iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST FprEN IEC 60669-2-3:2024

(Main)

Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)

Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)

IEC 60669-2-3:2024 is available as IEC 60669-2-3:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60669-2-3:2024 applies to time-delay switches (hereinafter referred to as TDS) with a rated voltage not exceeding 440 V AC and a rated current not exceeding 63 A, intended for household and similar fixed electrical installations, either indoors or outdoors, operated by hand and/or by remote control. For the control circuit, the rated control voltage does not exceed 440 V AC or 220 V DC. This fourth edition cancels and replaces the third edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) Revision of the present edition with reference to IEC 60669-1:2017 (Edition 4);
b) Introduction of a revision to Annex E "Additional requirements and tests for switches intended to be used at a temperature lower than −5 °C".

Interrupteurs pour installations électriques fixes domestiques et analogues - Partie 2-3: Exigences particulières - Interrupteurs temporisés (minuteries)

IEC 60669-2-3:2024 est disponible sous forme de IEC 60669-2-3:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 60669-2-3:2024 s'applique aux interrupteurs temporisés (désignés ci-après minuteries) de tension assignée qui ne dépasse pas 440 V en courant alternatif et de courant assigné qui ne dépasse pas 63 A, prévus pour installations électriques fixes domestiques et analogues intérieures ou extérieures, commandés à la main ou à distance. Pour le circuit de commande, la tension de commande assignée ne dépasse pas 440 V en courant alternatif ou 220 V en courant continu. Cette quatrième édition annule et remplace la troisième édition parue en 2006. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) révision de la présente édition avec référence à l'IEC 60669-1:2017 (Édition 4);
b) introduction d'une révision de l'Annexe E "Exigences et essais supplémentaires pour les interrupteurs à utiliser à une température inférieure à −5 °C".

Stikala za gospodinjstva in podobne nepremične električne inštalacije - 2-3. del: Posebne zahteve - Stikala s časovno zakasnitvijo (TDS)

General Information

Status
Not Published
Public Enquiry End Date
30-Jan-2023
ICS
29.120.40 - Switches
Technical Committee
EPR - Electrical accessories
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
05-Dec-2023
Due Date
23-Jan-2024
Completion Date
31-Jan-2024
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
Ref Project
FprEN IEC 60669-2-3:2023 - Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)

Relations

Revised
SIST EN 60669-2-3:2007 - Switches for household and similar fixed electrical installations -- Part 2-3: Particular requirements - Time delay switches (TDS)
Effective Date
01-Mar-2022

Buy Standard

prEN IEC 60669-2-3:2023prEN IEC 60669-2-3:2023
PreviousNext
Draft
prEN IEC 60669-2-3:2023
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60669-2-3:2023
01-januar-2023
Stikala za gospodinjstva in podobne nepremične električne inštalacije - 2-3. del:
Posebne zahteve - Stikala s časovno zakasnitvijo (TDS)
Switches for household and similar fixed electrical installations - Part 2-3: Particular
requirements - Time-delay switches (TDS)
Interrupteurs pour installations électriques fixes domestiques et analogues - Partie 2-3:
Exigences particulières - Interrupteurs temporisés (minuteries)
Ta slovenski standard je istoveten z: prEN IEC 60669-2-3:2022
ICS:
29.120.40 Stikala Switches
oSIST prEN IEC 60669-2-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60669-2-3:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60669-2-3:2023
23B/1431/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60669-2-3 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-11-25 2023-02-17
SUPERSEDES DOCUMENTS:
23B/1380/CD, 23B/1396A/CC

IEC SC 23B : PLUGS, SOCKET-OUTLETS AND SWITCHES
SECRETARIAT: SECRETARY:
Italy Mr Cristiano Masini
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Switches for household and similar fixed electrical installations - Part 2-3: Particular
requirements - Time-delay switches (TDS)

PROPOSED STABILITY DATE: 2030

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60669-2-3:2023
IEC CDV 60669-2-3 © IEC 2022 2 23B/1431/CDV

1 CONTENTS
2 FOREWORD. 3
3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 6
7 4 General requirements . 7
8 5 General notes on tests . 7
9 6 Ratings . 8
10 7 Classification . 8
11 8 Marking . 9
12 9 Checking of dimensions . 10
13 10 Protection against electric shock . 10
14 11 Provision for earthing. 10
15 12 Terminals . 10
16 13 Constructional requirements . 10
17 14 Mechanism . 11
18 15 Resistance to ageing, protection provided by enclosures of switches and
19 resistance to humidity .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60669-2-1:2023/AC:2024(Corrigendum)
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
EN IEC 60669-2-1:2022/AC:2024-01
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60669-2-1:2023(Main)
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices (IEC 60669-2-1:2021)
EN IEC 60669-2-1:2022

