SIST EN 12207:2017
(Main)Windows and doors - Air permeability - Classification
Windows and doors - Air permeability - Classification
This European Standard defines the classification of test results for completely assembled windows and external and internal pedestrian doorsets of any materials after testing in accordance with FprEN 1026.
Fenster und Türen - Lutfdurchlässigkeit - Klassifizierung
Diese Norm legt die Klassifizierung von Prüfergebnissen für vollständig zusammengebaute Fenster und Außen- und Innentüren und aller Materialien, die nach EN 1026 geprüft wurden, fest.
Fenêtres et portes - Perméabilité à l'air - Classification
La présente norme européenne définit la classification des résultats d'essai des fenêtres entièrement assemblées et des blocs-portes extérieurs et intérieurs pour piétons, quels que soient leurs matériaux constitutifs, après essai réalisé conformément au EN 1026.
Okna in vrata - Prepustnost zraka na pripirah - Klasifikacija
Ta evropski standard obravnava razvrščanje preskusnih rezultatov za v celoti sestavljena okna ter zunanja in notranja vrata iz katerih koli materialov po izvedenem preskušanju v skladu s standardom FprEN 1026.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Okna in vrata - Prepustnost zraka na pripirah - KlasifikacijaFenster und Türen - Lutfdurchlässigkeit - KlassifizierungFenêtres et portes - Perméabilité à l'air - ClassificationWindows and doors - Air permeability - Classification91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12207:2016SIST EN 12207:2017en,fr,de01-februar-2017SIST EN 12207:2017SLOVENSKI
STANDARDSIST EN 12207:20001DGRPHãþD
SIST EN 12207:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12207
December
t r s x ICS
{ sä r x rä w r Supersedes EN
s t t r yã s { { {English Version
Windows and doors æ Air permeability æ Classification Fenêtres et portes æ Perméabilité à l 5air æ Classification Fenster und Türen æ Luftdurchlässigkeit æ Klassifizierung This European Standard was approved by CEN on
s w October
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t t r yã t r s x ESIST EN 12207:2017
EN 12207:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Classification . 4 4.1 General . 4 4.2 Classification based on the air permeability related to the overall area . 4 4.3 Classification based on the air permeability related to the length of opening joint(s) . 4 4.4 Definition of the classes . 4 4.5 Classification based on the overall area . 5 4.5.1 Classification for windows and pedestrian doorsets . 5 4.5.2 Classification for internal pedestrian doorsets . 5 4.6 Classification based on opening joint length. 6 4.6.1 Classification for windows and pedestrian doorsets . 6 4.6.2 Classification for internal pedestrian doorsets . 6 4.7 Relation between the classifications based on the overall area and the length of the opening joint . 6 5 Classification report . 7 Annex A (normative)
Upper limits of classes for windows, external and internal pedestrian doorsets . 8
SIST EN 12207:2017
EN 12207:2016 (E) 3 European foreword This document (EN 12207:2016) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12207:1999. The revision of this European Standard clarifies only the classification method and does not affect existing classification evidence of EN 12207:1999. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12207:2017
EN 12207:2016 (E) 4 1 Scope This European Standard defines the classification of test results for: — windows; and — external and internal pedestrian doorsets;
complet
...
SLOVENSKI STANDARD
oSIST prEN 12207:2015
01-januar-2015
Okna in vrata - Prepustnost zraka na pripirah - Klasifikacija
Windows and doors - Air permeability - Classification
Fenster und Türen - Lutfdurchlässigkeit - Klassifizierung
Fenêtres et portes - Perméabilité à l'air - Classification
Ta slovenski standard je istoveten z: prEN 12207 rev
ICS:
91.060.50 Vrata in okna Doors and windows
oSIST prEN 12207:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12207:2015
---------------------- Page: 2 ----------------------
oSIST prEN 12207:2015
EUROPEAN STANDARD
DRAFT
prEN 12207 rev
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2014
ICS 91.060.50 Will supersede EN 12207:1999
English Version
Windows and doors - Air permeability - Classification
Fenêtres et portes - Perméabilité à l'air - Classification Fenster und Türen - Lutfdurchlässigkeit - Klassifizierung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12207 rev:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12207:2015
prEN 12207:2014 (E)
Contents
Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Classification .4
4.1 Classification based on the air permeability of the overall area .4
4.2 Classification based on the air permeability of the opening joints .4
4.3 Definition of the classes .4
4.4 Classification based on the overall area .5
4.4.1 Classification for windows and pedestrian doorsets .5
4.4.2 Classification for internal pedestrian doorsets .5
4.5 Classification based on joint length .6
4.5.1 Classification for windows and pedestrian doorsets .6
4.5.2 Classification for internal pedestrian doorsets .6
4.6 Relation between the classifications based on the overall area and the length of the
opening joint .6
5 Classification report .6
2
---------------------- Page: 4 ----------------------
oSIST prEN 12207:2015
prEN 12207:2014 (E)
Foreword
This document (prEN 12207:2014) has been prepared by Technical Committee CEN/TC 33 “Doors, windows,
shutters, building hardware and curtain walling”, the secretariat of which is held by AFNO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.