SIST EN 62453-1:2010
(Main)Field device tool interface specification -- Part 1: Overview and guidance
Field device tool interface specification -- Part 1: Overview and guidance
This part of IEC 62453 presents an overview and guidance for the IEC 62453 series. It . explains the structure and content of the IEC 62453 series (see Clause 5); . provides explanations of some aspects of the IEC 62453 series that are common to many of the parts of the series; . describes the relationship to some other standards.
Field Device Tool (FDT)-Schnittstellenspezifikation -- Teil 1: Überblick und Leitfaden
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 1: Vue générale et recommandations
La CEI 62453-1:2009 présente une vue générale et des recommandations pour la série CEI 62453. Elle explique la structure et le contenu de la série CEI 62453 (voir Article 5); fournit des explications de certains aspects de la série CEI 62453 qui sont communs à beaucoup de parties de la série; décrit la relation avec d'autres normes.
Specifikacija vmesnika orodja procesne naprave - 1. del: Pregled in vodilo (IEC 62453-1:2009)
Ta del IEC 62453 predstavlja pregled in vodilo za serijo IEC 62453. Razloži strukturo in vsebino serije IEC 62453 (glej Klavzulo 5), daje pojasnila nekaterih aspektov serije IEC 62453, ki so skupni številnim delom serije, opisuje odnos do nekaterih drugih standardov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62453-1:2010
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 1. del: Pregled in vodilo (IEC
62453-1:2009)
Field device tool interface specification -- Part 1: Overview and guidance
Field Device Tool (FDT)-Schnittstellenspezifikation -- Teil 1: Überblick und Leitfaden
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 1: Vue
générale et recommandations
Ta slovenski standard je istoveten z: EN 62453-1:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62453-1:2010
---------------------- Page: 2 ----------------------
SIST EN 62453-1:2010
EUROPEAN STANDARD
EN 62453-1
NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05; 35.110
English version
Field device tool (FDT) interface specification -
Part 1: Overview and guidance
(IEC 62453-1:2009)
Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 1: Vue générale Teil 1: Überblick und Leitfaden
et recommandations (IEC 62453-1:2009)
(CEI 62453-1:2009)
This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-1:2009 E
---------------------- Page: 3 ----------------------
SIST EN 62453-1:2010
EN 62453-1:2009 - 2 -
Foreword
The text of document 65E/123/FDIS, future edition 1 of IEC 62453-1, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-1 on
2009-08-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[5] IEC 61131 NOTE Harmonized in EN 61131 series (not modified).
[6] IEC 61499 NOTE Harmonized in EN 61499 series (not modified).
[7] IEC 61800-7 NOTE Harmonized in EN 61800-7 series (not modified).
[9] IEC 61915-1 NOTE Harmonized as EN 61915-1:2008 (not modified).
[10] IEC 62026 NOTE Harmonized in EN 62026 series (not modified).
[13] IEC 61804-2 NOTE Harmonized as EN 61804-2:2007 (not modified).
[14] IEC 61804-3 NOTE Harmonized as EN 61804-3:2007 (not modified).
