SIST EN IEC 62923-2:2019

Maritime navigation and radiocommunication equipment and systems - Bridge alert management - Part 2: Alert and cluster identifiers and other additional features (IEC 62923-2:2018)

This part of IEC 62923 specifies standard alert identifiers and reserved cluster identifiers to
be used when applying bridge alert management. The intent is to reduce the number of
different identifiers used for similar alerts as much as possible.

Navigations- und Funkkommunikationsgeräte und -Systeme für die Schifffahrt - Brücken Alarm-Management - Teil 2: Alarm- und Gruppenkennzeichen und weitere Zusatzfunktionen (IEC 62923-2:2018)

Matériels et systèmes de navigation et de radiocommunication maritimes – Gestion des alertes à la passerelle – Partie 2: Identifiants d'alerte et de groupe et autres caractéristiques supplémentaires (IEC 62923-2:2018)

L'IEC 62923-2:2018 spécifie les identifiants d'alerte normalisés et les identifiants de groupe réservés à utiliser lors de la gestion des alertes à la passerelle. L’objectif est de réduire, dans toute la mesure du possible, le nombre d'identifiants différents utilisés pour des alertes similaires.

Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Upravljanje alarmov na mostu - 2. del: Identifikatorji alarmov in skupin ter druge dodatne lastnosti (IEC 62923-2:2018)

Ta del standarda IEC 62923 določa standardne identifikatorje alarmov in rezervirane identifikatorje skupin, ki se uporabljajo pri upravljanju alarmov na mostu. Namen je kar najbolj zmanjšati število različnih identifikatorjev, ki se uporabljajo za podobna opozorila.

General Information

• Status: Published
• Publication Date: 11-Dec-2018
• ICS: 47.020.70 - Navigation and control equipment
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Nov-2018
• Due Date: 14-Jan-2019
• Completion Date: 12-Dec-2018
• Ref Project: EN IEC 62923-2:2018 - Maritime navigation and radiocommunication equipment and systems - Bridge alert management - Part 2: Alert and cluster identifiers and other additional features

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62923-2:2019
01-januar-2019
Pomorska navigacijska in radiokomunikacijska oprema in sistemi - Upravljanje
alarmov na mostu - 2. del: Identifikatorji alarmov in skupin ter druge dodatne
lastnosti (IEC 62923-2:2018)
Maritime navigation and radiocommunication equipment and systems - Bridge alert
management - Part 2: Alert and cluster identifiers and other additional features (IEC
62923-2:2018)
Navigations- und Funkkommunikationsgeräte und -Systeme für die Schifffahrt - Brücken
Alarm-Management - Teil 2: Alarm- und Gruppenkennzeichen und weitere
Zusatzfunktionen (IEC 62923-2:2018)
Matériels et systèmes de navigation et de radiocommunication maritimes – Gestion des
alertes à la passerelle – Partie 2: Identifiants d'alerte et de groupe et autres
caractéristiques supplémentaires (IEC 62923-2:2018)
Ta slovenski standard je istoveten z: EN IEC 62923-2:2018
ICS:
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN IEC 62923-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62923-2:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 62923-2:2019


EUROPEAN STANDARD EN IEC 62923-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2018
ICS 47.020.70

English Version
Maritime navigation and radiocommunication equipment and
systems - Bridge alert management - Part 2: Alert and cluster
identifiers and other additional features
(IEC 62923-2:2018)
Matériels et systèmes de navigation et de Navigations- und Funkkommunikationsgeräte und -Systeme
radiocommunication maritimes - Gestion des alertes à la für die Schifffahrt - Brücken Alarm-Management - Teil 2:
passerelle - Partie 2: Identifiants d'alerte et de groupe et Alarm- und Gruppenkennzeichen und weitere
autres caractéristiques supplémentaires Zusatzfunktionen
(IEC 62923-2:2018) (IEC 62923-2:2018)
This European Standard was approved by CENELEC on 2018-10-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62923-2:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62923-2:2019
EN IEC 62923-2:2018 (E)
European foreword
The text of document 80/893/FDIS, future edition 1 of IEC 62923-2, prepared by IEC/TC 80 "Maritime
navigation and radiocommunication equipment and systems" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62923-2:2018.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2019-07-03
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2021-10-03
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62923-2:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61924-2 NOTE Harmonized as EN 61924-2


2

---------------------- Page: 4 ----------------------

SIST EN IEC 62923-2:2019
EN IEC 62923-2:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62923-1 -  Maritime navigation and radiocommunication EN IEC 62923-1 -
equipment and systems - Bridge alert management -
Part 1: Operational and performance requirements,
methods of testing and required test results
IMO SOLAS -  Convention for safety of life at sea (SOLAS) - -
IMO SOLAS 1974 -  Amendments concerning Radiocommunications for - -
Amendments the Global maritime distress and safety system
(GMDSS)
IMO A.481(XII) -  Principles of safe manning - -
IMO Resolution -  Recommendation on performance standards for a - -
MSC.128(75) bridge navigational watch alarm system (BNWAS)
IMO FSS Code International Code of Fire Safety Systems - -

3

---------------------- Page: 5 ----------------------

SIST EN IEC 62923-2:2019

---------------------- Page: 6 ----------------------

SIST EN IEC 62923-2:2019



IEC 62923-2

®


Edition 1.0 2018-08




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Maritime navigation and radiocommunication equipment and systems – Bridge

alert management –

Part 2: Alert and cluster identifiers and other additional features




Matériels et systèmes de navigation et de radiocommunication maritimes –

Gestion des alertes à la passerelle –


Partie 2: Identifiants d'alerte et de groupe et autres caractéristiques

supplémentaires












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 47.020.70 ISBN 978-2-8322-5994-8




