SIST EN ISO 4628-6:2023
(Main)Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2023)
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628-6:2023)
This document provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated. In using this method, it is essential that care be taken to distinguish between true degradation products and adhering dirt, particularly when chalking is slight.
Beschichtungsstoffe - Beurteilung der Menge und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 6: Bewertung des Kreidungsgrades nach dem Klebebandverfahren (ISO 4628-6:2023)
Dieses Dokument enthält Vergleichsbilder und ein Verfahren zur Bewertung des Kreidungsgrades von Beschichtungen. Es legt ebenfalls ein Verfahren zum Bewerten des Kreidungsgrades fest. Bei diesem Verfahren ist es wichtig, zwischen Abbauprodukten der Beschichtung und anhaftendem Schmutz zu unterscheiden, besonders, wenn die Kreidung nur gering ist.
WICHTIG — Für die Bestimmung des Kreidungsgrades mit dem Klebebandverfahren ist es erforderlich, Vergleichsbilder zu verwenden, die in diesem Teil von ISO 4628 enthalten sind. Unter Berücksichtigung der Tatsache, dass elektronische Kopien dieser Vergleichsbilder unterschiedlich sein können, je nachdem, ob sie am Bildschirm betrachtet oder ausgedruckt werden, wird für Vergleichsprüfungen empfohlen, nur Vergleichsbilder aus der gedruckten Version dieses Teiles von ISO 4628 zu verwenden, die direkt von den ISO Mitgliedern oder deren Vertriebshändlern beschafft wurde.
Peintures et vernis - Évaluation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif (ISO 4628-6:2023)
L'ISO 4628-6:2011 fournit des clichés de référence pour désigner le degré de farinage des revêtements de peinture. Elle décrit également une méthode pour coter le degré de farinage.
Barve in laki - Vrednotenje obsega in velikosti poškodb ter intenzivnosti enakomernih sprememb videza - 6. del: Ocenjevanje stopnje kredanja z lepilnim trakom (ISO 4628-6:2023)
Ta dokument podaja slikovne referenčne standarde za določanje stopnje kredanja barvnih premazov. Opisuje tudi metodo za ocenjevanje stopnje kredanja. Pri uporabi te metode je bistveno razlikovati med dejanskimi razgradnimi produkti in umazanijo, ki se drži površine, zlasti pri rahlem kredanju.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4628-6:2023
01-december-2023
Nadomešča:
SIST EN ISO 4628-6:2011
Barve in laki - Vrednotenje obsega in velikosti poškodb ter intenzivnosti
enakomernih sprememb videza - 6. del: Ocenjevanje stopnje kredanja z lepilnim
trakom (ISO 4628-6:2023)
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of
uniform changes in appearance - Part 6: Assessment of degree of chalking by tape
method (ISO 4628-6:2023)
Beschichtungsstoffe - Beurteilung der Menge und der Größe von Schäden und der
Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 6: Bewertung des
Kreidungsgrades nach dem Klebebandverfahren (ISO 4628-6:2023)
Peintures et vernis - Évaluation de la quantité et de la dimension des défauts, et de
l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de
farinage par la méthode du ruban adhésif (ISO 4628-6:2023)
Ta slovenski standard je istoveten z: EN ISO 4628-6:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 4628-6:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4628-6:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 4628-6:2023
EN ISO 4628-6
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 4628-6:2011
English Version
Paints and varnishes - Evaluation of quantity and size of
defects, and of intensity of uniform changes in appearance
- Part 6: Assessment of degree of chalking by tape method
(ISO 4628-6:2023)
Peintures et vernis - Évaluation de la quantité et de la Beschichtungsstoffe - Beurteilung der Menge und der
dimension des défauts, et de l'intensité des Größe von Schäden und der Intensität von
changements uniformes d'aspect - Partie 6: Évaluation gleichmäßigen Veränderungen im Aussehen - Teil 6:
du degré de farinage par la méthode du ruban adhésif Bewertung des Kreidungsgrades nach dem
(ISO 4628-6:2023) Klebebandverfahren (ISO 4628-6:2023)
This European Standard was approved by CEN on 15 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4628-6:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4628-6:2023
EN ISO 4628-6:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4628-6:2023
EN ISO 4628-6:2023 (E)
European foreword
This document (EN ISO 4628-6:2023) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4628-6:2011.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regula
...
SLOVENSKI STANDARD
oSIST prEN ISO 4628-6:2023
01-maj-2023
Barve in laki - Vrednotenje obsega in velikosti poškodb ter intenzivnosti
enakomernih sprememb videza - 6. del: Ocenjevanje stopnje kredanja z lepilnim
trakom (ISO/DIS 4628-6:2023)
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of
uniform changes in appearance - Part 6: Assessment of degree of chalking by tape
method (ISO/DIS 4628-6:2023)
Beschichtungsstoffe - Beurteilung der Menge und der Größe von Schäden und der
Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 6: Bewertung des
Kreidungsgrades nach dem Klebebandverfahren (ISO/DIS 4628-6:2023)
Peintures et vernis - Évaluation de la quantité et de la dimension des défauts, et de
l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de
farinage par la méthode du ruban adhésif (ISO/DIS 4628-6:2023)
Ta slovenski standard je istoveten z: prEN ISO 4628-6
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 4628-6:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 4628-6:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 4628-6:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4628-6
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-03-22 2023-06-14
Paints and varnishes — Evaluation of quantity and
size of defects, and of intensity of uniform changes in
appearance —
Part 6:
Assessment of degree of chalking by tape method
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4628-6:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 4628-6:2023
ISO/DIS 4628-6:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4628-6
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
Paints and varnishes — Evaluation of quantity and
size of defects, and of intensity of uniform changes in
appearance —
Part 6:
Assessment of degree of chalking by tape method
ICS: 87.040
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 4628-6:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 4628-6:2023
ISO/DIS 4628-6:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.