[16] IEC 62453 NOTE Harmonized in EN 62453 series (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 62453-1:2010
- 3 - EN 62453-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61158 Series Industrial communication networks – EN 61158 Series
Fieldbus specifications
IEC 61784 Series Industrial communication networks – EN 61784 Series
Profiles
ISO/IEC 19501 2005 Information technology – – –
Open Distributed Processing –
Unified Modeling Language (UML)
---------------------- Page: 5 ----------------------
SIST EN 62453-1:2010
---------------------- Page: 6 ----------------------
SIST EN 62453-1:2010
IEC 62453-1
®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
Field device tool (FDT) interface specification –
Part 1: Overview and guidance
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
W
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1050-3
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST EN 62453-1:2010
– 2 – 62453-1 © IEC:2009(E)
CONTENTS
FOREWORD.4
INTRODUCTION.6
1 Scope.7
2 Normative references .7
3 Terms, definitions, symbols, abbreviations and conventions .7
3.1 Terms and definitions .7
3.2 Abbreviations .12
3.3 Conventions .12
4 FDT overview .12
4.1 State of the art .12
4.2 Objectives of FDT .13
4.2.1 General features.13
4.2.2 Device and module manufacturer benefits .14
4.2.3 System manufacturer and integrator benefits.14
4.2.4 Other applications .14
4.3 FDT model .15
4.3.1 General .15
4.3.2 Frame Applications.16
4.3.3 Device Type Manager.17
4.3.4 Communication Channel concept.18
4.3.5 Presentation object.20
5 Structure of the IEC 62453 series.20
5.1 Structure overview .20
5.2 Part 2 – Concepts and detailed description.21
5.3 Parts 3xy – Communication profile integration.22
5.3.1 General .22
5.3.2 Communication profile integration – IEC 61784 CPF 1.22
5.3.3 Communication profile integration – IEC 61784 CPF 2.22
5.3.4 Communication profile integration – IEC 61784 CP 3/1 and 3/2 .22
5.3.5 Communication profile integration – IEC 61784 CP 3/4, CP 3/5 and
22
3/6.
5.3.6 Communication profile integration – IEC 61784 CPF 6.22
5.3.7 Communication profile integration – IEC 61784 CPF 9.23
5.3.8 Communication profile integration – IEC 61784 CPF 15.23
5.4 Parts 4x – Object model integration profiles .23
5.4.1 General .23
5.4.2 Object model integration profile – Common object model.23
5.5 Parts 5xy – Communication profile implementation.23
5.5.1 General .23
5.5.2 Communication profile integration – IEC 61784 CPF 1.23
5.5.3 Communication profile integration – IEC 61784 CPF 2.24
5.5.4 Communication profile integration – IEC 61784 CP 3/1 and 3/2 .24
5.5.5 Communication profile integration – IEC 61784 CP 3/4, CP 3/5 and
3/6.24
5.5.6 Communication profile integration – IEC 61784 CPF 6.24
5.5.7 Communication profile integration – IEC 61784 CPF 9.24
5.5.8 Communication profile integration – IEC 61784 CPF 15.24
---------------------- Page: 8 ----------------------
SIST EN 62453-1:2010
62453-1 © IEC:2009(E) – 3 –
5.6 Parts 6x – DTM styleguides.25
5.6.1 General .25
5.6.2 Device Type Manager (DTM) styleguide for common object model .25
6 Relation of the IEC 62453 series to other standardization activities .25
7 Migration to DTM.29
8 How to read IEC 62453 .30
8.1 Architecture.30
8.2 Dynamic behavior.30
8.3 Structured data types .31
8.4 Fieldbus communication .31
Annex A (informative) UML notation.32
Annex B (informative) Implementation policy.37
Bibliography.38
Figure 1 − Different tools and fieldbusses result in limited integration .13
Figure 2 – Full integration of all devices and modules into a homogeneous system.14
Figure 3 – General architecture and components .15
Figure 4 – FDT software architecture .17
Figure 5 – General FDT client/server relationship .18
Figure 6 – Typical FDT channel architecture .19
Figure 7 – Channel/parameter relationship.20
Figure 8 – Structure of the IEC 62453 series .20
Figure 9 – Standards related to IEC 62453 – in an automation hierarchy .26
Figure 10 – Standards related to IEC 62453 – grouped by purpose.28
Figure 11 – DTM – implementations.30
Figure A.1 – Note .32
Figure A.2 – Class .32
Figure A.3 – Association .32
Figure A.4 – Composition.33
Figure A.5 – Aggregation .33
Figure A.6 – Dependency .33
Figure A.7 – Abstract class, generalization and interface .33
Figure A.8 – Multiplicity .34
Figure A.9 – Elements of UML statechart diagrams.34
Figure A.10 – Example of UML state chart diagram .35
Figure A.11 – UML use case syntax.35
Figure A.12 – UML sequence diagram .36
Table 1 – Overview of related standards .27
---------------------- Page: 9 ----------------------
SIST EN 62453-1:2010
– 4 – 62453-1 © IEC:2009(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –
Part 1: Overview and guidance
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62453-1 has been prepared by subcommittee 65E: Devices and
integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This part, in conjunction with the other parts of the first edition of the IEC 62453 series
cancels and replaces IEC/PAS 62453-1, IEC/PAS 62453-2, IEC/PAS 62453-3, IEC/PAS
62453-4 and IEC/PAS 62453-5 published in 2006, and constitutes a technical revision.
