Abstract

This European Standard deals with the safety of UV radiation water treatment appliances for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances

Status
Not Published
Public Enquiry End Date
29-Nov-2026
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
24-Sep-2026
Due Date
11-Feb-2027

Buy Documents

Draft

oSIST prEN IEC 60335-2-109:2026

English language (21 pages)
Preview
Preview
e-Library read for
×1 day

oSIST prEN IEC 60335-2-109:2026 is a draft European Standard from CENELEC for the safety of UV radiation water treatment appliances for household and similar use. It sets particular requirements for appliances that use UV-C emitters, including marking, instructions, construction, and test methods, for equipment with rated voltage up to 250 V for single-phase appliances and 480 V for other appliances, including DC and battery-operated types. Engineers, test laboratories, certification teams, and buyers can use it to check whether a product belongs in this safety standard and what safety features it must show.

What does oSIST prEN IEC 60335-2-109:2026 specify?

oSIST prEN IEC 60335-2-109:2026 specifies the safety requirements for UV radiation water treatment appliances for household and similar use. It also covers appliances that are not for normal household use but may still present a danger to the public, such as appliances used by laymen in shops, light industry, and farms.

The document follows the IEC 60335 structure with clauses 1 to 32, then annexes and a bibliography. It is based on the text of IEC 60335-2-109:2023 and is meant to be read with the general requirements of Part 1.

The scope excludes pumps, aquarium luminaires, swimming pool luminaires, appliances intended exclusively for professional use, and appliances for special environments such as corrosive or explosive atmospheres. That matters because a product may look similar to a UV water treatment appliance, but still belong to another standard family.

What are the key requirements of oSIST prEN IEC 60335-2-109:2026?

Test basis and classification

Clause 5.101 requires UV radiation water treatment appliances to be tested as motor-operated appliances. In practice, this means the product is checked under the test approach used for appliances with moving or driven parts, even when its main function is water treatment.

Clause 6 requires the appliances to be class I, class II or class III, with extra limits for immersed use and for swimming pools. Clause 6.2 sets ingress-protection expectations such as IPX8 for appliances used in water and at least IPX7 or IPX1 for appliances used above water, depending on how they are installed. This matters because the enclosure rating and electrical class directly affect the design of the housing, earthing, and installation instructions.

Marking and instructions

Clause 7 requires clear warnings about UV-C emitters, including a warning that UV radiation is dangerous for the eyes and skin and that the emitter must not be operated outside the appliance. If the user may replace the emitter, the appliance must be marked accordingly and the instructions must explain safe replacement, cleaning, and precautions.

The markings also have to state minimum and maximum water temperatures, any rated pressure for connection to a pressurized system other than the mains, and the maximum operating depth for appliances used in water. Clause 7.12.1 adds that the installation instructions must require supply through a residual current device (RCD) with a rated residual operating current not exceeding 30 mA. In practice, these requirements tell the installer and user what conditions the appliance is designed for and how to avoid exposure to UV-C radiation or electric shock.

Heating, moisture and abnormal operation

Clause 11 limits temperature rise on accessible surfaces, and Table 101 adds limits for specified external surfaces. The test probe in Figure 101 may be used where surfaces are suitable and accessible. This matters because the appliance must remain touch-safe during normal use.

Clause 15.1.1 gives a two-hour immersion test for IPX8 appliances. Clause 19 adds abnormal-operation tests, including operation without water and fault conditions taken from IEC 60598-1:2020 for ballast-related checks. These tests show whether the appliance stays safe under foreseeable misuse or faults.

Construction and radiation control

Clause 22 contains the core construction rules. UV radiation must not be discharged before, during, or after installation, during operation, maintenance, cleaning, or emitter replacement. The standard allows this to be achieved by mechanical construction or by a switch that de-energizes the UV-C emitter.

Clause 22.103 and 22.104 deal with user replacement of the UV-C emitter. If replacement is allowed, the design must make replacement possible, keep the emitter correctly sealed, and make the appliance inoperable or obviously incomplete if parts are missing or wrongly fitted. If user replacement is not intended, the construction must prevent it.

