SIST EN ISO 13934-2:2014
(Main)Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014)
EN-ISO 13934-2 specifies a procedure for the determination of the maximum force of textile fabrics known as the grab test. The method is mainly applicable to woven textile fabrics including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre and mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns. The method specifies the determination of the maximum force of test specimens in equilibrium with the standard atmosphere for testing and of test specimens in the wet state. The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
Textilien - Zugeigenschaften von textilen Flächengebilden - Teil 2: Bestimmung der Höchstzugkraft mit dem Grab- Zugversuch (ISO 13934-2:2014)
Dieser Teil von ISO 13934 legt ein Verfahren zur Bestimmung der Höchstzugkraft an textilen Flächengebilden mit dem Grab-Zugversuch fest.
ANMERKUNG ISO 13934-1 beschreibt das als Streifen-Zugversuch bekannte Verfahren.
Das Verfahren gilt hauptsächlich für gewebte textile Flächengebilde, einschließlich Flächengebilde, die durch das Vorhandensein einer Elastomerfaser sowie eine mechanische oder chemische Behandlung Stretcheigen-schaften aufweisen. Das Verfahren kann jedoch auch auf Flächengebilde angewendet werden, die nach anderen Techniken hergestellt wurden. Üblicherweise ist das Verfahren nicht auf Geotextilien, Vliesstoffe, beschichtete Flächengebilde, textile Glasfasergewebe und Flächengebilde aus Kohlenstofffasern oder Polyolefinfasergarnen anwendbar.
Das Verfahren legt die Bestimmung der Höchstzugkraft von Messproben im Gleichgewichtszustand mit dem Normalklima zum Prüfen und von Messproben in nassem Zustand fest.
Für dieses Verfahren sind nur Zugprüfmaschinen mit konstanter Prüfgeschwindigkeit (CRE) einsetzbar.
Textiles - Propriétés des étoffes en traction - Partie 2: Détermination de la force maximale par la méthode d'arrachement (Grab test) (ISO 13934-2:2014)
l'ISO 13934-2:2014 spécifie une méthode pour la détermination de la force maximale des étoffes textiles dite méthode d'arrachement. La méthode s'applique essentiellement aux étoffes tissées, y compris les étoffes présentant des caractéristiques extensibles en raison de la présence de fibres élastomères, d'un traitement mécanique ou chimique. Elle peut être appliquée aux étoffes produites par d'autres techniques. Elle n'est normalement pas applicable aux géotextiles, aux non-tissés, aux étoffes revêtues, aux tissus en verre textile et aux étoffes en fibres de carbone ou en fils provenant de bandelettes de polyoléfine. La méthode spécifie la détermination de la force maximale des éprouvettes en équilibre dans l'atmosphère normalisée pour les essais et des éprouvettes humides.La présente méthode est restreinte à l'utilisation d'appareils d'essai à vitesse constante d'allongement.
