SIST EN 61869-6:2017

Instruments transformers - Part 6: Additional general requirements for Low Power Instrument Transformers (IEC 61869-6:2016)

This part of IEC 61869 is a product family standard and covers only additional general
requirements for low-power instrument transformers (LPIT) used for a.c. applications having
rated frequencies from 15 Hz to 100 Hz covering MV, HV and EHV or used for d.c.
applications. This product standard is based on IEC 61869-1:2007, in addition to the relevant
product specific standard.
This part of IEC 61869 does not cover the specification for the digital output format of
instrument transformers.
This part of IEC 61869 defines the errors in case of analogue or digital output. The other
characteristics of the digital interface for instrument transformers are standardised in
IEC 61869-9 as an application of the standards, the IEC 61850 series, which details layered
substation communication architecture.
This part of IEC 61869 considers additional requirements concerning bandwidth. The
accuracy requirements on harmonics and requirements for the anti-aliasing filter are given in
the normative Annex 6A.4.
The general block diagram of single-phase LPITs is given in Figure 601.
According to the technology, it is not absolutely necessary that all parts described in
Figure 601 are included in the instrument transformer.
As an example, for low-power passive transformers (LPITs without active electronic
components) the blocks are composed only with passive components and there is no power
supply.

Messwandler - Teil 6: Zusätzliche allgemeine Anforderungen für Kleinsignal-Messwandler

Transformateurs de mesure - Partie 6: Exigences générales supplémentaires concernant les transformateurs de mesure de faible puissance

La présente Partie de l'IEC 61869 est une norme de familles de produits et couvre uniquement les exigences générales supplémentaires concernant les transformateurs de mesure de faible puissance (LPIT) utilisés pour les applications en courant alternatif présentant des fréquences assignées comprises entre 15 Hz et 100 Hz couvrant les applications moyenne tension (MT), haute tension (HT) et très haute tension (THT) ou utilisés pour les applications en courant continu. La présente norme de produit s'appuie sur l'IEC 61869-1:2007, en plus de la norme correspondante spécifique au produit.
La présente partie de l'IEC 61869 ne couvre pas la spécification du format de sortie numérique des transformateurs de mesure.
La présente partie de l'IEC 61869 définit les erreurs pour les sorties analogiques et numériques. Les autres caractéristiques de l'interface numérique des transformateurs de mesure sont normalisées dans l'IEC 61869-9 en tant qu'application des normes de la série IEC 61850, qui décrit en détail une architecture de communication en couches applicable aux postes électriques.
La présente partie de l'IEC 61869 tient compte des exigences supplémentaires relatives à la largeur de bande.
Cette première édition de l'IEC 61869-6 annule et remplace les parties correspondantes de l'IEC 60044-7, parue en 1999, et de l'IEC 60044-8, parue en 2002.
La présente Partie 6 doit être utilisée conjointement avec l'IEC 61869-1:2007

Instrumentni transformatorji - 6. del: Dodatne splošne zahteve za instrumentne transformatorje majhnih moči (IEC 61869-6:2016)

Ta del standarda IEC 61869 je standard za skupino proizvodov in zajema samo dodatne splošne zahteve za merilne transformatorje majhnih moči (LPIT) za uporabo z izmeničnim tokom z nazivnimi frekvencami 15–100 Hz, ki zajemajo MV, HV in EHV, ali za uporabo z
enosmernim tokom. Ta standard za proizvode temelji na ustreznem standardu za posamezen proizvod ter na standardu IEC 61869-1:2007.
Ta del standarda IEC 61869 ne obravnava specifikacij za digitalno obliko zapisa merilnih transformatorjev.
Ta del standarda IEC 61869 določa napake v primeru analognega ali digitalnega zapisa. Druge lastnosti digitalnega vmesnika za merilne transformatorje so standardizirane v standardu IEC 61869-9 kot uporaba skupine standardov IEC 61850, ki podrobno opisujejo večplastno komunikacijsko arhitekturo podpostaj.
Ta del standarda IEC 61869 obravnava dodatne zahteve glede pasovne širine. Zahteve glede natančnosti pri harmonskih nihanjih in zahteve za filtre za odpravljanje potujevanja frekvenc so podane v normativnem dodatku 6A.4.
Splošni blokovni diagram enofaznih merilnih transformatorjev majhnih moči je podan na sliki 601.
Glede na tehnologijo ni povsem nujno, da so vsi deli, opisani na sliki 601, vključeni v merilnem transformatorju.
Tako so na primer pri pasivnih transformatorjih majhnih moči (transformatorji brez aktivnih elektronskih komponent) bloki sestavljeni samo iz pasivnih komponent brez napajanja.

