SIST EN 62271-105:2013
(Main)High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV (IEC 62271-105:2012)
High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV (IEC 62271-105:2012)
This part of IEC 62271 applies to three-pole units for public and industrial distribution systems which are functional assemblies of switches including switch-disconnectors and currentlimiting fuses designed so as to be capable of - breaking, at the rated recovery voltage, any current up to and including the rated shortcircuit breaking current; - making, at the rated voltage, circuits to which the rated short-circuit breaking current applies. It does not apply to fuse-circuit-breakers, fuse-contactors, combinations for motor-circuits or to combinations incorporating single capacitor bank switches. In this standard, the word “combination” is used for a combination in which the components constitute a functional assembly. Each association of a given type of switch and a given type of fuse defines one type of combination. In practice, different types of fuses may be combined with one type of switch, which give several combinations with different characteristics, in particular concerning the rated currents. Moreover, for maintenance purposes, the user should know the types of fuses that can be combined to a given switch without impairing compliance to the standard, and the corresponding characteristics of the so-made combination. A switch-fuse combination is then defined by its type designation and a list of selected fuses is defined by the manufacturer, the so-called “reference list of fuses”. Compliance with this standard of a given combination means that every combination using one of the selected fuses is proven to be in compliance with this standard. The fuses are incorporated in order to extend the short-circuit breaking rating of the combination beyond that of the switch alone. They are fitted with strikers in order both to open automatically all three poles of the switch on the operation of a fuse and to achieve a correct operation at values of fault current above the minimum melting current but below the minimum breaking current of the fuses. In addition to the fuse strikers, the combination may be fitted with either an over-current release or a shunt release.
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 105: Wechselstrom-Lastschalter-Sicherungs-Kombinationen für Bemessungsspannungen über 1 kV bis einschließlich 52 kV (IEC 62271-105:2012)
Appareillage à haute tension - Partie 105: Combinés interrupteurs-fusibles pour courant alternatif de tensions assignées supérieures à 1 kV et jusqu'à 52 kV inclus (CEI 62271-105:2012)
La CEI 62271-105:2012 est applicable aux appareils tripolaires utilisés dans les réseaux de distribution publics ou les installations industrielles qui forment des ensembles fonctionnels composés d'interrupteurs ou d'interrupteurs-sectionneurs et de fusibles limiteurs de courant, conçus pour être capable de - couper, à la tension de rétablissement assignée, tous les courants jusqu'au pouvoir de coupure assigné inclus; - établir, à la tension assignée, des circuits pour lesquels le pouvoir de coupure assigné s'applique. Elle ne s'applique ni aux combinés disjoncteurs-fusibles, ni aux contacteurs-fusibles, ni aux combinés destinés à la manoeuvre et à la protection des moteurs ou des batteries de condensateurs. Cette deuxième édition annule et remplace la première édition de la CEI 62271-105, publiée en 2002, et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - la mise en place des figures aux endroits où elles sont citées en premier; - la renumérotation des tableaux; - l'ajout, en partie, de propositions issues du document 17A/852/INF de la CEI; - l'ajout de paragraphes manquants de la CEI 62271-1; - l'introduction du 6.105 'Extension de la validité des essais de type' et en conséquence, suppression des parties correspondantes dans les différents articles existants; - la modification du septième alinéa du 6.101.4, du fait qu'il y a maintenant une définition des NSDD (décharges disruptives non soutenues) donnée au 3.7.4 de la CEI 62271 1:2007. Harmonisation avec la CEI 62271-107; - certains articles référencés dans d'autres normes, comme dans la CEI 60282-1, ont été modifiés, si bien que les éditions indiquées au 1.2 ont été modifiées en consequence; - l'ajout d'une nouvelle Annexe C définissant les tolérances.