Tekstilije - Natezne lastnosti ploskovnih tekstilij - 2. del: Ugotavljanje največje sile po Grabovi metodi (ISO 13934-2:2014)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13934-2:2014
01-april-2014
1DGRPHãþD
SIST EN ISO 13934-2:1999
7HNVWLOLMH1DWH]QHODVWQRVWLSORVNRYQLKWHNVWLOLMGHO 8JRWDYOMDQMHQDMYHþMHVLOH
SR*UDERYLPHWRGL ,62
Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using
the grab method (ISO 13934-2:2014)
Textilien - Zugeigenschaften von textilen Flächengebilden - Teil 2: Bestimmung der
Höchstzugkraft mit dem Grab- Zugversuch (ISO 13934-2:2014)
Textiles - Propriétés des étoffes en traction - Partie 2: Détermination de la force
maximale par la méthode d'arrachement (Grab test) (ISO 13934-2:2014)
Ta slovenski standard je istoveten z: EN ISO 13934-2:2014
ICS:
59.080.30 Tkanine Textile fabrics
SIST EN ISO 13934-2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13934-2:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 13934-2:2014
EUROPEAN STANDARD
EN ISO 13934-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2014
ICS 59.080.30 Supersedes EN ISO 13934-2:1999
English Version
Textiles - Tensile properties of fabrics - Part 2: Determination of
maximum force using the grab method (ISO 13934-2:2014)
Textiles - Propriétés des étoffes en traction - Partie 2: Textilien - Zugeigenschaften von textilen Flächengebilden -
Détermination de la force maximale par la méthode Teil 2: Bestimmung der Höchstzugkraft mit dem Grab-
d'arrachement (Grab test) (ISO 13934-2:2014) Zugversuch (ISO 13934-2:2014)
This European Standard was approved by CEN on 30 December 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13934-2:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13934-2:2014
EN ISO 13934-2:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13934-2:2014
EN ISO 13934-2:2014 (E)
Foreword
This document (EN ISO 13934-2:2014) has been prepared by Technical Committee ISO/TC 38 “Textiles” in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2014, and conflicting national standards shall be withdrawn at
the latest by August 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13934-2:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13934-2:2014 has been approved by CEN as EN ISO 13934-2:2014 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 13934-2:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 13934-2:2014
INTERNATIONAL ISO
STANDARD 13934-2
Second edition
2014-02-01
Textiles — Tensile properties of
fabrics —
Part 2:
Determination of maximum force
using the grab method
Textiles — Propriétés des étoffes en traction —
Partie 2: Détermination de la force maximale par la méthode
d’arrachement (Grab test)
Reference number
ISO 13934-2:2014(E)
©
ISO 2014
---------------------- Page: 7 ----------------------
SIST EN ISO 13934-2:2014
ISO 13934-2:2014(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 13934-2:2014
ISO 13934-2:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Sampling . 2
6 Apparatus . 2
7 Atmosphere for conditioning and testing . 3
8 Preparation of test specimens . 3
8.1 General . 3
8.2 Dimensions . 4
8.3 Preparation of test specimens . 4
8.4 Wet test specimens . 4
9 Procedure. 4
9.1 Gauge length . 4
9.2 Rate of extension . 4
9.3 Mounting of test specimens . 4
9.4 Operation . 4
9.5 Tests on wet test specimens . 5
10 Calculation and expression of results . 5
11 Test report . 5
Annex A (informative) Suggested procedure for sampling . 6
Annex B (informative) Locations of test specimens cut from a laboratory sample .7
Annex C (informative) Arrangements of jaws for the grab test . 8
Bibliography . 9
© ISO 2014 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 13934-2:2014
ISO 13934-2:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 38, Textiles, Subcommittee SC 24, Conditioning
atmospheres and physical tests for textile fabrics.
This second edition cancels and replaces the first edition (ISO 13934-2: 1999), of which it constitutes a
minor revision.
ISO 13934 consists of the following parts, under the general title Textiles — Tensile properties of fabrics:
— Part 1: Determination of maximum force and elongation at maximum force using the strip method
— Part 2: Determination of maximum force using the grab method
iv © ISO 2014 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 13934-2:2014
ISO 13934-2:2014(E)
Introduction
This part of ISO 13934 has been prepared in the context of several test methods for determination of
certain mechanical properties of textiles using mainly tensile testing machines, e.g. tensile properties,
seam tensile properties, tear properties, and seam slippage. The procedure for these standards agrees
where appropriate. The results obtained by one of the methods should not be compared with those
obtained by the other methods.
© ISO 2014 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 13934-2:2014
---------------------- Page: 12 ----------------------
SIST EN ISO 13934-2:2014
INTERNATIONAL STANDARD ISO 13934-2:2014(E)
Textiles — Tensile properties of fabrics —
Part 2:
Determination of maximum force using the grab method
1 Scope
This part of ISO 13934 specifies a procedure for the determination of the maximum force of textile
fabrics known as the grab test.
NOTE ISO 13934-1 describes the method known as the strip test.
The method is mainly applicable to woven textile fabrics including fabrics whi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.