The text of this standard is based on the following documents:
FDIS Report on voting
65E/123/FDIS 65E/136/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 10 ----------------------
SIST EN 62453-1:2010
62453-1 © IEC:2009(E) – 5 –
A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
---------------------- Page: 11 ----------------------
SIST EN 62453-1:2010
– 6 – 62453-1 © IEC:2009(E)
INTRODUCTION
Enterprise automation requires two main data flows: a “vertical” data flow from enterprise
level down to the field devices including signals and configuration data, and a “horizontal”
communication between field devices operating on the same or different communication
technologies.
With the integration of fieldbusses into control systems, there are a few other tasks which
need to be performed. In addition to fieldbus- and device-specific tools, there is a need to
integrate these tools into higher-level system-wide planning- or engineering tools. In
particular, for use in extensive and heterogeneous control systems, typically in the area of the
process industry, the unambiguous definition of engineering interfaces that are easy to use for
all those involved is of great importance.
Several different manufacturer specific tools have to be used. The data in these tools are
often invisible data islands from the viewpoint of system life-cycle management and plant-
wide automation.
To ensure the consistent management of a plant-wide control and automation technology, it is
necessary to fully integrate fieldbusses, devices and sub-systems as a seamless part of a
wide range of automation tasks covering the whole automation life-cycle.
IEC 62453 provides an interface specification for developers of FDT (Field Device Tool)
components to support function control and data access within a client/server architecture.
The availability of this standard interface facilitates development of servers and clients by
multiple manufacturers and supports open interoperation.
A device or module-specific software component, called a DTM (Device Type Manager) is
supplied by a manufacturer with the related device type or software entity type. Each DTM
can be integrated into engineering tools via defined FDT interfaces. This approach to
integration is in general open for all fieldbusses and thus supports integration of different
devices and software modules into heterogeneous control systems.
The IEC 62453 common application interface supports the interests of application developers,
system integrators, and manufacturers of field devices and network components. It also
simplifies procurement, reduces system costs and helps manage the lifecycle. Significant
savings are available in operating, engineering and maintaining the control systems.
The objectives of IEC 62453 series are to support:
• universal plant-wide tools for life-cycle management of heterogeneous fieldbus
environments, multi-manufacturer devices, function blocks and modular sub-systems for
all automation domains (e.g. process automation, factory automation and similar
monitoring and control applications);
• integrated and consistent life-cycle data exchange within a control system including its
fieldbuses, devices, function blocks and modular sub-systems;
• simple and powerful manufacturer-independent integration of different automation devices,
function blocks and modular sub-systems into the life-cycle management tools of a control
system.
The FDT concept supports planning and integration of monitoring and control applications, it
does not provide a solution for other engineering tasks such as "electrical wiring planning”,
“mechanical planning”. Plant management subjects such as "maintenance planning”, “control
optimization”, “data archiving”, are not part of this FDT standard. Some of these aspects may
be included in future editions of FDT publications.
---------------------- Page: 12 ----------------------
SIST EN 62453-1:2010
62453-1 © IEC:2009(E) – 7 –
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –
Part 1: Overview and guidance
1 Scope
This part of IEC 62453 presents an overview and guidance for the IEC 62453 series. It
• explains the structure and content of the IEC 62453 series (see Clause 5);
• provides explanations of some aspects of the IEC 62453 series that are common to many
of the parts of the series;
• describes the relationship to some other standards.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61158 (all parts), Industrial communication networks – Fieldbus specifications
IEC 61784 (all parts), Industrial communication networks – Profiles
ISO/IEC 19501:2005, Information technology – Open Distributed Processing – Unified
Modeling Language (UML) Version 1.4.2
3 Terms, definitions, symbols, abbreviations and conventions
For the purposes of this document the following terms, definitions and abbreviations apply.