Visokonapetostne stikalne in krmilne naprave - 105. del: Kombinacije stikal za izmenični tok z varovalkami za naznačene napetosti nad 1 kV do vključno 52 kV (IEC 62271-105:2012)
Ta del standarda IEC 62271 se uporablja za tripolne enote za javne in industrijske razdelilne sisteme, ki so funkcionalni sestavi stikal ter vključujejo ločilna stikala in tokovno omejilne varovalke, pri čemer lahko – pri naznačeni napetosti prekinejo kakršen koli tok do in vključno z naznačenim kratkostičnim prekinjenim tokom; – pri naznačeni napetosti vzpostavijo tokokroge, v zvezi s katerimi se uporablja naznačeni kratkostični prekinjeni tok. Ne uporablja se za varovalčne odklopnike, varovalčne kontaktorje, kombinacije za motorne tokokroge ali kombinacije enojnih stikal kondenzatorske baterije. V tem standardu se beseda »kombinacija« uporablja za kombinacijo, v kateri deli sestavljajo funkcionalni sestav. Vsaka zveza določene vrste stikala in določene vrste varovalke opredeljuje eno vrsto kombinacije. V praksi se lahko različne vrste varovalk kombinirajo z eno vrsto stikala, pri tem pa nastane več kombinacij z različnimi lastnostmi, zlasti v zvezi z naznačenimi tokovi. Poleg tega mora uporabnik za namene vzdrževanja poznati vrste varovalk, ki se lahko kombinirajo z določenim stikalom tako, da se skladnost s standardom ne zmanjša, in ustrezne lastnosti takšne kombinacije. Kombinacija stikala in varovalke je opredeljena z označbo vrste, seznam izbranih varovalk pa določi proizvajalec v t. i. »referenčnem seznamu varovalk«. Skladnost določene kombinacije s tem standardom pomeni, da je vsaka kombinacija, v kateri je uporabljena izbrana varovalka, dokazano skladna s tem standardom, Varovalke se vgradijo, ker je kombinacija varovalka - stikalo učinkovitejša pri prekinjanju kratkega stika kot pa samo stikalo. Opremljene so s strikerji za samodejno odpiranje vseh treh polov stikala pri delovanju varovalke in za zagotavljanje pravilnega delovanja pri vrednostih okvarnega toka, ki so nad najmanjšim talilnim tokom, vendar pod najmanjšim izklopnim tokom varovalk. Poleg strikerjev varovalk je lahko kombinacija opremljena s sprožnikom nadtoka ali sprožnikom soupora.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2013
1DGRPHãþD
SIST EN 62271-105:2003
9LVRNRQDSHWRVWQHVWLNDOQHLQNUPLOQHQDSUDYHGHO .RPELQDFLMHVWLNDO]D
L]PHQLþQLWRN]YDURYDONDPL]DQD]QDþHQHQDSHWRVWLQDGN9GRYNOMXþQRN9
,(&
High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse
combinations for rated voltages above 1 kV up to and including 52 kV (IEC 62271-
105:2012)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 105: Wechselstrom-Lastschalter
-Sicherungs-Kombinationen für Bemessungsspannungen über 1 kV bis einschließlich 52
kV (IEC 62271-105:2012)
Appareillage à haute tension - Partie 105: Combinés interrupteurs-fusibles pour courant
alternatif de tensions assignées supérieures à 1 kV et jusqu'à 52 kV inclus (CEI 62271-
105:2012)
Ta slovenski standard je istoveten z: EN 62271-105:2012
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62271-105
NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM
ICS 29.130.10 Supersedes EN 62271-105:2003
English version
High-voltage switchgear and controlgear -
Part 105: Alternating current switch-fuse combinations for rated voltages
above 1 kV up to and including 52 kV
(IEC 62271-105:2012)
Appareillage à haute tension - Hochspannungs-Schaltgeräte und -
Partie 105: Combinés interrupteurs- Schaltanlagen -
fusibles pour courant alternatif de tensions Teil 105: Wechselstrom-Lastschalter-
assignées supérieures à 1 kV et jusqu'à Sicherungs-Kombinationen für
52 kV inclus Bemessungsspannungen über 1 kV bis
(CEI 62271-105:2012) einschließlich 52 kV
(IEC 62271-105:2012)
This European Standard was approved by CENELEC on 2012-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62271-105:2012 E
Foreword
The text of document 17A/1013/FDIS, future edition 2 of IEC 62271-105, prepared by SC 17A, "High-
voltage switchgear and controlgear", of IEC TC 17, "Switchgear and controlgear" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-105:2012.
The following dates are fixed:
(dop) 2013-08-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-11-01
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62271-105:2003.
105:2003:
– implementation of figures at the place where they are cited first;
– renumbering of tables;
– addition of some of the proposals from IEC paper 17A/852/INF;
– addition of missing subclauses of EN 62271-1;
– implementation of 6.105 "Extension of validity of type tests" and consequently removing of the relevant
parts in the different existing clauses;
th
– change of 7 paragraph of 6.101.4 as there is now a definition of NSDD given in 3.7.4 of EN 62271-
1:2008. Harmonization with EN 62271-107;
– some referenced clauses in other standards like EN 60282-1 were changed and therefore changed the
editions under 1.2 to the ones referred to;
– addition of a new Annex C defining tolerances.