Clause 22.105 and 22.106 add electrical limits for class II and class III appliances, including insulation and voltage limits when the appliance is immersed. Clause 27.1 adds earthing measures for class I appliances in contact with water. In practice, these clauses drive the choice of insulation system, seals, earthing path, and servicing concept.

Cords, connections and radiation by-products

Clause 25 limits certain cord and attachment arrangements, including a restriction on type X attachment for IPX7 or IPX8 appliances and a cord requirement for outdoor use. Clause 32.101 addresses ozone produced by indoor appliances and requires it not to be excessive. That means design verification must cover both water exposure and any air-side by-products of UV operation.

What terms does oSIST prEN IEC 60335-2-109:2026 define?

  • UV radiation water treatment appliance - An appliance that treats water using electromagnetic energy in the ultraviolet band through UV-C emitters.
  • UV-C emitter - A radiating source designed to emit non-ionizing electromagnetic energy at wavelengths from 100 nm to 280 nm.
  • Operation of the appliance with water at the most onerous temperature specified in the instructions - The defined operating condition used for testing at the worst water temperature allowed by the instructions.
  • Residual current device (RCD) - The protective device named in the installation instructions to reduce electric shock risk on the supply side.
  • IPX8 - The ingress-protection level used here for appliances intended to be used in water and tested by immersion.

Who uses oSIST prEN IEC 60335-2-109:2026?

Manufacturers use oSIST prEN IEC 60335-2-109:2026 when designing UV water treatment appliances, choosing enclosures, emitter replacement methods, earthing, and user instructions. Test laboratories use it for type testing, immersion tests, temperature-rise checks, abnormal-operation tests, and ozone assessment.

Quality managers, certification bodies, and buyers use it to verify that a product is in the right safety category and that the documentation matches the intended use. Installers and specifiers use it for placement, RCD protection, water-depth limits, and pressure conditions.

What changed in oSIST prEN IEC 60335-2-109:2026 from the previous edition?

oSIST prEN IEC 60335-2-109:2026 supersedes EN 60335-2-109:2010 and its amendments and corrigenda. The IEC edition identifies these main technical changes from the earlier edition: alignment with IEC 60335-1:2020, some notes converted into normative text, introduction of the IEC 60417 symbol for maximum operating depth, added external accessible surface temperature limits, clarified remote-operation requirements, and deletion of the harmful-radiation requirement because it is covered in Part 1.

Which standards are used with oSIST prEN IEC 60335-2-109:2026?

StandardWhat it contributes
IEC 60335-1General household-appliance safety requirements used with Part 2-109.
IEC 60584-1Thermocouple EMF specifications and tolerances for the surface-temperature probe.
IEC 60598-1:2020Fault-condition test conditions used in the abnormal-operation checks.
IEC 60529:1989 and amendmentsThe immersion method used for IPX8 testing.
IEC 60335-2-41Identifies pumps excluded from scope.
IEC 60598-2-11Identifies aquarium luminaires excluded from scope.
IEC 60598-2-18Identifies swimming-pool luminaires excluded from scope.

What does the oSIST prEN IEC 60335-2-109:2026 document contain?

The document contains the general Part 1-based safety structure plus UV-specific additions and modifications. Its most useful technical material is in the added subclauses under clauses 5, 6, 7, 11, 15, 19, 22, 25, 27 and 32.

Table 101 gives the maximum temperature rises for specified external accessible surfaces, and Figure 101 shows the probe used for surface-temperature measurement. Clause 22 contains the construction tests for leakage, emitter replacement, and prevention of UV discharge, while Clause 32 contains the ozone test setup for indoor appliances.

For design verification, type testing, or certification, the document gives the test conditions, marking content, installation notes, and safety checks needed to show that a UV radiation water treatment appliance is suitable for household and similar use.