General Information

• Status: Published
• Publication Date: 08-Jan-2017
• ICS: 17.220.20 - Measurement of electrical and magnetic quantities
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Jan-2017
• Due Date: 11-Mar-2017
• Completion Date: 09-Jan-2017
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Ref Project: EN 61869-6:2016 - Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers

Relations

• Replaces: SIST EN 60044-7:2000 - Instrument transformers -- Part 7: Electronic voltage transformers
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60044-8:2003 - Instrument transformers -- Part 8: Electronic current transformers
• Effective Date: 28-Jan-2023
• Revised: SIST EN IEC 61869-1:2024 - Instrument transformers - Part 1: General requirements (IEC 61869-1:2023)
• Effective Date: 07-Nov-2023
• Revised: SIST EN 60044-8:2003 - Instrument transformers -- Part 8: Electronic current transformers
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2017
Nadomešča:
SIST EN 60044-7:2000
SIST EN 60044-8:2003
Instrumentni transformatorji - 6. del: Dodatne splošne zahteve za instrumentne
transformatorje majhnih moči (IEC 61869-6:2016)
Instruments transformers - Part 6: Additional general requirements for Low Power
Instrument Transformers (IEC 61869-6:2016)
Ta slovenski standard je istoveten z: EN 61869-6:2016
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61869-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2016
ICS 17.220.20 Supersedes EN 60044-7:2000 (partially),
EN 60044-8:2002 (partially)
English Version
Instrument transformers - Part 6: Additional general
requirements for low-power instrument transformers
(IEC 61869-6:2016)
Transformateurs de mesure - Partie 6: Exigences générales Messwandler - Teil 6: Zusätzliche allgemeine
supplémentaires concernant les transformateurs de mesure Anforderungen für Kleinsignal-Messwandler
de faible puissance (IEC 61869-6:2016)
(IEC 61869-6:2016)
This European Standard was approved by CENELEC on 2016-06-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61869-6:2016 E
European foreword
The text of document 38/501/FDIS, future edition 1 of IEC 61869-6, prepared by IEC/TC 38
"Instrument transformers" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61869-6:2016.
The following dates are fixed:
(dop) 2017-06-23
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-12-23
standards conflicting with the
document have to be withdrawn
This document is to be read jointly with, and is based on, EN 61869-1:2009, General requirements,
However, the reader is encouraged to use the most recent edition of that document.

This document follows the structure of EN 61869 series and supplements or modifies the
corresponding clauses in EN 61869-1 Standard.

When a particular clause/subclause of Part 1, is not mentioned in this Part 6, that clause/subclause
applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.

For additional clauses, subclauses, figures, tables, annexes or notes, the following numbering system
is used:
– clauses, subclauses, tables, figures and notes that are numbered starting from 601 are additional to
those in Part 1;
– additional annexes are lettered 6A, 6B, etc.

This document, jointly with EN 61869-1:2009, supersedes EN 60044-7:2000 (partially) and
EN 60044-8:2002 (partially).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61869-6:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60044-7:1999 NOTE Harmonized as EN 60044-7:2000 (not modified).
IEC 60044-8:2002 NOTE Harmonized as EN 60044-8:2002 (not modified)
IEC 61508-1 NOTE Harmonized as EN 61508-1.
IEC 61508-3 NOTE Harmonized as EN 61508-3.
IEC 61850 Series NOTE Harmonized as EN 61850 Series.
IEC 61869 Series NOTE Harmonized as EN 61869 Series.
IEC 61869-5 NOTE Harmonized as EN 61869-5.
IEC 61869-9 NOTE Harmonized as EN 61869-9.
IEC 61869-10 NOTE Harmonized as EN 61869-10.
IEC 61869-11 NOTE Harmonized as EN 61869-11.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Annex ZA of EN 61869:2009 is applicable with the following additions:

