SIST EN 13880-1:2004

Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C

This European Standard describes a method for determining the density of hot applied joint sealants.

Heiß verarbeitbare Fugenmassen - Teil 1: Prüfverfahren zur Bestimmung der Dichte bei 25 °C

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Dichte von heiß verarbeitbaren Fugenmassen.

Produits de scellement de joints appliqués a chaud - Partie 1: Méthode d'essai pour la détermination de la masse volumique a 25 °C

La présente norme spécifie un mode de détermination de la masse volumique ou de la densité des produits de scellement pour joints appliqués a chaud, par déplacement.

Toplo nanosljive tesnilne mase za stike – 1. del: Preskusna metoda za ugotavljanje gostote pri 25 °C

General Information

• Status: Published
• Publication Date: 31-May-2004
• ICS: 91.100.50 - Binders. Sealing materials
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2004
• Due Date: 01-Jun-2004
• Completion Date: 01-Jun-2004
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: EN 13880-1:2003 - Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplo nanosljive tesnilne mase za stike – 1. del: Preskusna metoda za ugotavljanje gostote pri 25 °CHeiß verarbeitbare Fugenmassen - Teil 1: Prüfverfahren zur Bestimmung der Dichte bei 25 °CProduits de scellement de joints appliqués a chaud - Partie 1: Méthode d'essai pour la détermination de la masse volumique a 25 °CHot applied joint sealants - Part 1: Test method for the determination of density at 25 °C93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-1:2003SIST EN 13880-1:2004en01-junij-2004SIST EN 13880-1:2004SLOVENSKI
STANDARD



SIST EN 13880-1:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-1August 2003ICS 93.080.20English versionHot applied joint sealants - Part 1: Test method for thedetermination of density at 25 °CProduits de scellement de joints appliqués à chaud - Partie1: Méthode d'essai pour la détermination de la massevolumique à 25 °CHeiß verarbeitbare Fugenmassen - Teil 1: Prüfverfahrenzur Bestimmung der Dichte bei 25 °CThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-1:2003 ESIST EN 13880-1:2004



EN 13880-1:2003 (E)2ContentspageForeword.31Scope.32Normative references.43Terms and definitions.44Principle.45Apparatus.46Preparation and conditioning of test specimens.47Procedure.58Calculation.59Expression of results.510Precision.510.1Repeatability limit.510.2Reproducibility limit.611Test report.6SIST EN 13880-1:2004



EN 13880-1:2003 (E)3ForewordThis document EN 13880-1:2003 has been prepared by Technical Committee CEN/TC 227 “Road materials”, thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby March 2005.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.This European Standard is one of a series of standards as listed below:EN 13880-1, Hot applied joint sealants — Part 1: Test method for the determination of density at 25 °C.EN 13880-2, Hot applied joint sealants — Part 2: Test method for the determination of cone penetration at 25 °C.EN 13880-3, Hot applied joint sealants — Part 3: Test method for the determination of penetration and recovery(resilience).EN 13880-4, Hot app
...