Relations

Effective Date
28-Jul-2026
Effective Date
28-Jul-2026
Effective Date
30-Jan-2024
Effective Date
30-Jan-2024
Effective Date
30-Jan-2024
Effective Date
30-Jan-2024

Buy Documents

Draft

oSIST prEN IEC 60335-2-109:2026

English language (21 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

CIS Institut d.o.o.

Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.

SA Slovenia Verified

Kiwa BDA Testing

Building and construction product certification.

RVA Netherlands Verified

Kmetijski inštitut Slovenije

Agricultural Institute of Slovenia. Soil testing, plant health, agricultural product analysis.

SA Slovenia Verified

Sponsored listings

Frequently Asked Questions

oSIST prEN IEC 60335-2-109:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances". This standard covers: This European Standard deals with the safety of UV radiation water treatment appliances for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances

This European Standard deals with the safety of UV radiation water treatment appliances for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances

oSIST prEN IEC 60335-2-109:2026 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 97.030 - Domestic electrical appliances in general. The ICS classification helps identify the subject area and facilitates finding related standards.

oSIST prEN IEC 60335-2-109:2026 has the following relationships with other standards: It is inter standard links to SIST EN 60584-1:2014, SIST EN IEC 60598-1:2021, oSIST prEN IEC 60335-2-109:2026/oprAA:2026, SIST EN 60335-2-109:2011/A1:2018, SIST EN 60335-2-109:2011, SIST EN 60335-2-109:2011/A2:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

oSIST prEN IEC 60335-2-109:2026 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU, 2014/53/EU; Standardization Mandates: M/511, M/536. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

oSIST prEN IEC 60335-2-109:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2026
Gospodinjski in podobni električni aparati - Varnost - 2-109. del: Posebne zahteve
za naprave za obdelavo vode z UV-sevanjem
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements
for UV radiation water treatment appliances
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-109:
Besondere Anforderungen für Geräte zur Wasserbehandlung durch UV-Strahlung
Appareils électrodomestiques et analogues - Sécurité - Partie 2-109: Règles particulières
pour les appareils de traitement de l'eau par rayonnements ultraviolets
Ta slovenski standard je istoveten z: prEN IEC 60335-2-109:2026
ICS:
13.120 Varnost na domu Domestic safety
97.030 Električni aparati za dom na Domestic electrical
splošno appliances in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-109
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2026
ICS 97.030; 13.120 Will supersede EN 60335-2-109:2010; EN 60335-2-
109:2010/A1:2018; EN 60335-2-109:2010/A2:2018
English Version
Household and similar electrical appliances - Safety - Part 2-109:
Particular requirements for UV radiation water treatment
appliances
(IEC 60335-2-109:2023)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-109: Règles particulières pour les appareils de ähnliche Zwecke - Teil 2-109: Besondere Anforderungen für
traitement de l'eau par rayonnements ultraviolets Geräte zur Wasserbehandlung durch UV-Strahlung
(IEC 60335-2-109:2023) (IEC 60335-2-109:2023)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2026-12-11.

The text of this draft consists of the text of IEC 60335-2-109:2023.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 79356 Ref. No. prEN IEC 60335-2-109:2026 E

1 European foreword
2 This document (prEN IEC 60335-2-109:2026) consists of the text of IEC 60335-2-109:2023 prepared
3 by IEC/TC 61 "Safety of household and similar electrical appliances".
4 This document is currently submitted to the Enquiry.
5 The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards conflicting (dow) dav + 36 months
with this document have to be withdrawn (to be confirmed or
modified when voting)
6 This document will supersede EN 60335-2-109:2010 and all of its amendments and corrigenda (if
7 any).
8 This document is read in conjunction with prEN IEC 60335-2-109:2026/prAA:2026.
IEC 60335-2-109 ®
Edition 2.0 2023-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –

Part 2-109: Particular requirements for UV radiation water treatment appliances

Appareils électrodomestiques et analogues – Securité –

Partie 2-109: Exigences particulières pour les appareils de traitement de l'eau

par rayonnements ultraviolets
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120, 97.030 ISBN 978-2-8322-7817-8

