SIST-TS CEN ISO/TS 13830:2014
(Main)Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013)
Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013)
ISO/TS 13830 provides guidance on the content of voluntary labels for consumer products containing manufactured nano-objects (PCMNO). This Technical Specification is not applicable to consumer products that contain naturally occurring nano-objects that were not subjected to manufacturing processes. Consumer products containing nanoobjects that are incidentally present (i.e. unintentional by-products of a process) are also outside the scope of this Technical Specification.
Nanotechnologien - Leitfaden zur freiwilligen Kennzeichnung für industriell hergestellte Nanoobjekte enthaltende Konsumartikel (ISO/TS 13830:2013)
Diese Technische Spezifikation bietet einen Leitfaden zum Format und Inhalt der freiwilligen Kennzeichnung
für industriell hergestellte Nanoobjekte (MNO) und Produkte, Zubereitungen und Gemische, die MNO
enthalten.
Sie enthält auch eine Anleitung zur Verwendung des Präfix „nano/Nano“ in diesen Produktkennzeichnungen.
Diese Technische Spezifikation ist für die Anwendung durch Firmen und andere Organisationen, die in die
Herstellung, Verteilung, Auslieferung, Handhabung, Verwendung und Entsorgung von MNO oder MNO
enthaltenden Produkten (PCMNO) bzw. nanoskalige Phänomene zeigenden Produkten (siehe 3.9)
eingebunden sind, ausgelegt. Für andere Kreise wie Behörden, Gesundheitspersonal, Endverbraucher,
Verbraucherorganisationen, regierungsunabhängige Umweltorganisationen und Gewerkschaften kann sie
ebenfalls hilfreich sein.
Diese Technische Spezifikation gilt nicht für Nanoobjekte, die in natürlichen Prozessen (z. B. vulkanische
Vorgänge) entstehen und keiner weiteren Verarbeitung unterzogen werden. Beiläufig anfallende Nanoobjekte
(z. B. bei Dieselverbrennung entstehende und ähnliche Umweltschadstoffe) liegen außerhalb des
Anwendungsbereiches dieser Technischen Spezifikation. Im Rahmen dieser Technischen Spezifikation
umfasst der Begriff „industriell hergestellt“ natürliche Materialien, die modifiziert wurden.
Es wird auf geeignete Kennzeichnung von Produkten verwiesen, die Phänomene auf Grund Ihrer
Nanoskaligkeit aufweisen (siehe 3.9).
In Anbetracht der sehr schnellen nanotechnologischen Entwicklungen bezüglich der Charakterisierung und
Effekte von MNO impliziert die nach dieser Technischen Spezifikation relevante Kennzeichnung keine
Kenntnisse oder Eigenschaften, für die nur begrenzte oder keine wissenschaftlichen Daten verfügbar sind.
Für eine Entscheidung, was zum Kennzeichnen von Produkten relevant ist, ist vorgesehen, dass sich die
Anwender dieses Leitfadens, soweit möglich, bezüglich MNO und PCMNO in den Bereichen des öffentlichen
Nanotechnologies - Lignes directrices pour l'étiquetage volontaire des produits contenant des nano-objets manufacturés (ISO/TS 13830:2013)
.browseRow1 { background-color: #FFFFFF; }
.browseRow2 { background-color: #EEEEEE; }
Livelink - Error
Error stack\n----> 1) E662241283:Read Accessibility error. Not enough permissions.:\n" )
}
// -->
function checkTabKey()
{
if ( window.event.keyCode == 9 )
return true
else
return false
}
function goToURL( url )
{
if ( ( parent == self ) || ( parent.ButtonBarFrame != null ) )
{
location.href = url;
}
else
{
parent.location.href = url;
}
}
Livelink Error
.chickletImage { behavior: url('/isostdsupport/pngbehavior.htc'); }
baseURL = "/isostd/livelink"
function resetPopup()
{
}
contentTable = true
Livelink Error: Error opening item.
