SIST EN 13209-1:2005
(Main)Child use and care articles - Baby carriers - Safety requirements and test methods - Part 1: Framed back carriers
Child use and care articles - Baby carriers - Safety requirements and test methods - Part 1: Framed back carriers
This part of prEN 13209 specifies the safety requirements and test methods for child back carriers with framed support. These framed carriers are intended for children who can sit unaided (approximately 6 months of age) and are designed to be attached to a carer's torso allowing a "hands free operation" when standing and/or walking.
Artikel für Säuglinge und Kleinkinder - Kindtertragen - Sicherheitstechnische Anforderungen und Prüfverfahren - Teil 1: Rückentragen mit Gestell
Dieses Dokument legt sicherheitstechnische Anforderungen an und Prüfverfahren für Rückentragen mit Gestell fest. Diese Tragen mit Gestell sind für Kinder vorgesehen, die ohne Hilfe sitzen können (etwa ab 6 Monaten); die Tragen sind am Oberkörper eines Erwachsenen zu befestigen, um diesem beim Stehen und Gehen Handfreiheit zur Ausübung von Tätigkeiten zu ermöglichen.
Articles de puériculture - Porte-enfants - Exigences de sécurité et méthodes d'essai - Partie 1 : Porte-enfants dorsaux avec armature
Le présent document spécifie les exigences de sécurité et les méthodes d'essai applicables aux porte-enfants dorsaux avec armature. Ces dispositifs a armature sont destinés a etre utilisés pour des enfants sachant s'asseoir seuls (âgés d'environ 6 mois) et sont destinés a etre attachés au buste d'un porteur en lui permettant de garder les mains libres lorsqu'il est debout ou qu'il marche.
Izdelki za otroke - Oprema za nošenje dojenčkov - Varnostne zahteve in preskusne metode – 1. del: Nahrbtniki z ogrodjem
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Child use and care articles - Baby carriers - Safety requirements and test methods - Part 1: Framed back carriersArticles de puériculture - Porte-enfants - Exigences de sécurité et méthodes d'essai - Partie 1 : Porte-enfants dorsaux avec armatureArtikel für Säuglinge und Kleinkinder - Kindtertragen - Sicherheitstechnische Anforderungen und Prüfverfahren - Teil 1: Rückentragen mit GestellTa slovenski standard je istoveten z:EN 13209-1:2004SIST EN 13209-1:2005en,fr,de97.190ICS:SLOVENSKI
STANDARDSIST EN 13209-1:200501-januar-2005
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13209-1September 2004ICS 97.190English versionChild use and care articles - Baby carriers - Safety requirementsand test methods - Part 1: Framed back carriersArticles de puériculture - Porte-enfants - Exigences desécurité et méthodes d'essai - Partie 1 : Porte-enfantsdorsaux avec armatureArtikel für Säuglinge und Kleinkinder - Kindtertragen -Sicherheitstechnische Anforderungen und Prüfverfahren -Teil 1: Rückentragen mit GestellThis European Standard was approved by CEN on 22 July 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13209-1:2004: E
EN 13209-1:2004 (E) 2 Contents page Foreword.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 General requirements and conditioning.5 4.1 Multi – purpose products.5 4.2 Order of tests.5 4.3 Tolerances.6 5 Materials.6 5.1 Chemical properties.6 5.2 Flammability of textiles, coated textiles, supports and plastic coverings.6 5.3 Conditioning.6 5.4 Shrinkage.7 5.5 Monofilament threads.7 6 Construction.7 6.1 Gaps and openings.7 6.2 Edges.7 6.3 Small parts.8 6.3.1 Requirements.8 6.3.2 Test method.8 6.4 Cords, straps, belts and parts used as ties.9 6.5 Folding and locking mechanisms.9 6.5.1 Durability of folding and locking mechanisms.9 6.5.2 Requirement.9 6.5.3 Moving parts.10 6.5.4 Incomplete deployment.10 6.6 Accessibility of fillings.10 6.6.1 Requirement.10 6.6.2 Test equipment.10 6.6.3 Test procedure.12 6.7 Stability.13 6.7.1 Requirements.13 6.7.2 Test.13 6.8 Carer attachment systems.13 6.8.1 General.13 6.8.2 Dimensions.13 6.8.3 Effectiveness of adjustment devices.13 6.8.4 Durability of attachment system.13 6.9 Dynamic strength.13 6.9.1 Requirement.13 6.9.2 Test apparatus.14 6.9.3 Test mass.15 6.9.4 Test procedure.15 6.10 Child restraint system.16 6.10.1 Requirements.16 6.10.2 Test equipment.16 6.10.3 Test methodology.17 7 Packaging.18
EN 13209-1:2004 (E) 3 8 Marking.18 8.1 General.18 8.2 Labels on product.19 8.3 Durability of marking.19 9 Instructions for use.19 Annex A (informative).21 Bibliography.22
