SIST EN 62002-2:2008
(Main)Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing
Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing
This part of IEC 62002 provides the conformance testing rules and guidelines for equipment built to meet the Mobile and portable DVB-T/H radio access interface specification (IEC 62002-1). One aim is to limit the number of tests to a practical level. Nevertheless, the manufacturer is responsible of guaranteeing that the terminal fulfils all aspects of the mobile and portable DVB-T/H radio access interface specification (see IEC 62002-1).
Mobiler und tragbarer Funkzugang zu DVB-T/H - Teil 2: Konformitätsprüfung der Schnittstelle
Accès radio DVB-T/H vers les mobiles et les portables - Partie 2: Contrôles de conformité de l'interface
La CEI 62002-2:2008 fournit les règles et les lignes directrices applicables aux essais de conformité des équipements construits pour satisfaire à la norme CEI 62002-1, accès radio mobile et portable en DVB-T/H. Elle vise notamment à limiter le nombre des essais à une valeur pratique. Il incombe néanmoins au fabricant de garantir que le terminal satisfait à tous les aspects de la spécification de l'accès radio mobile et portable en DVB-T/H (CEI 62002-1). Cette deuxième édition annule et remplace la première édition, parue en 2005. Elle constitue une révision technique. Les principales modifications par rapport à l'édition précédente sont: Le DVB-H a été intégré dans la spécification principale. Tous les chiffres décrivant les performances ont été révisés pour tenir compte des nouveaux résultats de simulation et du développement de nouveaux récepteurs de référence DVB-H. Le DVB-H inclut à présent l'ensemble des différents débits du code MPE-FEC. De nouveaux types de canaux de propagation "portable en intérieur" et "portable en extérieur" ont été ajoutés ainsi que les performances chiffrées avec ces canaux. Un nouveau canal d'essai SFN mobile 2x TU-6 a été inclus. Un nouveau type de linéarité L4 a été ajouté. De nouveaux chiffres décrivant les performances particulières du DVB-H pour les types d'interférences S1, S2, L1 à L4 ont été intégrés. Une nouvelle méthode de mesure des interférences GSM a été ajoutée. La présente version bilingue (2012-03) correspond à la version anglaise monolingue publiée en 2008-05.
Dostop do mobilnega in prenosnega DVB-T/H radia - 2. del: Preskušanje skladnosti vmesnika (IEC 62002-2:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62002-2:2008
01-november-2008
1DGRPHãþD
SIST EN 62002-2:2007
Dostop do mobilnega in prenosnega DVB-T/H radia - 2. del: Preskušanje
skladnosti vmesnika (IEC 62002-2:2008)
Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing (IEC
62002-2:2008)
Mobiler und tragbarer Funkzugang zu DVB-T/H - Teil 2: Konformitätsprüfung der
Schnittstelle (IEC 62002-2:2008)
Accès radio DVB-T/H vers les mobiles et les portables - Partie 2: Contrôles de
conformité de l'interface (CEI 62002-2:2008)
Ta slovenski standard je istoveten z: EN 62002-2:2008
ICS:
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
SIST EN 62002-2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62002-2:2008
---------------------- Page: 2 ----------------------
SIST EN 62002-2:2008
EUROPEAN STANDARD
EN 62002-2
NORME EUROPÉENNE
August 2008
EUROPÄISCHE NORM
ICS 33.170 Supersedes EN 62002-2:2006
English version
Mobile and portable DVB-T/H radio access -
Part 2: Interface conformance testing
(IEC 62002-2:2008)
Accès radio DVB-T/H Mobiler und tragbarer Funkzugang
vers les mobiles et les portables - zu DVB-T/H -
Partie 2: Contrôles de conformité Teil 2: Konformitätsprüfung
de l'interface der Schnittstelle
(CEI 62002-2:2008) (IEC 62002-2:2008)
This European Standard was approved by CENELEC on 2008-06-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62002-2:2008 E
---------------------- Page: 3 ----------------------
SIST EN 62002-2:2008
EN 62002-2:2008 – 2 –
Foreword
The text of document 100/1290/CDV, future edition 2 of IEC 62002-2, prepared by IEC TC 100, Audio,
video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62002-2 on 2008-06-01.
This European Standard supersedes EN 62002-2:2006.
The main changes with respect to EN 62002-2:2006 are listed below:
– DVB-H has been included as a part of the main specification;
– all the performance figures have been revised as new simulation results have been made available as
well as new reference receivers for DVB-H have been developed;
– DVB-H now includes all the different MPE-FEC code rates;
– new portable indoor and portable outdoor channel models have been included as well as performance
figures for those;
– a new 2x TU-6 mobile SFN test channel has been included;
– a new L4 linearity pattern has been added;
– dedicated performance figures for DVB-H for S1, S2, L1 to L4 interference patterns have been
included;
– new GSM-interference measurement method has been added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-03-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2011-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62002-2:2008 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 62002-2:2008
– 3 – EN 62002-2:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
- - Digital Video Broadcasting (DVB): Framing ETSI EN 300 744 2007
structure, channel coding and modulation for
digital terrestrial television
1) 2)
IEC 62002-1 - Mobile and portable DVB-T/H radio access - EN 62002-1 2008
Part 1: Interface specification
1)
ITU-R BT.1701-1 - Charactistics of radiated signals of - -
conventional analogue television systems
1)
Undated reference.
