SIST EN 61291-2:2012
(Main)Optical amplifiers - Part 2: Digital applications - Performance specification template (IEC 61291-2:2012)
Optical amplifiers - Part 2: Digital applications - Performance specification template (IEC 61291-2:2012)
This performance specification template applies to single channel optical amplifier (OA) devices to be used in digital applications. For multichannel applications, use IEC 61291, Part 4. The object of this performance specification template is to provide a frame for the preparation of detail specifications on the performances of single channel OA devices to be used in digital applications. Detail specification writers may add specification parameters and/or groups of specification parameters for particular applications. However, detail specification writers may not remove specification parameters specified in this standard.
Lichtwellenleiter-Verstärker - Teil 2: Digitale Anwendungen - Vorlage für Betriebsverhaltensspezifikationen (IEC 61291-2:2012)
Amplificateurs optiques - Partie 2: Applications numériques - Modèles de spécifications de performances (CEI 61291-2:2012)
La CEI 61291-2:2012 s'applique aux dispositifs amplificateurs optiques (AO) à un seul canal, destinés à être utilisés dans le cadre d'applications numériques. Pour les applications multicanaux, utiliser la CEI 61291, Partie 4. L'objet de ce modèle de spécifications de performances est de fournir une trame de préparation de spécifications particulières relatives aux performances des dispositifs AO à un seul canal destinés à être utilisés dans le cadre d'applications numériques. Cette édition constitue une mise à jour mineure, consistant en une clarification du domaine d'application, mentionnant uniquement les amplificateurs optiques pour un seul canal, et les paramètres de fuite de pompage ne s'appliquent pas aux amplificateurs optiques à semiconducteurs.
Optični ojačevalniki - 2. del: Digitalne aplikacije - Specifikacijska predloga delovanja (IEC 61291-2:2012)
Ta specifikacijska predloga delovanja se uporablja za naprave z enokanalnim optičnim ojačevalnikom (OA), ki se uporabljajo za digitalne aplikacije. Za večkanalne aplikacije se uporablja standard IEC 61291, del 4. Cilj te specifikacijske predloge delovanja je zagotoviti okvir za pripravo podrobnih specifikacij za delovanje naprav z enokanalnim optičnim ojačevalnikom, ki se uporabljajo za digitalne aplikacije. Avtorji podrobne specifikacije lahko dodajo specifikacijske parametre in/ali skupine specifikacijskih parametrov za določene aplikacije. Vendar avtorji podrobnih specifikacij ne smejo odstraniti specifikacijskih parametrov, določenih v tem standardu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61291-2:2012
01-maj-2012
1DGRPHãþD
SIST EN 61291-2:2007
2SWLþQLRMDþHYDOQLNLGHO 'LJLWDOQHDSOLNDFLMH6SHFLILNDFLMVNDSUHGORJD
GHORYDQMD ,(&
Optical amplifiers - Part 2: Digital applications - Performance specification template (IEC
61291-2:2012)
Lichtwellenleiter-Verstärker - Teil 2: Digitale Anwendungen - Vorlage für
Betriebsverhaltensspezifikationen (IEC 61291-2:2012)
Amplificateurs optiques - Partie 2: Applications numériques - Modèles de spécifications
de performances (CEI 61291-2:2012)
Ta slovenski standard je istoveten z: EN 61291-2:2012
ICS:
33.180.30 2SWLþQLRMDþHYDOQLNL Optic amplifiers
SIST EN 61291-2:2012 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61291-2:2012
---------------------- Page: 2 ----------------------
SIST EN 61291-2:2012
EUROPEAN STANDARD
EN 61291-2
NORME EUROPÉENNE
March 2012
EUROPÄISCHE NORM
ICS 33.180.30 Supersedes EN 61291-2:2007
English version
Optical amplifiers -
Part 2: Digital applications -
Performance specification template
(IEC 61291-2:2012)
Amplificateurs optiques - Lichtwellenleiter-Verstärker -
Partie 2: Applications numériques - Teil 2: Digitale Anwendungen -
Modèles de spécifications de Vorlage für
performances Betriebsverhaltensspezifikationen
(CEI 61291-2:2012) (IEC 61291-2:2012)
This European Standard was approved by CENELEC on 2012-02-14. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61291-2:2012 E
---------------------- Page: 3 ----------------------
SIST EN 61291-2:2012
EN 61291-2:2012 - 2 -
Foreword
The text of document 86C/1018/CDV, future edition 3 of IEC 61291-2, prepared by SC 86C, "Fibre optic
systems and active devices", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 61291-2:2012.
The following dates are fixed:
(dop) 2012-11-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-02-14
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61291-2:2007.
EN 61291-2:2012 constitutes a minor update through clarification that the scope is for single channel
optical amplifiers, and that pump leakage parameters do not apply to semiconductor optical amplifiers.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61291-2:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61280 series NOTE Harmonized in EN 61280 series.
---------------------- Page: 4 ----------------------
SIST EN 61291-2:2012
- 3 - EN 61291-2:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60825-1 1993 Safety of laser products - EN 60825-1 1994
Part 1: Equipment classification, requirements + A11 1996
and user's guide
IEC 61290 Series Optical amplifiers - Test methods EN 61290 Series
IEC 61291-1 - Optical amplifiers - EN 61291-1 -
Part 1: Generic specification
IEC 61291-5-2 - Optical amplifiers - EN 61291-5-2 -
Part 5-2: Qualification specifications -
Reliability qualification for optical fibre
amplifiers
IEC Guide 107 - Electromagnetic compatibility - Guide to the - -
drafting of electromagnetic compatibility
publications
1)
EN 60825-1 is superseded by EN 62471:2008, which is based on IEC 62471:2006.
---------------------- Page: 5 ----------------------
SIST EN 61291-2:2012
---------------------- Page: 6 ----------------------
SIST EN 61291-2:2012
IEC 61291-2
®
Edition 3.0 2012-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical amplifiers –
Part 2: Digital applications – Performance specification template
Amplificateurs optiques –
Partie 2: Applications numériques – Modèle de spécifications de performances
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 33.180.30 ISBN 978-2-88912-858-7
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61291-2:2012
– 2 – 61291-2 © IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope and object . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 6
4 Product specification worksheet for power amplifiers . 7
5 Product specification worksheet for pre-amplifiers . 8
6 Product specification worksheet for line amplifiers . 9
7 Electromagnetic compatibility (EMC) requirements . 10
Bibliography . 11
Table 1 – Minimum list of relevant parameters of power amplifiers to be specified for
digital applications . 7
Table 2 – Minimum list of relevant parameters of pre-amplifiers to be specified for
digital applications . 8
Table 3 – Minimum list of relevant parameters of line amplifiers to be specified for
digital applications . 9
---------------------- Page: 8 ----------------------
SIST EN 61291-2:2012
61291-2 © IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL AMPLIFIERS –
Part 2: Digital applications –
Performance specification template
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.