Publication Year Title EN/HD Year

- - Voltage characteristics of electricity EN 50160 2010
supplied by public electricity networks
IEC 60068-2-6 2007 Environmental testing - EN 60068-2-6 2008
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60255-27 2013 Measuring relays and protection equipment EN 60255-27 2014
- Part 27: Product safety requirements
IEC 60603-7-1 2011 Connectors for electronic equipment - EN 60603-7-1 2011
Part 7-1: Detail specification for 8-way,
shielded, free and fixed connectors
IEC 60794-2 2002 Optical fibre cables - EN 60794-2 2003
Part 2: Indoor cables - Sectional
specification
IEC 60794-3 2014 Optical fibre cables - EN 60794-3 2015
Part 3: Outdoor cables - Sectional
specification
IEC 60812 2006 Analysis techniques for system reliability - EN 60812 2006
Procedure for failure mode and effects
analysis (FMEA)
1) 2)
IEC 61000-4-1 2006 Electromagnetic compatibility (EMC) - EN 61000-4-1 2007
Part 4-1: Testing and measurement
techniques - Overview of IEC 61000-4
series
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - EN 61000-4-2 2009
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - EN 61000-4-3 2006
Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
+A1 2007  +A1 2008
+A2 2010  +A2 2010
1)
Superseded by IEC/TR 61000-4-1:2016.
2)
Withdrawn publication.
Publication Year Title EN/HD Year

IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - EN 61000-4-4 2012
Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) - EN 61000-4-5 2014
Part 4-5: Testing and measurement
techniques - Surge immunity test
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - EN 61000-4-6 2014
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
IEC 61000-4-7 2002 Electromagnetic compatibility (EMC) - EN 61000-4-7 2002
Part 4-7: Testing and measurement
techniques - General guide on harmonics
and interharmonics measurements and
instrumentation, for power supply systems
and equipment connected thereto
+A1 2008  +A1 2009
IEC 61000-4-8 2009 Electromagnetic compatibility (EMC) - EN 61000-4-8 2010
Part 4-8: Testing and measurement
techniques - Power frequency magnetic
field immunity test
3)
IEC 61000-4-9 1993 Electromagnetic compatibility (EMC) - EN 61000-4-9 1993
Part 4-9: Testing and measurement
techniques - Pulse magnetic field immunity
test
3)
+A1 2000  +A1 2001
4)
IEC 61000-4-10 1993 Electromagnetic compatibility (EMC) - EN 61000-4-10 1993
Part 4-10: Testing and measurement
techniques - Damped oscillatory magnetic
field immunity test
+A1 2000  +A1 2001
IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - EN 61000-4-11 2004
Part 4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 61000-4-13 2002 Electromagnetic compatibility (EMC) - EN 61000-4-13 2002
Part 4-13: Testing and measurement
techniques - Harmonics and
interharmonics including mains signaling at
a.c. power port, low frequency immunity
tests
+A1 2009  +A1 2009
3)
Superseded by EN 61000-4-9:2016 (IEC 61000-4-9:2016): DOW = 2019-08-17.
4)
Superseded by IEC 61000-4-10:2016.
Publication Year Title EN/HD Year