EN 13209-1:2004 (E) 4 Foreword This document (EN 13209-1:2004) has been prepared by Technical Committee CEN/TC 252 “Child use and care articles”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 13209-1:2004 (E) 5 1 Scope This document specifies the safety requirements and test methods for child back carriers with framed support. These framed carriers are intended for children who can sit unaided (approximately 6 months of age) and are designed to be attached to a carer’s torso allowing a “hands free operation” when standing and/or walking. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 71-1, Safety of toys - Part 1: Mechanical and physical properties. EN 71-2, Safety of toys - Part 2: Flammability. EN 71-3, Safety of toys - Part 3: Migration of certain elements. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 carer’s attachment system fastenings, straps and/or belts which are fitted to the framed carrier for the purpose of securing the article to the carer’s torso 3.2 child restraint system assembly of fastening straps and/or a belt that is fitted to the framed carrier in order to restrain the child within the carrier 3.3 freestanding carriers carrier designed with a system that allows it to stand unsupported prior to the child being placed in the carrier 4 General requirements and conditioning 4.1 Multi – purpose products If a carrier has other functions not covered in this standard, reference should be made to the relevant standard e.g. child wheeled conveyance (see EN 1888). 4.2 Order of tests Unless specified the order of testing shall be carried out in the order of the clause numbers of this document. Additional samples may be used when doing the following tests: 5.1 Chemical properties 5.2 Flammability of textiles
EN 13209-1:2004 (E) 6 6.6 Accessibility of fillings 4.3 Tolerances Unless otherwise stated the following tolerances shall apply for testing and test equipment. All forces shall have an accuracy of ± 5 %. All masses shall have an accuracy of ± 1 %. All dimensions shall have an accuracy of ± 1 mm. All time measurements shall have an accuracy of ± 1 s. All angles shall have an accuracy of ± 1°. 5 Materials 5.1 Chemical properties The migration of synthetic or natural elements: coating of paint, varnish, lacquer, printing ink, polymer and similar coatings, the other materials whether mass coloured or not shall comply with the following amounts. Antimony :
60 mg/kg Arsenic
:
25 mg/kg Barium
: 1 000 mg/kg Cadmium :
75 mg/kg Chromium :
60 mg/kg Lead
:
90 mg/kg Mercury :
60 mg/kg Selenium :
500 mg/kg These limits shall be checked according to the test prescribed in EN 71-3. Where a surface coated with a multi-layer of paint or similar coating, the sample shall not include the substrate. 5.2 Flammability of textiles, coated textiles, supports and plastic coverings The rate of the spread of flame shall not exceed 30 mm/s when tested in accordance with EN 71-2. 5.3 Conditioning Any parts which are intended to be removed from the structure, shall be washed/dried or cleaned twice according to the manufacturer’s instructions.
EN 13209-1:2004 (E) 7 5.4 Shrinkage After testing in accordance with 5.3 any resulting shrinkage shall not prevent the covering from being refitted to the structure, without damaging the seams of the fabric and shall not impair the performance and use of the article. 5.5 Monofilament threads Monofilament threads shall not be used. 6 Construction 6.1 Gaps and openings There shall be no open-ended tubes, projections, holes or loose washers, speed fixings, nuts or crevices in which the child’s finger or flesh could become trapped. When the carrier is assembled for use in any configuration, there shall be no gaps and openings greater than 5 mm and less than 12 mm, unless the depth of penetration is less than 10 mm. Buckles, fastenings and sliders are excluded from this requirement. 6.2 Edges In order to avoid lacerations or abrasions, the surfaces shall be smooth and free from splinters and burrs. Edges or components with a thickness greater than 4 mm and an internal angle of less than 120° shall have a 2 mm radius or be chamfered as given in the examples in Figure 1a) b) and c). Edges or components with a thickness less than 4 mm shall be rounded, folded, rolled or spiralled (as given in the example in Figure 1d); or have a protective covering as given in the example in Figure 1e). The minimum radii do not apply to small components such as hinges, brackets and catches but these shall be free of burrs and sharp edges and points. Any protective covering applied in order to meet the above specifications shall comply with the requirements for protective components specified in EN 71–1.
EN 13209-1:2004 (E) 8 Dimensions in millimetres
Figure 1 — Examples for minimum radii of edges and corners 6.3 Small parts 6.3.1 Requirements Any components not intended to be detachable, which become detached when tested in accordance with 6.3.2.2 and 6.3.2.3 shall not, fit wholly within the small parts cylinder specified in EN 71-1. Any component intended to be removable without the use of a tool shall not fit wholly within the small parts cylinder as specified in EN 71-1. 6.3.2 Test method 6.3.2.1 Apparatus Means of applying forces up to at least 90 N with an accuracy of ± 2 N, e.g. a spring balance or a dead weight arrangement. Feeler gauge with thickness of (0,4 ± 0,02) mm, with the end to be inserted having a radius of approximately 3 mm.
EN 13209-1:2004 (E) 9 6.3.2.2 Tension test Establish if the component to be tested is grippable by inserting the feeler gauge between the component and the underlying layer or body of the item at an angle between 0° and 10° from the surface using a force of (1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.