2)
Valid edition at date of issue.
---------------------- Page: 5 ----------------------
SIST EN 62002-2:2008
---------------------- Page: 6 ----------------------
SIST EN 62002-2:2008
IEC 62002-2
Edition 2.0 2008-05
INTERNATIONAL
STANDARD
Mobile and portable DVB-T/H radio access –
Part 2: Interface conformance testing
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
X
ICS 33.170 ISBN 2-8318-9749-1
---------------------- Page: 7 ----------------------
SIST EN 62002-2:2008
– 2 – 62002-2 © IEC:2008(E)
CONTENTS
FOREWORD.6
1 Scope.8
2 Normative references .8
3 Abbreviations .8
4 Test conditions .10
4.1 General test conditions.10
4.1.1 General .10
4.1.2 Temperature.10
4.1.3 Voltage.11
4.2 Terminal categories and summarized measurement conditions .11
4.3 Required equipment .12
4.4 Reference model and test point .12
4.5 Degradation criteria and resynchronization.13
4.6 Definition of C/N .15
4.7 Definition of measurement signals.15
4.7.1 Wanted DVB-T/H signal and interfering DVB-T signal definition.15
4.7.2 Interfering signal definitions.16
5 C/N performance .18
5.1 Definition and applicability.18
5.2 Minimum requirements .18
5.2.1 C/N performance in Gaussian channel .18
5.2.2 C/N performance in portable channel .19
5.2.3 C/N performance in portable indoor (PI) and portable outdoor (PO)
channels.19
5.2.4 C/N performance in mobile channels.20
5.3 Test purpose .21
5.4 Method of test .22
5.4.1 Initial conditions .22
5.4.2 Measurement setup .22
5.4.3 Procedure.23
5.5 Test requirement .23
6 Receiver minimum and maximum input signal levels.24
6.1 Definition and applicability.24
6.2 Minimum requirements .24
6.2.1 Minimum input levels .24
6.2.2 Maximum input levels for wanted signals .24
6.3 Test purpose .24
6.4 Method of test .24
6.4.1 Initial conditions .24
6.4.2 Measurement setup .25
6.4.3 Procedure.25
6.5 Test requirement .25
7 Immunity to analogue and/or digital signals in other channels.26
7.1 Definition and applicability.26
7.2 Minimum requirements .26
7.2.1 Immunity to pattern S1 .26
---------------------- Page: 8 ----------------------
SIST EN 62002-2:2008
62002-2 © IEC:2008(E) – 3 –
7.2.2 Immunity to pattern S2 .27
7.2.3 Immunity to pattern L1.27
7.2.4 Immunity to pattern L2.28
7.2.5 Immunity to pattern L3.28
7.2.6 Immunity to pattern L4.29
7.3 Test purpose .30
7.4 Method of test .30
7.4.1 Initial conditions .30
7.4.2 Measurement setup .34
7.4.3 Procedure.35
7.5 Test requirement .35
8 Immunity to co-channel interference from analogue TV signals.35
8.1 Definition and applicability.35
8.2 Minimum requirements .35
8.3 Test purpose .36
8.4 Method of test .36
8.4.1 Initial conditions .36
8.4.2 Measurement setup .36
8.4.3 Procedure.37
8.5 Test requirement .37
9 Guard interval utilization: echoes within guard interval .37
9.1 Definition and applicability.37
9.2 Minimum requirements .37
9.3 Test purpose .37
9.4 Method of test .37
9.4.1 Initial conditions .37
9.4.2 Measurement setup .38
9.4.3 Procedure.38
9.5 Test requirement .39
10 Guard interval utilization: echoes outside the guard interval .39
10.1 Definition and applicability.39
10.2 Minimum requirements .39
10.3 Test purpose .40
10.4 Method of test .40
10.4.1 Initial conditions .40
10.4.2 Measurement setup .40
10.4.3 Procedure.41
10.5 Test requirement .41
11 Tolerance to impulse interference.41
11.1 Definition and applicability.41
11.2 Minimum requirements .41
11.3 Test purpose .42
11.4 Method of test .42
11.4.1 Initial conditions .42
11.4.2 Measurement setup .42
11.4.3 Procedure.43
11.5 Test requirement .43
12 GSM900 TX signal blocking test .43
---------------------- Page: 9 ----------------------
SIST EN 62002-2:2008
– 4 – 62002-2 © IEC:2008(E)
12.1 Definition and applicability.43
12.2 Minimum requirements .44
12.2.1 Minimum input levels .44
12.3 Test purpose .44
12.4 Method of test .44
12.4.1 Initial conditions .44
12.4.2 Measurement setup .44
12.4.3 Procedure.45
12.5 Test requirements .45
13 Mobile SFN channel test.45
13.1 Definition and applicability.45
13.2 Minimum requirements .45
13.3 Test purpose .47
13.4 Method of test .47
13.4.1 Initial conditions .47
13.4.2 Measurement setup .47
13.4.3 Procedure.47