5)
IEC 61000-4-16 1998 Electromagnetic compatibility (EMC) - EN 61000-4-16 1998
Part 4-16: Testing and measurement
techniques - Test for immunity to
conducted, common mode disturbances in
the frequency range 0 Hz to 150 kHz
+A1 2001  +A1 2004
+A2 2009  +A2 2011
IEC 61000-4-18 2006 Electromagnetic compatibility (EMC) - EN 61000-4-18 2007
Part 4-18: Testing and measurement + corr. September 2007
techniques - Damped oscillatory wave
immunity test
+A1 2010  +A1 2010
IEC 61000-4-29 2000 Electromagnetic compatibility (EMC) - EN 61000-4-29 2000
Part 4-29: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations on d.c.
input power port immunity tests
IEC 61025 2006 Fault Tree Analysis (FTA) EN 61025 2007
IEC 61076-2-101 2012 Connectors for electronic equipment - EN 61076-2-101 2012
Product requirements -
Part 2-101: Circular connectors - Detail
specification for M12 connectors with
screw-locking
IEC/TS 61850-2 2003 Communication networks and systems in - -
substations -
Part 2: Glossary
IEC 61850-7-4 2010 Communication networks and systems for EN 61850-7-4 2010
power utility automation -
Part 7-4: Basic communication structure -
Compatible logical node classes and data
object classes
IEC 61869-1 (mod) 2007 Instrument transformers - EN 61869-1 2009
Part 1: General requirements
IEC 61869-2 2012 Instrument transformers - EN 61869-2 2012
Part 2: Additional requirements for current
transformers
IEC 61869-3 2011 Instrument transformers - EN 61869-3 2011
Part 3: Additional requirements for
inductive voltage transformers
IEC/TR 61869-103 2012 Instrument transformers - The use of - -
instrument transformers for power quality
measurement
IEC 62271-100 2008 High-voltage switchgear and controlgear - EN 62271-100 2009
Part 100: Alternating current circuit-
breakers
+A1 2012  +A1 2012
CISPR 11 (mod) 2015 Industrial, scientific and medical equipment EN 55011 2016
- Radio-frequency disturbance
characteristics - Limits and methods of
measurement
5)
Superseded by EN 61000-4-16:2016 (IEC 61000-4-16:2015): DOW = 2019-01-13.
Publication Year Title EN/HD Year

ISO/IEC/IEEE 2010 Information technology - Smart transducer - -
21451-4 interface for sensors and actuators -
Part 4: Mixed-mode communication
protocols and Transducer Electronic Data
Sheet (TEDS) formats
IEC 61869-6 ®
Edition 1.0 2016-04
INTERNATIONAL
STANDARD
colour
inside
Instrument transformers –
Part 6: Additional general requirements for low-power instrument transformers

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 17.220.20 ISBN 978-2-8322-3330-6

– 2 – IEC 61869-6:2016  IEC 2016
CONTENTS
FOREWORD. 6
1 Scope . 10
2 Normative reference . 10
3 Terms and definitions . 13
3.1 General terms and definitions . 13
3.2 Terms and definitions related to dielectric ratings and voltages . 17
3.3 Terms and definitions related to current ratings . 17
3.4 Terms and definitions related to accuracy . 21
3.5 Terms and definitions related to other ratings . 26
3.7 Index of abbreviations and symbols . 26
4 Normal and special service conditions . 28
4.2 Normal service conditions .
...

SLOVENSKI STANDARD
01-februar-2017
1DGRPHãþD
SIST EN 60044-7:2000
SIST EN 60044-8:2003
0HULOQLWUDQVIRUPDWRUMLGHO'RGDWQHVSORãQH]DKWHYH]DPHULOQH
WUDQVIRUPDWRUMHPDMKQLKPRþL,(&
Instruments transformers - Part 6: Additional general requirements for Low Power
Instrument Transformers (IEC 61869-6:2016)
Ta slovenski standard je istoveten z: EN 61869-6:2016
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61869-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2016
ICS 17.220.20 Supersedes EN 60044-7:2000 (partially),
EN 60044-8:2002 (partially)
English Version
Instrument transformers - Part 6: Additional general
requirements for low-power instrument transformers
(IEC 61869-6:2016)
Transformateurs de mesure - Partie 6: Exigences générales Messwandler - Teil 6: Zusätzliche allgemeine
supplémentaires concernant les transformateurs de mesure Anforderungen für Kleinsignal-Messwandler
de faible puissance (IEC 61869-6:2016)
(IEC 61869-6:2016)
This European Standard was approved by CENELEC on 2016-06-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61869-6:2016 E
European foreword
The text of document 38/501/FDIS, future edition 1 of IEC 61869-6, prepared by IEC/TC 38
"Instrument transformers" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61869-6:2016.
The following dates are fixed:
(dop) 2017-06-23
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2019-12-23
standards conflicting with the
document have to be withdrawn
This document is to be read jointly with, and is based on, EN 61869-1:2009, General requirements,
However, the reader is encouraged to use the most recent edition of that document.

