SIST ISO 5599-2:2002/AMD 1:2005

Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector - Amendment 1

This part of ISO 5599 specifies the requirements for a mounting interface surface with optional electrical connector for five-port pneumatic directional control valves, for use at a maximum rated pressure of [ 1)]. It gives
— dimensions and tolerances of the interface features,
— port identification,
— identification of the result of control-mechanism actuation, and
— dimensions, tolerances and specifications for optional interface electrical connector mating.
It is not applicable to the functional characteristics of interfaces.

Transmissions pneumatiques — Distributeurs à cinq orifices principaux — Partie 2: Plans de pose avec connecteur électrique facultatif — Amendement 1

Fluidna tehnika – Pnevmatika – Petpotni ventili – 2. del: Priključne površine z električnimi priključki – Dopolnilo 1

Ta del standarda ISO 5599 določa zahteve za priključno površino z električnim priključkom za petpotne pnevmatske ventile za uporabo pri največjem nazivnem tlaku [ 1)]. Vsebuje
– dimenzije in odstopanja za lastnosti vmesnika,
– opredelitev vhodov,
– opredelitev rezultata proženja nadzornega mehanizma ter
– dimenzije, odstopanja in specifikacije za stikanje električnega priključka.
Ne uporablja se za funkcijske značilnosti vmesnikov.

General Information

• Status: Published
• Publication Date: 31-Oct-2005
• ICS: 23.100.50 - Control components
• Technical Committee: IHPV - Hydraulics and pneumatics
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2005
• Due Date: 01-Nov-2005
• Completion Date: 01-Nov-2005
• Ref Project: ISO 5599-2:2001/Amd 1:2004 - Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector — Amendment 1

Relations

• Amends: SIST ISO 5599-2:2002 - Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector
• Effective Date: 01-Nov-2005
• Child: ISO 5599-2:2001 - Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector
• Effective Date: 12-May-2008
• Child: SIST ISO 5599-2:2002 - Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector
• Effective Date: 12-May-2008
• Amends: SIST ISO 5599-2:2002 - Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surfaces with optional electrical connector
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 5599-2
Second edition
2001-09-01
AMENDMENT 1
2004-08-15
Pneumatic fluid power — Five-port
directional control valves —
Part 2:
Mounting interface surfaces with optional
electrical connector
AMENDMENT 1
Transmissions pneumatiques — Distributeurs à cinq orifices
principaux —
Partie 2: Plans de pose avec connecteur électrique facultatif
AMENDEMENT 1




Reference number
ISO 5599-2:2001/Amd.1:2004(E)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 5599-2:2001/Amd.1:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2004 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 5599-2:2001/Amd.1:2004(E)
...

NORME ISO
INTERNATIONALE 5599-2
Deuxième édition
2001-09-01
AMENDEMENT 1
2004-08-15

Transmissions pneumatiques —
Distributeurs à cinq orifices principaux —
Partie 2:
Plans de pose avec connecteur électrique
facultatif
AMENDEMENT 1
Pneumatic fluid power — Five-port directional control valves —
Part 2: Mounting interface surfaces with optional electrical connector
AMENDMENT 1




Numéro de référence
ISO 5599-2:2001/Amd.1:2004(F)
©
ISO 2004

---------------------- Page: 1 ----------------------
ISO 5599-2:2001/Amd.1:2004(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


©  ISO 2004
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Publié en Suisse

ii © ISO 2004 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 55
...

SLOVENSKI STANDARD
SIST ISO 5599-2:2002/AMD 1:2005
01-november-2005
)OXLGQDWHKQLND±3QHYPDWLND±3HWSRWQLYHQWLOL±GHO3ULNOMXþQHSRYUãLQH]
HOHNWULþQLPLSULNOMXþNL±'RSROQLOR
Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface
surfaces with optional electrical connector - Amendment 1
Ta slovenski standard je istoveten z: ISO 5599-2:2001/Amd 1:2004
ICS:
23.100.50 Krmilni sestavni deli Control components
SIST ISO 5599-2:2002/AMD 1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 5599-2:2002/AMD 1:2005

---------------------- Page: 2 ----------------------

SIST ISO 5599-2:2002/AMD 1:2005


INTERNATIONAL ISO
STANDARD 5599-2
Second edition
2001-09-01
AMENDMENT 1
2004-08-15
Pneumatic fluid power — Five-port
directional control valves —
Part 2:
Mounting interface surfaces with optional
electrical connector
AMENDMENT 1
Transmissions pneumatiques — Distributeurs à cinq orifices
principaux —
Partie 2: Plans de pose avec connecteur électrique facultatif
AMENDEMENT 1




Reference number
ISO 5599-2:2001/Amd.1:2004(E)
©
ISO 2004

---------------------- Page: 3 ----------------------

SIST ISO 5599-2:2002/AMD 1:2005
ISO 5599-2:2001/Amd.1:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission
...