kSIST FprEN IEC 61557-13:2023

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems

IEC 61557-13:2023 defines special performance requirements for hand-held and hand manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems up to 1 000 V AC and 1 500 V DC taking into account the influence of high external low-frequency magnetic fields and other influencing quantities. See Annex A for examples of measurement applications.
This document does not apply to current clamps or sensors that are used in combination with devices for insulation fault location in accordance with IEC 61557-9, unless it is specified by the manufacturer.
IEC 61557-13:2023 cancels and replaces the first edition published in 2011. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the term "fixing device" has been removed;
b) the measuring range was changed to a display range, the indication of DC or peak values has been added in 4.1;
c) the frequency for the test of sensitivity for low-frequency magnetic fields has been defined in 4.2;
d) the specified measuring range is now defined as the range of indicated values based on the operating uncertainty in 4.3;
e) alignment of the structure with that of the whole IEC 61557 series;
f) the variation E12 (maximum load current), may be specified according to the manufacturer’s specification.

Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V – Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen – Teil 13: Handgehaltene und handbediente Strommesszangen und Stromsonden zur Messung von Ableitströmen in elektrischen Anlagen

Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection - Partie 13: Pinces et capteurs de courant portatifs et manipulés à la main pour la mesure des courants de fuite dans les réseaux de distribution électriques

L'IEC 61557-13:2023 définit les exigences spécifiques de qualités de fonctionnement relatives aux pinces et capteurs de courant portatifs et manipulés à la main, en vue de la mesure des courants de fuite dans les réseaux de distribution électriques jusqu'à 1 000 V en courant alternatif et 1 500 V en courant continu en prenant en compte l’influence des champs magnétiques externes à basse fréquence élevés et autres grandeurs d’influence. Voir l'Annexe A pour des exemples d'applications de mesure.
Le présent document ne s'applique pas aux pinces et capteurs de courant utilisés en association avec des dispositifs prévus pour la localisation des défauts d'isolement conformes à l'IEC 61557‑9, sauf spécification de la part du fabricant à ce sujet.
L'IEC 61557-13:2023 annule et remplace la première édition publiée en 2011. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le terme "dispositif de fixation" a été supprimé;
b) la plage de mesure a été remplacée par une plage d'affichage, et l'indication des valeurs de courant continu ou des valeurs de crête a été ajoutée au 4.1;
c) la fréquence de l'essai de sensibilité aux champs magnétiques à basse fréquence a été définie au 4.2;
d) la plage de mesure spécifiée est désormais définie comme la plage des valeurs indiquées fondées sur l'incertitude de fonctionnement au 4.3;
e) alignement de la structure sur celle de toute la série IEC 61557;
f) la variation E12 (courant de charge maximal) peut être spécifiée selon la spécification du fabricant.

Električna varnost v nizkonapetostnih razdelilnih sistemih izmenične napetosti do 1 kV in enosmerne napetosti do 1,5 kV - Oprema za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov - 13. del: Ročne in ročno upravljane tokovne klešče in senzorji za merjenje uhajavih tokov v električnih razdelilnih sistemih

General Information

• Status: Not Published
• Public Enquiry End Date: 18-Sep-2022
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• ICS: 29.080.01 - Electrical insulation in general
• ICS: 29.240.01 - Power transmission and distribution networks in general
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 24-May-2023
• Due Date: 12-Jul-2023
• Completion Date: 04-Jul-2023
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: FprEN IEC 61557-13:2023 - Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems

Relations

• Revised: SIST EN 61557-13:2011 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems (IEC 61557-13:2011)
• Effective Date: 06-Jul-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 61557-13:2022
01-september-2022
Električna varnost v nizkonapetostnih razdelilnih sistemih izmenične napetosti do
1 kV in enosmerne napetosti do 1,5 kV - Oprema za preskušanje, merjenje ali
nadzorovanje zaščitnih ukrepov - 13. del: Ročne in ročno upravljane tokovne
klešče in senzorji za merjenje uhajavih tokov v električnih razdelilnih sistemih
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-
held and hand-manipulated current clamps and sensors for measurement of leakage
currents in electrical distribution systems
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V –
Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen – Teil 13:
Handgehaltene und handbediente Strommesszangen und Stromsonden zur Messung
von Ableitströmen in elektrischen Anlagen
Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1
500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de
protection - Partie 13: Pinces et capteurs de courant portatifs et manipulés à la main
pour la mesure des courants de fuite dans les réseaux de distribution électriques
Ta slovenski standard je istoveten z: prEN IEC 61557-13:2022
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
29.080.01 Električna izolacija na Electrical insulation in
splošno general
oSIST prEN IEC 61557-13:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61557-13:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61557-13:2022
85/834/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61557-13 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-07-01 2022-09-23
SUPERSEDES DOCUMENTS:
85/788/CD, 85/805A/CC

IEC TC 85 : MEASURING EQUIPMENT FOR ELECTRICAL AND ELECTROMAGNETIC QUANTITIES
SECRETARIAT: SECRETARY:
China Ms Guiju HAN
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

SC 62A,TC 66
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held
and hand-manipulated current clamps and sensors for measurement of leakage currents in
electrical distribution systems

PROPOSED STABILITY DATE: 2028

NOTE FROM TC/SC OFFICERS:

1
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61557-13:2022
IEC CDV 61557-13 © IEC:2022 - 2 - 85/834/CDV
2 CONTENTS
3 FOREWORD . - 3 -
4 INTRODUCTION . - 5 -
5 1 Scope . - 6 -
6 2 Normative references . - 6 -
7 3 Terms and definitions . - 6 -
8 4 Requirements . - 8 -
9 4.1 General requirements . - 8 -
10 4.2 Operating classes .
...