This document follows the structure of EN 61869 series and supplements or modifies the
corresponding clauses in EN 61869-1 Standard.

When a particular clause/subclause of Part 1, is not mentioned in this Part 6, that clause/subclause
applies as far as is reasonable. When this standard states “addition”, “modification” or “replacement”,
the relevant text in Part 1 is to be adapted accordingly.

For additional clauses, subclauses, figures, tables, annexes or notes, the following numbering system
is used:
– clauses, subclauses, tables, figures and notes that are numbered starting from 601 are additional to
those in Part 1;
– additional annexes are lettered 6A, 6B, etc.

This document, jointly with EN 61869-1:2009, supersedes EN 60044-7:2000 (partially) and
EN 60044-8:2002 (partially).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61869-6:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60044-7:1999 NOTE Harmonized as EN 60044-7:2000 (not modified).
IEC 60044-8:2002 NOTE Harmonized as EN 60044-8:2002 (not modified)
IEC 61508-1 NOTE Harmonized as EN 61508-1.
IEC 61508-3 NOTE Harmonized as EN 61508-3.
IEC 61850 Series NOTE Harmonized as EN 61850 Series.
IEC 61869 Series NOTE Harmonized as EN 61869 Series.
IEC 61869-5 NOTE Harmonized as EN 61869-5.
IEC 61869-9 NOTE Harmonized as EN 61869-9.
IEC 61869-10 NOTE Harmonized as EN 61869-10.
IEC 61869-11 NOTE Harmonized as EN 61869-11.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Annex ZA of EN 61869:2009 is applicable with the following additions:

Publication Year Title EN/HD Year

- - Voltage characteristics of electricity EN 50160 2010
supplied by public electricity networks
IEC 60068-2-6 2007 Environmental testing - EN 60068-2-6 2008
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
IEC 60255-27 2013 Measuring relays and protection equipment EN 60255-27 2014
- Part 27: Product safety requirements
IEC 60603-7-1 2011 Connectors for electronic equipment - EN 60603-7-1 2011
Part 7-1: Detail specification for 8-way,
shielded, free and fixed connectors
IEC 60794-2 2002 Optical fibre cables - EN 60794-2 2003
Part 2: Indoor cables - Sectional
specification
IEC 60794-3 2014 Optical fibre cables - EN 60794-3 2015
Part 3: Outdoor cables - Sectional
specification
IEC 60812 2006 Analysis techniques for system reliability - EN 60812 2006
Procedure for failure mode and effects
analysis (FMEA)
1) 2)
IEC 61000-4-1 2006 Electromagnetic compatibility (EMC) - EN 61000-4-1 2007
Part 4-1: Testing and measurement
techniques - Overview of IEC 61000-4
series
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - EN 61000-4-2 2009
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - EN 61000-4-3 2006
Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
+A1 2007  +A1 2008
+A2 2010  +A2 2010
1)
Superseded by IEC/TR 61000-4-1:2016.
2)
Withdrawn publication.
Publication Year Title EN/HD Year

IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - EN 61000-4-4 2012
Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) - EN 61000-4-5 2014
Part 4-5: Testing and measurement
techniques - Surge immunity test
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - EN 61000-4-6 2014
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
IEC 61000-4-7 2002 Electromagnetic compatibility (EMC) - EN 61000-4-7 2002
Part 4-7: Testing and measurement
techniques - General guide on harmonics
and interharmonics measurements and
instrumentation, for power supply systems
and equipment connected thereto
+A1 2008  +A1 2009
IEC 61000-4-8 2009 Electromagnetic compatibility (EMC) - EN 61000-4-8 2010
Part 4-8: Testing and measurement
techniques - Power frequency magnetic
field immunity test
3)
IEC 61000-4-9 1993 Electromagnetic compatibility (EMC) - EN 61000-4-9 1993
Part 4-9: Testing and measurement
techniques - Pulse magnetic field immunity
test
3)
+A1 2000  +A1 2001
4)
IEC 61000-4-10 1993 Electromagnetic compatibility (EMC) - EN 61000-4-10 1993
Part 4-10: Testing and measurement
techniques - Damped oscillatory magnetic
field immunity test
+A1 2000  +A1 2001
IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - EN 61000-4-11 2004
Part 4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 61000-4-13 2002 Electromagnetic compatibility (EMC) - EN 61000-4-13 2002
Part 4-13: Testing and measurement
techniques - Harmonics and
interharmonics including mains signaling at
a.c. power port, low frequency immunity
tests
+A1 2009  +A1 2009
3)
Superseded by EN 61000-4-9:2016 (IEC 61000-4-9:2016): DOW = 2019-08-17.
4)
Superseded by IEC 61000-4-10:2016.
Publication Year Title EN/HD Year

