Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)

This part of ISO 26082 specifies a method for determining the resistance of all forms of leather to visible soiling through repeated contact with soiled objects. It provides a physical pretreatment routine for leathers that may be vulnerable to loss of soiling resistance while in service, prior to conducting further tests such as cleaning.

Leder - Physikalische und mechanische Prüfverfahren zur Bestimmung des Anschmutzens - Teil 1: Martindale-Verfahren (ISO 26082-1:2012)

Dieses Verfahren ist dazu vorgesehen, die Beständigkeit aller Arten von Leder gegen ein sichtbares
Anschmutzen durch wiederholten Kontakt mit angeschmutzten Gegenständen zu bestimmen. Für Leder, die
ihre Anschmutzbeständigkeit im Gebrauch verlieren können, enthält das Verfahren Möglichkeiten zur
physikalischen Vorbehandlung vor weiteren Prüfungen, wie dem Reinigen.
Anhang A dient nur der Information.

Cuir - Méthodes d'essai physique et mécanique de détermination de la salissure - Partie 1: Méthode par frottement (Martindale) (ISO 26082-1:2012)

L'ISO 26082-1:2012 spécifie une méthode de détermination de la résistance à la salissure visible de toute forme de cuir par mise en contact répétée avec des objets salissants. Elle prévoit un prétraitement physique pour les cuirs susceptibles de perdre leur résistance à la salissure en cours d'utilisation, avant la réalisation d'autres essais comme le nettoyage.

Usnje - Fizikalno in mehansko preskušanje za ugotavljanje madežev - 1. del: Metoda (Martindale) z brisanjem usnja (ISO 26082-1:2012)

Ta del standarda ISO 26082 določa metodo za ugotavljanje odpornosti vseh oblik usnja proti vidnim madežem s ponavljanjem stika z umazanimi predmeti. Opredeljuje postopek fizične predhodne obdelave usnja, ki bi lahko med uporabo izgubilo odpornost proti madežem, pred nadaljnjimi preskusi, kot je čiščenje.

General Information

Status
Withdrawn
Publication Date
12-Jun-2012
Withdrawal Date
05-May-2019
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-May-2019
Due Date
29-May-2019
Completion Date
06-May-2019

Relations

Buy Standard

Standard
SIST EN ISO 26082-1:2012 - BARVE na pdf strani 16.
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje - Fizikalno in mehansko preskušanje za ugotavljanje madežev - 1. del: Metoda (Martindale) z brisanjem usnja (ISO 26082-1:2012)Leder - Physikalische und mechanische Prüfverfahren zur Bestimmung des Anschmutzens - Teil 1: Martindale-Verfahren (ISO 26082-1:2012)Cuir - Méthodes d'essai physique et mécanique de détermination de la salissure - Partie 1: Méthode par frottement (Martindale) (ISO 26082-1:2012)Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 26082-1:2012SIST EN ISO 26082-1:2012en,fr,de01-september-2012SIST EN ISO 26082-1:2012SLOVENSKI

STANDARDSIST EN ISO 26082:20091DGRPHãþD
SIST EN ISO 26082-1:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 26082-1
March 2012 ICS 59.140.30 Supersedes EN ISO 26082:2007English Version

Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale) method (ISO 26082-1:2012)

Cuir - Méthodes d'essai physique et mécanique de détermination de la salissure - Partie 1: Méthode par frottement (Martindale) (ISO 26082-1:2012)

Leder - Physikalische und mechanische Prüfverfahren zur Bestimmung des Anschmutzens - Teil 1: Martindale-Verfahren (ISO 26082-1:2012) This European Standard was approved by CEN on 14 March 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 26082-1:2012: ESIST EN ISO 26082-1:2012

EN ISO 26082-1:2012 (E) 2 Contents Page Foreword ..............................................................................................................................................................3 SIST EN ISO 26082-1:2012