13.5 Test requirements .48
Bibliography.49
Figure 1 – Reference model.13
Figure 2 – DVB-H measurement stream.15
Figure 3 – PAL interfering signals .17
Figure 4 – SECAM L interfering signal .17
Figure 5 – Example of a possible measurement setup in C/N performance tests .22
Figure 6 – Example of a possible measurement setup in minimum and maximum
receiver signal input level tests .25
Figure 7 – Pattern S1: wanted DVB-T/H channel with N+1 or N–1 analogue interferer.30
Figure 8 – Pattern S2: wanted DVB-T/H channel with N + 1 or N – 1 digital DVB-T
interferer.31
Figure 9 – Pattern L1: wanted DVB-T/H channel with one analogue signal on N + 4
channel and one digital DVB-T signal on N + 2 channel .32
Figure 10 – Pattern L2: wanted DVB-T/H channel with one analogue signal on N + 4
channel and another analogue signal on N + 2 channel.32
Figure 11 – Pattern L3: Wanted DVB-T/H signal with one digital DVB-T signal on N + 4
channel and another digital DVB-T signal on N + 2 channel .33
Figure 12 – Pattern L4: Wanted DVB-T/H signal with one analogue signal in C4/VHF III
and one DVB-T signal in C21/UHF.34
Figure 13 – Example of a possible measurement setup to test the immunity to
analogue and/or to digital signals in other channels .34
Figure 14 – Example of a possible measurement setup to test the immunity to co-
channel interference from analogue TV signals.36
Figure 15 – Example of possible measurement setup to test echoes within the guard
interval .38
Figure 16 – Echo outside guard interval mask.39
Figure 17 – Example of a possible measurement setup to test echoes outside guard
interval .40
Figure 18 – Definition of the impulse interference test pattern.42
---------------------- Page: 10 ----------------------
SIST EN 62002-2:2008
62002-2 © IEC:2008(E) – 5 –
Figure 19 – Example of a measurement setup to test impulse noise interference .43
Figure 20 – Example of a measurement setup to test GSM900 TX signal blocking .44
Figure 21 – Example of a measurement setup in mobile SFN test.47
Table 1 – Valid conformance measurements for different terminal categories .11
Table 2 – Delta values between picture failure point and reference BER.14
Table 3 – DVB-H measurement streams .16
Table 4 – C/N (dB) in Gaussian channel.18
Table 5 – DVB-H C/N (dB) for 5 % MFER in Gaussian channel.18
Table 6 – C/N (dB) in portable channel.19
Table 7 – C/N (dB) for 5 % MFER in portable channel .19
Table 8 – C/N (dB) for 5 % ESR in PI & PO channel.19
Table 9 – C/N (dB) for 5 % MFER in PI & PO channel.20
Table 10 – C/N (dB) for 5 % ESR in typical urban channel .20
Table 11 – C/N (dB) for MFER 5 % for DVB-H .21
Table 12 – Immunity to pattern S1 .26
Table 13 – Immunity to pattern S1 for DVB-H.26
Table 14 – Immunity to pattern S2 .27
Table 15 – Immunity to pattern S2 for DVB-H.27
Table 16 – Immunity to pattern L1.28
Table 17 – Immunity to pattern L1 for DVB-H .28
Table 18 – Immunity to pattern L2.28
Table 19 – Immunity to pattern L2 for DVB-H .28
Table 20 – Immunity to pattern L3.29
Table 21 – Immunity to pattern L3 for DVB-H .29
Table 22 – Signal levels for pattern L4.29
Table 23 – Immunity to pattern L4.29
Table 24 – Immunity to pattern L4 for DVB-H .29
Table 25 – Immunity to analogue co-channel .35
Table 26 – Immunity to co-channel interference from analogue signals for DVB-H .36
Table 27 – Performance with echoes within the guard interval .37
Table 28 – Paths in echoes within guard interval measurement .38
Table 29 – Delay of the corner point Tc.39
Table 30 – Definition of the value Δ .39
Table 31 – Definition of the inflection point .40
Table 32 – Measurement conditions, modes and requirements used for impulse noise .41
Table 33 – C/N (dB) for MFER 5 % for DVB-H .45
Table 34 – Mobile SFN-channel for weak long echo.46
Table 35 – Mobile SFN-channel for strong long echo .46
Table 36 – Mobile SFN-channel for strong short echo .47
---------------------- Page: 11 ----------------------
SIST EN 62002-2:2008
– 6 – 62002-2 © IEC:2008(E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MOBILE AND PORTABLE DVB-T/H RADIO ACCESS –
Part 2: Interface conformance testing
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.