SIST EN 3364:2023
(Main)Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm
Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted, softened - Forging stocks - a or D ≤ 300 mm
This document specifies the requirements relating to:
Steel X5CrNiCu15-5 (1.4545)
Consumable electrode remelted, softened
Forging stocks
a or D ≤ 300 mm
for aerospace applications.
Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode umgeschmolzen, weichgeglüht - Schmiedevormaterial - a oder D ≤ 300 mm
Dieses Dokument legt die Anforderungen an:
Stahl X5CrNiCu15-5 (1.4545)
Mit selbstverzehrender Elektrode umgeschmolzen, weichgeglüht
Schmiedevormaterial
a oder D ≤ 300 mm
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable, adouci - Produits destinés à la forge - a ou D ≤ 300 mm
Le présent document spécifie les exigences relatives à :
Acier X5CrNiCu15-5 (1.4545)
Refondu à l'électrode consommable, adouci
Produits destinés à la forge
a ou D ≤ 300 mm
pour les applications aérospatiales.
Aeronavtika - Jeklo X5CrNiCu15-5 (1.4545) - Pretaljeno s taljivo elektrodo, mehčano - Materiali za kovanje - a ali D ≤ 300 mm
Ta dokument določa zahteve, ki se navezujejo na:
jeklo X5CrNiCu15-5 (1.4545),
pretaljeno s taljivo elektrodo in mehčano,
materiale za kovanje,
a ali D ≤ 300 mm,
za uporabo v aeronavtiki.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3364:2023
01-marec-2023
Nadomešča:
SIST EN 3364:2009
Aeronavtika - Jeklo X5CrNiCu15-5 (1.4545) - Pretaljeno s taljivo elektrodo,
mehčano - Materiali za kovanje - a ali D ≤ 300 mm
Aerospace series - Steel X5CrNiCu15-5 (1.4545) - Consumable electrode remelted,
softened - Forging stocks - a or D ≤ 300 mm
Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen, weichgeglüht - Schmiedevormaterial - a oder D ≤ 300 mm
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Refondu à l'électrode consommable,
adouci - Produits destinés à la forge - a ou D ≤ 300 mm
Ta slovenski standard je istoveten z: EN 3364:2022
ICS:
49.025.10 Jekla Steels
SIST EN 3364:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3364:2023
---------------------- Page: 2 ----------------------
SIST EN 3364:2023
EN 3364
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 3364:2007
English Version
Aerospace series - Steel X5CrNiCu15-5 (1.4545) -
Consumable electrode remelted, softened - Forging stocks
- a or D 300 mm
Série aérospatiale - Acier X5CrNiCu15-5 (1.4545) - Luft- und Raumfahrt - Stahl X5CrNiCu15-5 (1.4545) -
Refondu à l'électrode consommable, adouci - Produits Mit selbstverzehrender Elektrode umgeschmolzen,
destinés à la forge - a ou D 300 mm weichgeglüht - Schmiedevormaterial - a oder D 300
mm
This European Standard was approved by CEN on 2 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3364:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3364:2023
EN 3364:2022 (E)
Contents Page
European Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 3364:2023
EN 3364:2022 (E)
European Foreword
This document (EN 3364:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall
be withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3364:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa
...
SLOVENSKI STANDARD
oSIST prEN 3364:2021
01-november-2021
Aeronavtika - Jeklo X5CrNiCu15 5 (1.4545) - Pretaljeno s taljivo elektrodo,
mehčano - Materiali za kovanje - a ali D ≤ 300 mm
Aerospace series - Steel X5CrNiCu15 5 (1.4545) - Consumable electrode remelted,
softened - Forging stocks - a or D ≤ 300 mm
Luft- und Raumfahrt - Stahl X5CrNiCu15 5 (1.4545) - Mit selbstverzehrender Elektrode
umgeschmolzen, geglüht - Schmiedevormaterial - a oder D ≤ 300 mm
Série aérospatiale - Acier X5CrNiCu15 5 (1.4545) - Refondu à l'électrode consommable,
adouci - Produits destinés à la forge - a ou D ≤ 300 mm
Ta slovenski standard je istoveten z: prEN 3364
ICS:
49.025.10 Jekla Steels
oSIST prEN 3364:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 3364:2021
---------------------- Page: 2 ----------------------
oSIST prEN 3364:2021
DRAFT
EUROPEAN STANDARD
prEN 3364
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 49.025.10 Will supersede EN 3364:2007
English Version
Aerospace series - Steel X5CrNiCu15 5 (1.4545) -
Consumable electrode remelted, softened - Forging stocks
- a or D ≤ 300 mm
Série aérospatiale - Acier X5CrNiCu15 5 (1.4545) - Luft- und Raumfahrt - Stahl X5CrNiCu15 5 (1.4545) -
Refondu à l'électrode consommable, adouci - Produits Mit selbstverzehrender Elektrode umgeschmolzen,
destinés à la forge - a ou D ≤ 300 mm geglüht - Schmiedevormaterial - a oder D ≤ 300 mm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3364:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 3364:2021
prEN 3364:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 3364:2021
prEN 3364:2021 (E)
European foreword
This document (prEN 3364:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3364:2007.
3
---------------------- Page: 5 ----------------------
oSIS
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.