SIST EN ISO 1043-3:2000

Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996)

Provides uniform symbols for components of terms relating to plasticizers for plastics in terms of abbreviations. Contains in general, only those abbreviations that have come into established use in practice. Replaces the first edition.

Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 3: Weichmacher (ISO 1043-3:1996)

Dieser Teil von ISO 1043 stellt einheitliche Kennbuchstaben für Weichmacherkomponenten zur Verfügung, aus denen die Kurzzeichen für Weichmacher abgeleitet werden können. Er enthält generell nur die Kurzzeichen, die allgemein eingeführt sind. Der Zweck dieses Teils von ISO 1043 ist es, dem Auftreten von mehr als einem Kurzzeichen für einen gegebenen Weichmacher vorzubeugen. Die Kennbuchstaben sind in erster Linie dazu gedacht, passende Buchstaben vorzugeben, aus denen die Kurzzeichen für die chemischen Bezeichnungen in Veröffentlichungen und anderen Schriftstücken zusammengesetzt werden können.

Plastiques - Symboles et abréviations - Partie 3: Plastifiants (ISO 1043-3:1996)

La présente partie de l'ISO 1043 fournit des symboles uniformes correspondant aux éléments des abrévitions relatives aux plastifiants. Elle ne comprend, d'une manière générale, que les abréviations consacrées par l'usage. Le but de la présente partie de l'ISO 1043 est de prévenir l'apparition de plusieurs abréviations pour un plastifiant donné. Les symboles sont, avant tout, destinés à constituer la base d'un mode pratique de rédaction abrégé des appellations chimiques utilisées dans les publications et autres documents écrits.

Polimerni materiali - Simboli in kratice - 3. del: Mehčala (ISO 1043-3:1996)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2000
• Withdrawal Date: 17-Nov-2016
• ICS: 01.075 - Character symbols
• ICS: 83.040.30 - Auxiliary materials and additives for plastics
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 18-Nov-2016
• Due Date: 11-Dec-2016
• Completion Date: 18-Nov-2016
• Ref Project: EN ISO 1043-3:1999 - Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996)

Relations

• Replaced By: SIST EN ISO 1043-3:2017 - Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
• Effective Date: 16-Nov-2016
• Replaced By: SIST EN ISO 1043-3:2017 - Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
• Effective Date: 08-Jun-2022
• Replaces: SIST ISO 1043-3:1996 - Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers
• Effective Date: 01-May-2000
• Revised: SIST EN ISO 1043-3:2017 - Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:2016)
• Effective Date: 01-Oct-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1043-3:2000
01-maj-2000
1DGRPHãþD
SIST ISO 1043-3:1996
3ROLPHUQLPDWHULDOL6LPEROLLQNUDWLFHGHO0HKþDOD,62
Plastics - Symbols and abbreviated terms - Part 3: Plasticizers (ISO 1043-3:1996)
Kunststoffe - Kennbuchstaben und Kurzzeichen - Teil 3: Weichmacher (ISO 1043-
3:1996)
Plastiques - Symboles et abréviations - Partie 3: Plastifiants (ISO 1043-3:1996)
Ta slovenski standard je istoveten z: EN ISO 1043-3:1999
ICS:
01.075 Simboli za znake Character symbols
83.040.30 Pomožni materiali in aditivi Auxiliary materials and
za polimerne materiale additives for plastics
SIST EN ISO 1043-3:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1043-3:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 1043-3:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 1043-3:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 1043-3:2000
ISO
INTERNATIONAL
STANDARD 1043-3
Second edition
1996-04-15
Plastics - Symbols and abbreviated
terms -
Part 3:
Plasticizers
- Symboles et abrhations -
Plas tiques
Partie 3: Plas tifian ts
Reference number
ISO 1043-3:1996( E)