5)
IEC 61000-4-16 1998 Electromagnetic compatibility (EMC) - EN 61000-4-16 1998
Part 4-16: Testing and measurement
techniques - Test for immunity to
conducted, common mode disturbances in
the frequency range 0 Hz to 150 kHz
+A1 2001  +A1 2004
+A2 2009  +A2 2011
IEC 61000-4-18 2006 Electromagnetic compatibility (EMC) - EN 61000-4-18 2007
Part 4-18: Testing and measurement + corr. September 2007
techniques - Damped oscillatory wave
immunity test
+A1 2010  +A1 2010
IEC 61000-4-29 2000 Electromagnetic compatibility (EMC) - EN 61000-4-29 2000
Part 4-29: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations on d.c.
input power port immunity tests
IEC 61025 2006 Fault Tree Analysis (FTA) EN 61025 2007
IEC 61076-2-101 2012 Connectors for electronic equipment - EN 61076-2-101 2012
Product requirements -
Part 2-101: Circular connectors - Detail
specification for M12 connectors with
screw-locking
IEC/TS 61850-2 2003 Communication networks and systems in - -
substations -
Part 2: Glossary
IEC 61850-7-4 2010 Communication networks and systems for EN 61850-7-4 2010
power utility automation -
Part 7-4: Basic communication structure -
Compatible logical node classes and data
object classes
IEC 61869-1 (mod) 2007 Instrument transformers - EN 61869-1 2009
Part 1: General requirements
IEC 61869-2 2012 Instrument transformers - EN 61869-2 2012
Part 2: Additional requirements for current
transformers
IEC 61869-3 2011 Instrument transformers - EN 61869-3 2011
Part 3: Additional requirements for
inductive voltage transformers
IEC/TR 61869-103 2012 Instrument transformers - The use of - -
instrument transformers for power quality
measurement
IEC 62271-100 2008 High-voltage switchgear and controlgear - EN 62271-100 2009
Part 100: Alternating current circuit-
breakers
+A1 2012  +A1 2012
CISPR 11 (mod) 2015 Industrial, scientific and medical equipment EN 55011 2016
- Radio-frequency disturbance
characteristics - Limits and methods of
measurement
5)
Superseded by EN 61000-4-16:2016 (IEC 61000-4-16:2015): DOW = 2019-01-13.
Publication Year Title EN/HD Year

ISO/IEC/IEEE 2010 Information technology - Smart transducer - -
21451-4 interface for sensors and actuators -
Part 4: Mixed-mode communication
protocols and Transducer Electronic Data
Sheet (TEDS) formats
IEC 61869-6 ®
Edition 1.0 2016-04
INTERNATIONAL
STANDARD
colour
inside
Instrument transformers –
Part 6: Additional general requirements for low-power instrument transformers

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 17.220.20 ISBN 978-2-8322-3330-6

– 2 – IEC 61869-6:2016  IEC 2016
CONTENTS
FOREWORD. 6
1 Scope . 10
2 Normative reference . 10
3 Terms and definitions . 13
3.1 General terms and definitions . 13
3.2 Terms and definitions related to dielectric ratings and voltages . 17
3.3 Terms and definitions related to current ratings . 17
3.4 Terms and definitions related to accuracy . 21
3.5 Terms and definitions related to other ratings . 26
3.7 Index of abbreviations and symbols . 26
4 Normal and special service conditions . 28
4.2 Normal service conditions .
...