[Sorry, the item you requested could not be accessed. Either it does not exist or you do not have permission to access it. If you were sent a link to this item, please contact the sender for assistance.]
if ( window.contentTable )
{
if ( contentTable )
{
document.write( '' )
}
}
Livelink ® Version 9.5.0, Copyright © 1995-2005 Open Text Inc. All rights reserved.
if ( window.contentTable )
{
if ( contentTable )
{
document.write( '' )
}
}
Nanotehnologija - Navodila za prostovoljno označevanje proizvodov, namenjenih potrošnikom, ki vsebujejo nanoobjekte (ISO/TS 13830:2013)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 13830:2014
01-februar-2014
1DQRWHKQRORJLMD1DYRGLOD]DSURVWRYROMQRR]QDþHYDQMHSURL]YRGRYQDPHQMHQLK
SRWURãQLNRPNLYVHEXMHMRQDQRREMHNWH ,6276
Nanotechnologies - Guidance on voluntary labelling for consumer products containing
manufactured nano-objects (ISO/TS 13830:2013)
Nanotechnologien - Leitfaden zur freiwilligen Kennzeichnung für industriell hergestellte
Nanoobjekte enthaltende Konsumartikel (ISO/TS 13830:2013)
Nanotechnologies - Lignes directrices pour l'étiquetage volontaire des produits contenant
des nano-objets manufacturés (ISO/TS 13830:2013)
Ta slovenski standard je istoveten z: CEN ISO/TS 13830:2013
ICS:
07.120 Nanotehnologije Nanotechnologies
SIST-TS CEN ISO/TS 13830:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 13830:2014
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 13830:2014
TECHNICAL SPECIFICATION
CEN ISO/TS 13830
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
December 2013
ICS 07.030
English Version
Nanotechnologies - Guidance on voluntary labelling for
consumer products containing manufactured nano-objects
(ISO/TS 13830:2013)
Nanotechnologies - Lignes directrices pour l'étiquetage Nanotechnologien - Leitfaden zur freiwilligen
volontaire des produits de consommation contenant des Kennzeichnung für industriell hergestellte Nanoobjekte
nano-objets manufacturés (ISO/TS 13830:2013) enthaltende Konsumartikel (ISO/TS 13830:2013)
This Technical Specification (CEN/TS) was approved by CEN on 2 December 2013 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 13830:2013 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 13830:2014
CEN ISO/TS 13830:2013 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 13830:2014
CEN ISO/TS 13830:2013 (E)
Foreword
This document (CEN ISO/TS 13830:2013) has been prepared by Technical Committee CEN/TC 352
“Nanotechnologies”, the secretariat of which is held by AFNOR, in collaboration with Technical Committee
ISO/TC 229 “Nanotechnologies”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 13830:2013 has been approved by CEN as CEN ISO/TS 13830:2013 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST-TS CEN ISO/TS 13830:2014
---------------------- Page: 6 ----------------------
SIST-TS CEN ISO/TS 13830:2014
TECHNICAL ISO/TS
SPECIFICATION 13830
First edition
2013-12-15
Nanotechnologies — Guidance on
voluntary labelling for consumer
products containing manufactured
nano-objects
Nanotechnologies — Lignes directrices pour l’étiquetage volontaire
des produits contenant des nano-objets manufacturés
Reference number
ISO/TS 13830:2013(E)
©
ISO 2013
---------------------- Page: 7 ----------------------
SIST-TS CEN ISO/TS 13830:2014
ISO/TS 13830:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
---------------------- Page: 8 ----------------------
SIST-TS CEN ISO/TS 13830:2014
ISO/TS 13830:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Content of label . 2
4.1 General . 2
4.2 Content . 3
5 Obtaining information from other sources . 3
6 Format of label . 4
6.1 General . 4
6.2 Placing of information . 4
Annex A (informative) Examples . 5
Bibliography . 6
© ISO 2013 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST-TS CEN ISO/TS 13830:2014
ISO/TS 13830:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 229, Nanotechnologies.
For the purposes of research, users are encouraged to share their views on this document and their
priorities for changes to future editions.
Click on the link below to take part in the online survey:
https://www.surveymonkey.com/s/ISO_TS_13830
iv © ISO 2013 – All rights reserved
---------------------- Page: 10 ----------------------
SIST-TS CEN ISO/TS 13830:2014
ISO/TS 13830:2013(E)
Introduction
It is generally agreed that nanotechnology brings benefits and better performance to enabled consumer
products along with possible concerns for adverse effects, which both raise issues about the public
awareness on the benefits and concerns.
As nanotechnology is implemented more broadly, the number of products using nanotechnology, in
particular the consumer products containing manufactured nano-objects, will increase. Any approach
to affixing a label to consumer products containing manufactured nano-objects (PCMNOs) should
ensure accurate communication about the product and its properties and avoid misleading labelling.
It is important that sufficient openness and transparency accompany the responsible introduction
of new technologies to the marketplace. Labelling can help consumers to make informed choices for
purchase and use. The labelling specified by this Technical Specification does not attempt to prejudge
either the positive or negative effects of consumer products containing manufacture
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.