This standard is to be read in conjunction with EN 62271-1:2008, to which it refers and which is
applicable, unless otherwise specified in this standard. In order to simplify the indication of corresponding
requirements, the same numbering of clauses and subclauses is used as in EN 62271-1. Amendments to
these clauses and subclauses are given under the same numbering, whilst additional subclauses are
numbered from 101.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
- 3 - EN 62271-105:2012
Endorsement notice
The text of the International Standard IEC 62271-105:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 62271-107 NOTE Harmonized as EN 62271-107.
IEC 62271-202 NOTE Harmonized as EN 62271-202.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Annex ZA of EN 62271-1:2008 is applicable with the following additions:
Publication Year Title EN/HD Year
IEC 60282-1 2009 High-voltage fuses - EN 60282-1 2009
Part 1: Current-limiting fuses
IEC/TR 60787 2007 Application guide for the selection of high- - -
voltage current-limiting fuse-links for
transformer circuits
IEC 62271-1 2007 High-voltage switchgear and controlgear - EN 62271-1 2008
Part 1: Common specifications
IEC 62271-100 2008 High-voltage switchgear and controlgear - EN 62271-100 2009
Part 100: Alternating current circuit-breakers
IEC 62271-102 2001 High-voltage switchgear and controlgear - EN 62271-102 2002
+ corr. April 2002 Part 102: Alternating current disconnectors + corr. July 2008
+ corr. February 2005 and earthing switches + corr. March 2005
+ corr. May 2003
IEC 62271-103 2011 High-voltage switchgear and controlgear - EN 62271-103 2011
Part 103: Switches for rated voltages above
1 kV up to and including 52 kV
IEC 62271-105 ®
Edition 2.0 2012-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
High-voltage switchgear and controlgear –
Part 105: Alternating current switch-fuse combinations for rated voltages above
1 kV up to and including 52 kV
Appareillage à haute tension –
Partie 105: Combinés interrupteurs-fusibles pour courant alternatif de tensions
assignées supérieures à 1 kV et jusqu'à 52 kV inclus
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XA
ICS 29.130.10 ISBN 978-2-83220-401-6
– 2 – 62271-105 © IEC:2012
CONTENTS
FOREWORD . 5
1 General . 7
1.1 Scope . 7
1.2 Normative references . 8
2 Normal and special service conditions . 8
3 Terms and definitions . 8
3.1 General terms . 8
3.2 Assemblies of switchgear and controlgear . 8
3.3 Parts of assemblies . 8
3.4 Switching devices . 8
3.5 Parts of switchgear and controlgear . 9
3.6 Operation . 10
3.7 Characteristic quantities . 10
3.101 Fuses . 14
4 Ratings . 15
4.1 Rated voltage (U ) . 15
r
4.2 Rated insulation level . 15
4.3 Rated frequency (f ) . 15
r
4.4 Rated normal current and temperature rise . 15
4.4.1 Rated normal current (I ) . 15
r
4.4.2 Temperature rise . 15
4.5 Rated short-time withstand current (I ) . 15
k
4.6 Rated peak withstand current (I ) . 15
p
4.7 Rated duration of short-circuit (t ) . 15
k
4.8 Rated supply voltage of closing and opening devices and of auxiliary and
control circuits (U ) . 16
a
4.9 Rated supply frequency of closing and opening devices and of auxiliary
circuits . 16
4.10 Rated pressure of compressed gas supply for controlled pressure systems . 16
4.11 Rated filling levels for insulation and/or operation . 16
4.101 Rated short-circuit breaking current . 16
4.102 Rated transient recovery voltage . 16
4.103 Rated short-circuit making current . 16
4.104 Rated transfer current (striker operation) (I ) . 17
rtransfer
4.105 Rated take-over current for release-operated combinations (I ) . 17
to
5 Design and construction . 17
5.1 Requirements for liquids in switch-fuse combinations . 17
5.2 Requirements for gases in switch-fuse combinations . 17
5.3 Earthing of switch-fuse combinations . 17
5.4 Auxiliary and control equipment . 17
5.5 Dependent power operation . 17
5.6 Stored energy operation . 17
5.7 Independent manual or power operation (independent unlatched operation) . 17
5.8 Operation of releases . 17
5.9 Low- and high-pressure interlocking and monitoring devices . 17
5.10 Nameplates . 17
62271-105 © IEC:2012 – 3 –
5.11 Interlocking devices . 18
5.12 Position indication . 18
5.13 Degrees of protection provided by enclosures. 18
5.14 Creepage distan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.