– 2 – IEC 60335-2-109:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirement . 8
5 General conditions for the tests . 8
6 Classification . 8
7 Marking and instructions . 9
8 Protection against access to live parts . 10
9 Starting of motor-operated appliances . 11
10 Power input and current . 11
11 Heating . 11
12 Charging of metal-ion batteries . 12
13 Leakage current and electric strength at operating temperature . 12
14 Transient overvoltages . 12
15 Moisture resistance . 12
16 Leakage current and electric strength . 13
17 Overload protection of transformers and associated circuits . 13
18 Endurance . 13
19 Abnormal operation . 13
20 Stability and mechanical hazards . 13
21 Mechanical strength . 13
22 Construction . 13
23 Internal wiring . 15
24 Components . 15
25 Supply connection and external flexible cords . 15
26 Terminals for external conductors . 15
27 Provision for earthing . 15
28 Screws and connections . 16
29 Clearances, creepage distances and solid insulation . 16
30 Resistance to heat and fire . 16
31 Resistance to rusting . 16
32 Radiation, toxicity and similar hazards . 16
Annexes . 18
Bibliography . 19

Figure 101 – Probe for measuring surface temperatures . 17

Table 101 – Maximum temperature rises for specified external accessible surfaces
under normal operating conditions . 12

IEC 60335-2-109:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-109: Particular requirements
for UV radiation water treatment appliances

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 60335-2-109 has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances. It is an International Standard.
This second edition cancels and replaces the first edition published in 2010, Amendment 1:2013
and Amendment 2:2016. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) alignment with IEC 60335-1:2020;
b) modification or conversion of some notes to normative text (Clause 1, 6.2, 22.102);
c) introduction of IEC 60417 symbol for maximum operating depth (7.1, 7.6, 7.12.1);

– 4 – IEC 60335-2-109:2023 © IEC 2023
d) addition of external accessible surface temperature limits (11.3, 11.8);
e) clarification of requirements for remote operation (22.40, 22.49, 22.51);
f) the requirements to emit harmful radiation are deleted, because they are covered in Part 1
(Clause 32).
The text of this International Standard is based on the following documents:
Draft Report on voting
61/7011/FDIS 61/7075/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts of the IEC 60335 series, under the general title: Household and similar
electrical appliances – Safety, can be found on the IEC website.
This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its
amendments unless that edition precludes it; in that case, the latest edition that does not
preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.
NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.
This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to convert
that publication into the IEC standard: Particular requirements for UV radiation water treatment
appliances.
When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as
far as is reasonable. When this standard states “addition”, “modification” or “replacement”, the
relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including
those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.

IEC 60335-2-109:2023 © IEC 2023 – 5 –
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations can need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally
not earlier than 12 months or later than 36 months from the date of publication.

– 6 – IEC 60335-2-109:2023 © IEC 2023
INTRODUCTION
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
Guidance documents concerning the application of the safety requirements for appliances can
be accessed via TC 61 supporting documents on the IEC website
https://www.iec.ch/tc61/supportingdocuments
This information is given for the convenience of users of this International Standard and does
not constitute a replacement for the normative text in this standard.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal
use taking into account the manufacturer's instructions. It also covers abnormal situations that
can be expected in practice and takes into account the way in which electromagnetic
phenomena can affect the safe operation of appliances.
This standard takes into account the requirements of IEC 60364 as far as possible so that there
is compatibility with the wiring rules when the appliance is connected to the supply mains.
However, national wiring rules can differ.
If an appliance within the scope of this standard also incorporates functions that are covered
by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as
far as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with in
Part 1, Part 1 applies.
NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is
not necessary to specify particular requirements for the appliance in question over and above the general
requirements.
This standard is a product family standard dealing with the safety of appliances and takes
precedence over horizontal and generic standards covering the same subject.
NOTE 2 Horizontal publications, basic safety publications and group safety publications covering a haza
...