SIST EN ISO 15549:2019
(Main)Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019)
Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019)
This document defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance.
Zerstörungsfreie Prüfung - Wirbelstromprüfung - Allgemeine Grundlagen (ISO 15549:2019)
Dieses Dokument legt die allgemeinen Grundlagen für die zerstörungsfreie Prüfung von Produkten und Werkstoffen mit dem Wirbelstromverfahren fest, um eine definierte und wiederholbare Durchführung sicherzustellen.
Sie enthält Richtlinien für die Erstellung von Anwendungsdokumenten, die die speziellen Anforderungen für die Anwendung und den Gebrauch der Wirbelstromprüfung auf ein Prüfgut beschreiben.
Essais non destructifs - Contrôle par courants de Foucault - Principes généraux (ISO 15549:2019)
Le présent document spécifie les principes généraux applicables aux examens non destructifs de produits et de matériaux par la méthode des courants de Foucault permettant ainsi d'assurer un niveau de performance défini et reproductible.
Il comprend des lignes directrices pour la rédaction des documents d'application, qui décrivent les exigences spécifiques de l'utilisation et de la mise en œuvre de la méthode des courants de Foucault pour un produit donné.
Neporušitvene preiskave - Preskušanje z vrtinčnimi tokovi - Splošna načela (ISO 15549:2019)
Ta dokument določa splošna načela za uporabo pri neporušitvenih preiskavah izdelkov in materialov z vrtinčnimi tokovi, da se zagotovi določeno in ponovljivo zmogljivost.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15549:2019
01-november-2019
Nadomešča:
SIST EN ISO 15549:2011
Neporušitvene preiskave - Preskušanje z vrtinčnimi tokovi - Splošna načela (ISO
15549:2019)
Non-destructive testing - Eddy current testing - General principles (ISO 15549:2019)
Zerstörungsfreie Prüfung - Wirbelstromprüfung - Allgemeine Grundlagen (ISO
15549:2019)
Essais non destructifs - Contrôle par courants de Foucault - Principes généraux (ISO
15549:2019)
Ta slovenski standard je istoveten z: EN ISO 15549:2019
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN ISO 15549:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15549:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 15549:2019
EN ISO 15549
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 19.100 Supersedes EN ISO 15549:2010
English Version
Non-destructive testing - Eddy current testing - General
principles (ISO 15549:2019)
Essais non destructifs - Contrôle par courants de Zerstörungsfreie Prüfung - Wirbelstromprüfung -
Foucault - Principes généraux (ISO 15549:2019) Allgemeine Grundlagen (ISO 15549:2019)
This European Standard was approved by CEN on 28 April 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15549:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15549:2019
EN ISO 15549:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 15549:2019
EN ISO 15549:2019 (E)
European foreword
This document (EN ISO 15549:2019) has been prepared by Technical Committee ISO/TC 135 "Non-
destructive testing" in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing”
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15549:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15549:2019 has been approved by CEN as EN ISO 15549:2019 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 15549:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 15549:2019
INTERNATIONAL ISO
STANDARD 15549
Second edition
2019-04
Non-destructive testing — Eddy
current testing — General principles
Essais non destructifs — Contrôle par courants de Foucault —
Principes généraux
Reference number
ISO 15549:2019(E)
©
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 15549:2019
ISO 15549:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 15549:2019
ISO 15549:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General principles . 1
5 Qualification of personnel . 2
6 Purpose of examination and products to be tested . 2
7 Examination techniques . 2
8 Equipment . 3
8.1 Examination system . 3
8.2 Eddy current instrument . 4
8.3 Probe . 4
8.4 Reference test pieces . 4
9 Preparation of equipment . 4
9.1 Instrument settings . 4
9.2 Probe settings . 4
10 Verification of equipment . 5
10.1 Verification intervals . 5
10.2 Functional verification . 5
10.3 Preventive verification . 5
11 Preparation of the product to be tested . 5
11.1 Surface preparation . 5
11.2 Identification . 5
12 Examination . 6
12.1 Steps in the examination . 6
12.2 Examination coverage . 6
12.3 Signal characterization . 6
12.4 Acceptance criteria . 6
13 Documentation . 7
13.1 General . 7
13.2 Examination procedure . 7
13.3 Examination report . 8
Bibliography . 9
© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 15549:2019
ISO 15549:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 135, Non-destructive testing,
Subcommittee SC 4, Eddy current testing.
This second edition cancels and replaces the first edition (ISO 15549:2008), which has been technically
revised.
The main change compared to the previous edition is as follows:
— rewriting of Clause 5 "Qualification of personnel".
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 15549:2019
INTERNATIONAL STANDARD ISO 15549:2019(E)
Non-destructive testing — Eddy current testing — General
principles
1 Scope
This document defines the general principles to be applied to non-destructive eddy current examination
of products and materials in order to ensure defined and repeatable performance.
It includes guidelines for the preparation of application documents which describe the specific
requirements for the application of the eddy current method to a particular type of product.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 9712, Non-destructive testing — Qualification and certification of NDT personnel
1)
ISO 12718 , Non-des
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.