Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method (ISO 4628‑6:2023)

ISO 4628-6:2011 provides pictorial reference standards for designating the degree of chalking of paint coatings. It also describes a method by which the degree of chalking is rated.

Beschichtungsstoffe - Beurteilung der Menge und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 6: Bewertung des Kreidungsgrades nach dem Klebebandverfahren (ISO 4628‑6:2023)

Dieses Dokument enthält Vergleichsbilder und ein Verfahren zur Bewertung des Kreidungsgrades von Beschichtungen. Es legt ebenfalls ein Verfahren zum Bewerten des Kreidungsgrades fest. Bei diesem Verfahren ist es wichtig, zwischen Abbauprodukten der Beschichtung und anhaftendem Schmutz zu unterscheiden, besonders, wenn die Kreidung nur gering ist.
WICHTIG — Für die Bestimmung des Kreidungsgrades mit dem Klebebandverfahren ist es erforderlich, Vergleichsbilder zu verwenden, die in diesem Dokument enthalten sind. Unter Berücksichtigung der Tatsache, dass elektronische Kopien dieser Vergleichsbilder unterschiedlich sein können, je nachdem, ob sie am Bildschirm betrachtet oder ausgedruckt werden, wird für Vergleichsprüfungen empfohlen, nur Vergleichsbilder aus der gedruckten Version dieses Dokumentes zu verwenden, die direkt von den ISO Mitgliedern oder deren Vertriebshändlern beschafft wurde.

Peintures et vernis - Évaluation de la quantité et de la dimension des défauts, et de l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de farinage par la méthode du ruban adhésif (ISO 4628‑6:2023)

L'ISO 4628-6:2011 fournit des clichés de référence pour désigner le degré de farinage des revêtements de peinture. Elle décrit également une méthode pour coter le degré de farinage.

Barve in laki - Vrednotenje obsega in velikosti poškodb ter intenzivnosti enakomernih sprememb videza - 6. del: Ocenjevanje stopnje kredanja z lepilnim trakom (ISO 4628-6:2023)

Ta dokument podaja slikovne referenčne standarde za določanje stopnje kredanja barvnih premazov. Opisuje tudi metodo za ocenjevanje stopnje kredanja. Pri uporabi te metode je bistveno razlikovati med dejanskimi razgradnimi produkti in umazanijo, ki se drži površine, zlasti pri rahlem kredanju.

General Information

Status
Published
Publication Date
24-Oct-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Oct-2023
Completion Date
25-Oct-2023

Relations

Buy Standard

Standard
EN ISO 4628-6:2023
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2023
Nadomešča:
SIST EN ISO 4628-6:2011
Barve in laki - Vrednotenje obsega in velikosti poškodb ter intenzivnosti
enakomernih sprememb videza - 6. del: Ocenjevanje stopnje kredanja z lepilnim
trakom (ISO 4628-6:2023)
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of
uniform changes in appearance - Part 6: Assessment of degree of chalking by tape
method (ISO 4628-6:2023)
Beschichtungsstoffe - Beurteilung der Menge und der Größe von Schäden und der
Intensität von gleichmäßigen Veränderungen im Aussehen - Teil 6: Bewertung des
Kreidungsgrades nach dem Klebebandverfahren (ISO 4628-6:2023)
Peintures et vernis - Évaluation de la quantité et de la dimension des défauts, et de
l'intensité des changements uniformes d'aspect - Partie 6: Évaluation du degré de
farinage par la méthode du ruban adhésif (ISO 4628-6:2023)
Ta slovenski standard je istoveten z: EN ISO 4628-6:2023
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 4628-6
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 4628-6:2011
English Version
Paints and varnishes - Evaluation of quantity and size of
defects, and of intensity of uniform changes in appearance
- Part 6: Assessment of degree of chalking by tape method
(ISO 4628-6:2023)
Peintures et vernis - Évaluation de la quantité et de la Beschichtungsstoffe - Beurteilung der Menge und der
dimension des défauts, et de l'intensité des Größe von Schäden und der Intensität von
changements uniformes d'aspect - Partie 6: Évaluation gleichmäßigen Veränderungen im Aussehen - Teil 6:
du degré de farinage par la méthode du ruban adhésif Bewertung des Kreidungsgrades nach dem
(ISO 4628-6:2023) Klebebandverfahren (ISO 4628-6:2023)
This European Standard was approved by CEN on 15 July 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4628-6:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 4628-6:2023) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4628-6:2011.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4628-6:2023 has been approved by CEN as EN ISO 4628-6:2023 without any
modification.
INTERNATIONAL ISO
STANDARD 4628-6
Fourth edition
2023-10
Paints and varnishes — Evaluation
of quantity and size of defects, and
of intensity of uniform changes in
appearance —
Part 6:
Assessment of degree of chalking by
tape method
Peintures et vernis — Évaluation de la quantité et de la dimension des
défauts, et de l'intensité des changements uniformes d'aspect —
Partie 6: Évaluation du degré de farinage par la méthode du ruban
adhésif
Reference number
ISO 4628-6:2023(E)
ISO 4628-6:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 4628-6:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Materials . 2
6 Procedure .2
7 Rating . 3
8 Test report . 4
Bibliography . 5
iii
ISO 4628-6:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee
SC 9, General test methods for paints and varnishes, in collaboration with the European Committee for
Standardization (CEN) Technical Committee CEN/TC 139, Paints and varnishes, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This fourth edition cancels and replaces the third edition (ISO 4628-6:2011), which has been technically
revised. The main changes are as follows:
— the title has been shortened;
— the definition of chalking (3.1) has been changed to the entry in ISO 4618:2023;
— the normative references have been updated.
A list of all parts in the ISO 4628 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO 4628-6:2023(E)
Introduction
ISO 4628-1 specifies the system for designating the quantity and size of defects and the intensity of
uniform changes of coatings, and outlines the general principles of the system. This system is intended
to be used especially for defects caused by ageing and weathering, and for uniform changes such as
colour changes, for example yellowing.
The other parts of the ISO 4628 series provide pictorial standards or other means for evaluating
particular types of defect. As far as possible, already existing evaluation schemes have been used as the
basis.
1)
The chalking scale used in the first edition (i.e. ISO 4628-6:1990 , Figure 1), in the third edition (i.e.
1)
ISO 4628-6:2011 , Figure 1) and in this document, consists of photographic pictures of adhesive tapes
with different amounts of pigment particles adhering to them. The pigment particles are not evenly
distributed over each tape. The lower ratings in particular (i.e. 1 to 3) give the impression of cloudiness.
Nevertheless, all five ratings in the scale used in the first edition (ISO 4628-6:1990) and in this document
are sufficiently different for visual-assessment purposes.
1)
The scale used in the second edition (i.e. ISO 4628-6:2007 , Figure 1) was computer-generated. Thus,
the white dots representing the pigment particles were distributed very evenly over the tape, with
the result that not all the ratings differed sufficiently well from each other for visual assessment to be
carried out. While ratings 0,5 to 3,0 on the black background on the scale in ISO 4628-6:2007 could be
differentiated sufficiently well from each other, it was hardly possible to visually differentiate between
ratings above 3,0, especially ratings 4 and 5. On the white background, the difference between ratings
0,5, 1,0 and 1,5 was not easy to discern. The differences between ratings 1,5 to 5,0 were more evident,
however.
Comparing the scale in ISO 4628-6:1990 with the scale in ISO 4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.