the following limits:
— from 800 mm up to 3000 mm nominal diameter and;
— up to a maximum overall length of 6 times the nominal diameter;
— for liquids with a maximum density of up to 1,1 kg/l and;
— with an operating pressure (Po) of maximum 50 kPa (0,5 bar(g)) and minimum – 5 kPa (–50
mbar(g)) and;
— for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not
exceed 5 × 10−3 m2/s.
Two tank types are distinguished:
— Type S: Single skin;
— Type D: Double skin.
Tanks designed to this document allow for an earth cover of up to 1,5 m. If there are imposed traffic
loads or a greater earth cover, calculation will occur.
This document is not applicable to tanks installed in industrial processes or in petrol stations, nor to
loads and special measures necessary in areas subject to risk of earthquakes and/or to flooding.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12285-1:2018(Main)
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings
EN 12285-1:2018

This document specifies the product characteristics and test methods for workshop fabricated cylindrical,
horizontal steel tanks, single (type S) and double skin (type D) intended to be used for the underground
storage of water polluting liquids (both flammable and non-flammable) and installed in industrial processes
or in petrol stations at normal ambient temperature conditions (−20 °C to +50 °C) within the following
limits:
— from 800 mm up to 3 000 mm nominal diameter and;
— up to a maximum overall length of 6 times the nominal diameter;
— with an operating pressure (Po) of maximum 50 kPa (0,5 bar(g)) and minimum – 5 kPa (–50 mbar(g))
and;
— for double skin tanks with a vacuum leak detection system where the kinematic viscosity does not
exceed 5 × 10−3 m2/s.
Tanks designed to this standard allow for an earth cover of up to 1,5 m. If there are imposed traffic loads or a
greater earth cover, calculation is expected to be carried out.
This document is not applicable to tanks used for storage and/or supply of fuel/gas for building
heating/cooling systems, and of hot or cold water not intended for human consumption, nor to loads and
special measures necessary in areas subject to risk of earthquakes.
Guidance on installation of tanks is presented in Annex A, which does not include special measures that
might be necessary in areas subject to flooding.
This document is not applicable for the storage of liquids having dangerous goods classes listed in Table 1
because of the special dangers involved.

  • Standard
    119 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 13121-5:2018(Main)
GRP tanks and vessels for use above ground - Part 5: Example calculation of a GRP-vessel
CEN/TR 13121-5:2017

This Technical Report gives guidance for the design of a vessel using the standard EN 13121-3 GRP tanks and vessels for use above ground. The calculation is done according to the advanced design method given in EN 13121-3:2016, 7.9.3 with approved laminates and laminate properties.

  • Technical report
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13160-3:2016(Main)
Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
EN 13160-3:2016

This standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits based on the drop of the liquid level in the leak detector header tank. The kits are usually composed of:
- sensing device;
- evaluation device;
- alarm device.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13160-5:2016(Main)
Leak detection systems - Part 5: Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems
EN 13160-5:2016

This standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits, based upon volumetric loss from within the tank or pressurised pipework system. The kits are usually composed by:
- measuring device
; - evaluation device
; - alarm device

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day