---------------------- Page: 5 ----------------------

SIST EN ISO 1043-3:2000
ISO 1043=3:1996(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide fed-
eration of national Standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be rep-
resented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO col-
laborates closely with the International Electrotechnical Commission (IEC)
on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are cir-
culated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 1043-3 was prepared by Technical Committee
lSO/TC 61, Plastics, subcommittee SC 1, Terminology.
This second edition cancels and replaces the first edition (ISO 1043-37 988)
and includes the following changes:
The Iist of plasticizers has been updated and the Chemical Abstracts
Service Registry Number (CAS-RN) has been added where available.
lowing Parts, under the general title Plastics -
ISO 1043 consists of the fol
Symbols and abbreviations:
- Part 7: Basic polymers and their special characteristics
- Part 2: Fillers and reinforcing materials
- Part 3: Plasticizers
- Part 4: Flame retardan ts
Annex A forms an integral part of this part of ISO 1043.
0 ISO 1996
All rights reserved. Unless otherwise specified, no part of this publication may be repro-
duced or utilized in any form or by any means, electronie or mechanrcal, including photo-
copying and mrcrofilm, without Permission In writing from the pubiisher.
International Organrzation for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 1043-3:2000
INTERNATIONAL STANDARD @ ISO ISO 1043=3:1996(E)
- Symbols and abbreviated terms -
Plastics
Part 3:
Plasticizers
1 Scope
1.1 This part of ISO 1043 provides uniform Symbols for components of terms relating to plasticizers to form
abbreviated terms. lt includes, in general, only those abbreviated terms that have come into established use.
1.2 The purpose of this part of ISO 1043 is to prevent the occurrence of more than one abbreviated term for a
given plasticizer. The Symbols are primarily intended to be a convenient shorthand for forming abbreviated terms
for Chemical names in publications and other written matter.
2
Use of the Symbols and abbreviated terms
2.1 The first appearance of an abbreviated term in a text shall be enclosed in parentheses and shall be preceded
by the Chemical name written in full.
2.2 Only capital letters shall be used for the Symbols.
2.3 The Iist comprises the abbreviated term, the commonly used name or names, and the IUPACI) equivalent
and the CAS-RN*) where these are available. In cases where IUPAC nomenclature or the CAS-RN are not available
due to uncertainty or ambiguity, this is indicated in the text.
The commonly used Chemical name or the IUPAC name given in this part of ISO 1043 shall be referred to when
defining each abbreviated term.
It should be recognized that, in use in the rubber and plastics industries, many plasticizers are “commercial” or
NOTE -
“technical” grades and not necessarily pure forms of substances.
2.4 A list of Symbols for individual components of abbreviated terms is given in annex A.
2.5
Mixtures of plasticizers are not considered in this part of ISO 1043.
2.6 Unless otherwise indicated, the alkyl groups are n-alkyl groups and phthalates are esters of o-phthalic acid.
1) International Union of Pure and Applied Chemistry.
2) Chemical Abstracts Service Registry Number.

---------------------- Page: 7 ----------------------

SIST EN ISO 1043-3:2000
0 ISO
ISO 1043=3:1996(E)
2.7 No Symbol is used in the abbreviated terms to indicate normal (n-) linear alcohols. For branched (iso) alcohols,
the additional Symbol I is used, with one exception: in view of worldwide usage of the Symbol 0 for Z-ethylhexyl
(for exampie, in DOA and DOP), this practice is observed in this part of ISO 1043 and the n-octyl group is desig-
nated NO (as in DNOP). Because of this dual usage, the application of the rule specified in 2.1 is most important.
2.8 The Symbol I designates iso-branched groups (for example, DIOP). However, DTDP is sometimes used
instead of DITDP because di-n-tridecyl phthalate is not used as a plasticizer; when DTDP is used, the application of
the rule specified in 2.1 is most important.
2.9 For plasticizers based on di-esters of the Same alcohol, the first Symbol of the abbreviated term is D.
2.10 The letter P may be used in place of F for “phosphate” in abbreviated terms for plasticizers.
names indicating branched groups may consist of several isomers. For this
2.11 Several plasticizers having “iso”
reason, no Single IUPAC name tan describe the detailed Chemical composition of each of these plasticizers.
2.12 Some plasticizers consisting of esters of more than one alcohol are known by a combined number and Ietter
Code, e.g. 71 IA is an alternative common name for heptyl nonyl undecyl adipate (HNUA). The first digit represents
the number of carbon atoms in the shortest alkyl group and the second and third digits represent that of the long-
est alkyl group in the plasticizer; thus 7 denotes heptyl and 11 denotes undecyl. The letter at the end of the code is
either A, which denotes adipate, or P, which denotes phthalate.
3 Schedule of terms
IUPAC equivalent
Abbreviated Common name CAS-RN
ASE al kylsulfonic acid ester alkanesuifonates
or aikyi alkanesuifonat
...