SIST EN ISO 16851:2005

Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2004)

This European Standard specifies a test method for determining the net length of an endless (spliced) conveyor belt.
It applies to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement. It is not suitable or valid for light conveyor belts described in EN 873.

Textilfördergurte - Bestimmung der Länge eines endlosen Fördergurtes (ISO 16851:2004)

Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Länge eines endlosen Fördergurtes fest.
Es wird für alle Typen von Fördergurten angewendet mit Ausnahme von Gurten, die eine Verstärkung aus Stahlseilen enthalten und es ist nicht geeignet oder gültig für leichte För-dergurte, die in EN 873 beschrieben sind.

Courroies transporteuses a carcasse textile - Méthode de mesurage de la longeur nette d'une courroie transporteuse sans fin (jonctionnée) (ISO 16851:2004)

La présente norme européenne spécifie une méthode de détermination de la longueur nette des courroies transporteuses sans fin (jonctionnée). Elle est applicable a tous les types de courroies transporteuses a l'exception de celles ayant une carcasse en câble d'acier, et elle n'est pas appropriée dans le cas des courroies transporteuses légeres décrites dans l'EN 873.

Tekstilni trakovi tračnih transporterjev – Postopek določanja dolžine brezkončnih trakov tračnih transporterjev (ISO 16851:2004)

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2005
• Withdrawal Date: 17-Nov-2013
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Nov-2013
• Due Date: 11-Dec-2013
• Completion Date: 18-Nov-2013
• Ref Project: EN ISO 16851:2004 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2004)

Relations

• Replaced By: SIST EN ISO 16851:2013 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2012)
• Effective Date: 01-Dec-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16851:2005
01-marec-2005
7HNVWLOQLWUDNRYLWUDþQLKWUDQVSRUWHUMHY±3RVWRSHNGRORþDQMDGROåLQHEUH]NRQþQLK
WUDNRYWUDþQLKWUDQVSRUWHUMHY,62
Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor
belt (ISO 16851:2004)
Textilfördergurte - Bestimmung der Länge eines endlosen Fördergurtes (ISO
16851:2004)
Courroies transporteuses a carcasse textile - Méthode de mesurage de la longeur nette
d'une courroie transporteuse sans fin (jonctionnée) (ISO 16851:2004)
Ta slovenski standard je istoveten z: EN ISO 16851:2004
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 16851:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16851:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 16851:2005
EUROPEAN STANDARD
EN ISO 16851
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 53.040.20
English version
Textile conveyor belts - Determination of the net length of an
endless (spliced) conveyor belt (ISO 16851:2004)
Courroies transporteuses à carcasse textile - Méthode de Textilfördergurte - Bestimmung der Länge eines endlosen
mesurage de la longeur nette d'une courroie transporteuse Fördergurtes (ISO 16851:2004)
sans fin (jonctionnée) (ISO 16851:2004)
This European Standard was approved by CEN on 9 January 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16851:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16851:2005
EN ISO 16851:2004 (E)
Contents Page
Foreword.3
1 Scope.4
2 Apparatus.4
3 Procedure.4
4 Calculation and expression of results.5
5 Test report.5
Bibliography .6

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16851:2005
EN ISO 16851:2004 (E)
Foreword
This document (EN ISO 16851:2004) has been prepared by Technical Committee CEN/TC 188 “Conveyor
belts”, the secretariat of which is held by BSI, in collaboration wit
...