3.1 Terms and definitions
3.1.1
actor
coherent set of roles that users of use cases play when interacting with these use cases
[ISO/IEC 19501]
NOTE An actor has one role for each use case with which it communicates.
3.1.2
address
communication protocol specific access identifier
3.1.3
application
software functional unit that is specific to the solution of a problem in industrial-process
measurement and control
NOTE An application may be distributed among resources, and may communicate with other applications.
---------------------- Page: 13 ----------------------
SIST EN 62453-1:2010
– 8 – 62453-1 © IEC:2009(E)
3.1.4
business object
object representing specific behavior (e.g. DTM, BTM and channel)
NOTE The term business object has been defined originally as part of the design pattern 3-tier architecture,
where the business object is part of the business layer.
3.1.5
Block Type Manager (BTM)
specialized DTM to manage and handle a block
3.1.6
communication
fieldbus protocol specific data transfer
3.1.7
Communication Channel
access point for communication to field device
3.1.8
configuration
system created by configuring the plant components and the topology
3.1.9
configure
(see also parameterize)
setting parameters at the instance data as well as the logical association of plant components
to build up the plant topology (off-line)
3.1.10
connection
established data path for communication with an selected device
3.1.11
data
set of parameter values
3.1.12
data type
set of values together with a set of permitted operations
[ISO 2382 series]
3.1.13
DCS manufacturer / system manufacturer
manufacturer of the engineering system
3.1.14
device
(see also field device)
a) networked independent physical entity of an industrial automation system capable of
performing specified functions in a particular context and delimited by its interfaces
[IEC 61499-1]
b) entity that performs control, actuating and/or sensing functions and interfaces to other
such entities within an automation system
---------------------- Page: 14 ----------------------
SIST EN 62453-1:2010
62453-1 © IEC:2009(E) – 9 –
3.1.15
device manufacturer
manufacturer of fieldbus devices
3.1.16
device type
device characterization based on abstract properties such as manufacturer, fieldbus protocol,
device type identifier, device classification, version information or other information
NOTE The scope of such characterizations can vary depending on the properties that are used in the definition of
such a set and is manufacturer specific for each DTM.
3.1.17
distributed system
FDT objects that jointly are executed on different PCs in a network
NOTE The implementation of such a distributed system is vendor specific (for example: DTM and Presentation
are executed on different PCs or DTMs are executed in multi-user system on different PCs)
3.1.18
documentation
human readable information about a device instance
NOTE This may be electronic information in a database.
3.1.19
Device Type Manager (DTM)
a) software component containing device specific application software
b) generic class and means "Type Manager"
NOTE The D is kept because the Acronym is well-known in the market.
3.1.20
DTM device type
software module for a particular device type within the DTM
NOTE A DTM may contain one or more DTM device types
3.1.21
entity
particular thing, such as a person, place, process, object, concept, association, or event
[IEC 61499-1]
3.1.22
field device
(see also device)
3.1.23
Frame Application
FDT runtime environment
3.1.24
FDT model
interface specification for objects and object behavior in a monitoring and control system
3.1.25
function
specific purpose of an entity or its characteristic action
[IEC 61499-1]
---------------------- Page: 15 ----------------------
SIST EN 62453-1:2010
– 10 – 62453-1 © IEC:2009(E)
3.1.26
hardware
physical equipment, as opposed to programs, procedures, rules and associated
documentation
[ISO/AFNOR Dictionary of computer science]
3.1.27
implementation
development phase in which the hardware and software of a system become operational
[IEC 61499-1]
3.1.28
instantiation
creation of an instance of a specified type
[IEC 61499-1]
3.1.29
interface
shared boundary between two functional units, defined by functio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.