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 62923-2:2019
– 2 – IEC 62923-2:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Alert identifiers . 6
4.1 Requirements . 6
4.2 Method of test and required results . 7
5 Reserved cluster identifiers . 7
5.1 Requirements . 7
5.2 Method of test and required results . 7
Annex A (normative) Alert identifiers . 8
A.1 General . 8
A.2 Alert identifiers for IMO mandatory alerts . 11
A.3 Alert identifiers for IEC and ISO required alerts. 13
Annex B (normative) Reserved cluster identifiers . 18
Bibliography . 19

Table A.1 – Standard alert identifiers . 9
Table A.2 – Alert identifiers for IMO A.1021(26) mandatory alerts derived from Table A.1 . 12
Table A.3 – Alert identifiers for IEC/ISO required alerts derived from Table A.1 . 14
Table B.1 – List of reserved cluster identifiers . 18

---------------------- Page: 8 ----------------------

SIST EN IEC 62923-2:2019
IEC 62923-2:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

MARITIME NAVIGATION AND RADIOCOMMUNICATION
EQUIPMENT AND SYSTEMS – BRIDGE ALERT MANAGEMENT –

Part 2: Alert and cluster identifiers and other additional features

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates
closely with the International Organization for Standardization (ISO) in accordance with conditions determined
by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62923-2 has been prepared by IEC technical committee 80:
Maritime navigation and radiocommunication equipment and systems.
The text of this International Standard is based on the following documents:
FDIS Report on voting
80/893/FDIS 80/896/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

SIST EN IEC 62923-2:2019
– 4 – IEC 62923-2:2018 © IEC 2018
A list of all parts in the IEC 62923 series, published under the general title Maritime
navigation and radiocommunication equipment and systems – Bridge alert management, can
be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN IEC 62923-2:2019
IEC 62923-2:2018 © IEC 2018 – 5 –
INTRODUCTION
This document is written to support the implementation of IEC 62923-1, through the definition
of harmonized machine readable alert identifiers that can be used to facilitate the
implementation of responsibility transfer.
References are made to IEC 62923-2 in other standards. Many IEC standards involve alert
communications to which bridge alert management principles apply. This includes
interconnections between equipment to transfer alerts. Many standards define alerts for which
alert identifiers could be applied to enable machine-reading of these alerts.
It is important to coordinate the alert identifiers, to maintain machine-readability and to
prevent double use of an identifier. Due to the development of standards, it is important to
maintain this list.
This edition of the document contains the alert identifiers which have defined at the time of
publication. As bridge alert management is introduced into maritime navigation and
radiocommunication equipment, alert identifiers will be added into equipment standards. It is
intended that later editions of this document will include the alert identifiers subsequently
defined in the equipment standards.

---------------------- Page: 11 ----------------------

SIST EN IEC 62923-2:2019
– 6 – IEC 62923-2:2018 © IEC 2018
MARITIME NAVIGATION AND RADIOCOMMUNICATION
EQUIPMENT AND SYSTEMS – BRIDGE ALERT MANAGEMENT –

Part 2: Alert and cluster identifiers and other additional features



1 Scope
This part of IEC 62923 specifies standard alert identifiers and reserved cluster identifiers to
be used when applying bridge alert management. The intent is to reduce the number of
different identifiers used for similar alerts as much as possible.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 62923-1, Maritime navigation and radiocommunication equipment and systems – Bridge
alert management – Part 1: Operational and performance requirements, methods of testing
and required test results
IMO, International Convention for the safety of life at sea (SOLAS),1974 as amended
IMO A.481(XII), Principles of safe manning
IMO MSC.128(75), Performance standards for a bridge navigational watch alarm system
(BNWAS)
IMO FSS Code, International Code of Fire Safety Systems
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62923-1 apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Alert identifiers
4.1 Requirements
When defining alerts listed in Annex A, the corresponding alert identifiers defined in Annex A
shall be used.
Alerts not listed in Annex A shall be assigned an alert identifier in the range 10000 to
9999999.

---------------------- Page: 12 ----------------------

SIST EN IEC 62923-2:2019
IEC 62923-2:2018 © IEC 2018 – 7 –
The manufacturer shall provide a list of all alerts in the EUT, together with their assigned alert
identifiers.
4.2 Method of test and required results
Confirm by inspection of manufacturer’s documentation that:
• if the manufacturer has defined alerts listed in Annex A, the corresponding alert identifiers
are assigned as specified in Annex A; and
• if the manufacturer has defined alerts not listed in Annex A, the corresponding alert
identifiers are assigned within the range 10000 to 9999999.
If applicable, cause up to 5 alerts listed in Annex A and confirm by observation that the
reported ALF messages are indicating the appropriate identifier.
If applicable, cause up to 10 alerts not listed in Annex A and confirm by observation that the
reported ALF messages are indicating an identifier in the range 10000 to 9999999.
5 Reserved cluster identifiers
5.1 Requirements
When defining clusters (see IEC 62923-1), the cluster identifiers defined in Annex B shall be
used for their intended purpose. Only when the cluster identifiers defined in Annex B are not
applicable, the free range of cluster identifiers as defined in IEC 62923-1 shall be used.
The manufacturer shall provide a list of all alerts in the EUT, together with their assigned
...