EN ISO 26082-1:2012 (E) 3 Foreword This document (EN ISO 26082-1:2012) has been prepared by Technical Committee CEN/TC 289 “Leather", the secretariat of which is held by UNI, in collaboration with IULTCS "International Union of Leather Technologists and Chemists Societies". This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 26082:2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN ISO 26082-1:2012

SIST EN ISO 26082-1:2012
Reference numberISO 26082-1:2012(E)IULTCS/IUP 53-1:2012(E)© ISO 2012

INTERNATIONAL STANDARD ISO26082-1IULTCS/IUP53-1First edition2012-03-15Leather — Physical and mechanical test methods for the determination of soiling — Part 1: Rubbing (Martindale) method Cuir — Méthodes d'essai physique et mécanique de détermination de la salissure — Partie 1: Méthode par frottement (Martindale)

SIST EN ISO 26082-1:2012
ISO 26082-1:2012(E) IULTCS/IUP53-1:2012(E)
COPYRIGHT PROTECTED DOCUMENT

ISO 2012 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56  CH-1211 Geneva 20 Tel.

+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2012 – All rights reserved
SIST EN ISO 26082-1:2012

ISO 26082-1:2012(E) IULTCS/IUP 53-1:2012(E) © ISO 2012 – All rights reserved iii Contents Page Foreword ............................................................................................................................................................ iv 1 Scope ...................................................................................................................................................... 1 2 Normative references ............................................................................................................................ 1 3 Principle ................................................................................................................................................. 1 4 Terms and definitions ........................................................................................................................... 2 5 Apparatus and materials....................................................................................................................... 2 6 Sampling and sample preparation ....................................................................................................... 3 7 Pretreatment wearing procedures ....................................................................................................... 3 8 Procedure using a standard soiling cloth ........................................................................................... 3 9 Cleaning after-treatment ....................................................................................................................... 4 10 Test report .............................................................................................................................................. 4 Annex A (informative)

Sources of apparatus and materials ........................................................................... 5 Bibliography ........................................................................................................................................................ 7

SIST EN ISO 26082-1:2012

ISO 26082-1:2012(E) IULTCS/IUP 53-1:2012(E) iv © ISO 2012 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 26082-1 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, in collaboration with the Physical Tests Commission of the International Union of Leather Technologists and Chemists Societies (IUP Commission, IULTCS) in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement). IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further the advancement of leather science and technology. IULTCS has three Commissions, which are responsible for establishing international methods for sampling and the testing of leather. ISO recognizes IULTCS as an international standardizing body for the preparation of test methods for leather. This first edition of ISO 26082-1 cancels and replaces ISO 26082:2007, which has been technically revised. It has a modified title and small changes have been made to 5.3, 5.7 and 6.2. ISO 26082 consists of the following parts, under the general title Leather — Physical and mechanical test methods for the determination of soiling:  Part 1: Rubbing (Martindale) method  Part 2: Tumbling method

SIST EN ISO 26082-1:2012

INTERNATIONAL STANDARD ISO 26082-1:2012(E)IULTCS/IUP 53-1:2012(E) © ISO 2012 – All rights reserved 1 Leather — Physical and mechanical test methods for the determination of soiling — Part 1: Rubbing (Martindale) method 1 Scope This part of ISO 26082 specifies a method for determining the resistance of all forms of leather to visible soiling through repeated contact with soiled objects. It provides a physical pretreatment routine for leathers that may be vulnerable to loss of soiling resistance while in service, prior to conducting further tests such as cleaning. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2418, Leather — Chemical, physical and mechanical and fastness tests — Sampling location ISO 2419, Leather — Physical and mechanical tests — Sample preparation and conditioning ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour ISO 105-A05, Textiles — Tests for colour fastness — Part A05: Instrumental assessment of change in colour for determination of grey scale rating ISO 12947-1, Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus ISO 12945-2, Textiles — Determination of the fabric propensity to surface fuzzing and to pilling — Part 2: Modif

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.