This clause of Part 1 is completely replaced by the following:
This part of IEC 60669 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units.
It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons.
This document also applies to electronic remote control switches (RCS) and electronic time delay switches (TDS). Particular requirements are given in Annex FF.
Switches including only passive components such as resistors, capacitors, inductors, positive temperature coefficient (PTC) and negative temperature coefficient (NTC) components, varistors, printed wiring boards and connectors are not considered as electronic control devices.
This document also applies to electronic switches and HBES/BACS switches for the operation of lighting equipment circuits and the control of the brightness of lighting equipment (dimmers) as well as the control of the speed of motors (for example, those used in ventilating fans) and for other purposes (for example, heating controls).
The operation and/or control as mentioned above can be transmitted by an electronic signal via several media, for example, powerline (mains), twisted pair, optical fibre, radio frequency, infrared, etc. and are performed:
- intentionally by a person via an actuating member, a key, a card, etc., via a sensing
surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal;
- by physical means, for example, light, temperature, humidity, time, wind velocity, presence
of people;
- by any other influence.
This document also applies to electronic control devices which include integrated radio receivers and transmitters.
This document covers only those requirements for mounting boxes which are necessary for the tests on the electronic control devices.
Requirements for general purpose mounting boxes are given in the relevant part, if any, of IEC 60670.
This document is not intended to cover devices falling within the scope of IEC 60730 (all parts).
Electronic control devices complying with this document are suitable for use at ambient temperature not normally exceeding 25 °C but occasionally reaching 35 °C with a lower limit of the ambient air temperature of −5 °C.
NOTE 1 For lower temperatures, see Annex E.
Functional safety aspects are not covered by this document. Functional safety requirements are covered by the standards of the controlled devices.
In locations where special conditions prevail, such as in ships, vehicles and the like and in hazardous locations, for example where explosions are liable to occur, special construction and/or additional requirements may be required.
This document is not intended to cover devices which are designed to be incorporated in appliances or are intended to be delivered together with a specific appliance and which are within the scope of IEC 60730 (all parts) or IEC 61058-1.
Examples of designs of electronic switches and HBES/BACS switches and functions are shown in Annex AA.
Additional requirements for electronic control devices using DLT-technology in accordance with IEC 62756-1 are given in Annex CC.
Electrical interface specification for phase-cut dimmer used in phase-cut dimmed lighting systems are given for information only in Annex EE.
NOTE 2 Electronic switches and HBES/BACS switches without a mechanical switch in the main circuit do not provide a "full off-state". Therefore, the circuit on the load side are to be considered to be live.

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60669-2-1:2023/A11:2023(Amendment)
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
EN IEC 60669-2-1:2022/A11:2022

To give requirements and tests for electronic control devices, a general term to cover electronic switches, HBES/BACS switches and electronic extension units.
It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC.
This Part of IEC 60669 also applies to electronic control devices which include integrated radio receivers and transmitters.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61058-2-5:2021(Main)
Switches for appliances - Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:2018)
EN IEC 61058-2-5:2021

This Part of IEC 61058 applies to change-over selectors (mechanical or electronic) for
appliances actuated by hand, by foot or by other human activity, to operate or control
electrical appliances and other equipment for household or similar purposes with a rated
voltage not exceeding 480 V and a rated current not exceeding 63 A.
These change-over selectors are intended to be operated by a person, via an actuating
member or by actuating a sensing unit. The actuating member or sensing unit can be integral
with or arranged separately, either physically or electrically, from the switch, and can involve
transmission of a signal, for example electrical, optical, acoustic or thermal, between the
actuating member or sensing unit and the switch.
Change-over selectors which incorporate additional control functions governed by the switch
function are within the scope of this document.
This document also covers the indirect actuation of the switch when the operation of the
actuating member or sensing unit is provided by a remote control or a part of an appliance or
equipment such as a door.
NOTE 1 Electronic change-over selectors can be combined with mechanical change-over selectors giving full
disconnection or micro-disconnection.
NOTE 2 Electronic change-over selectors without a mechanical switch in the supply circuit provide only electronic
disconnection. Therefore, the circuit on the load side is always considered to be live.
NOTE 3 For change-over selectors used in tropical climates, additional requirements can apply.
NOTE 4 Attention is drawn to the fact that the standards for appliances can contain additional or alternative
requirements for change-over selectors.
NOTE 5 Throughout this document, the word "appliance" means "appliance or equipment".
This document applies to change-over selectors intended to be incorporated in, on, or with an
appliance.
This document also applies to change-over selectors incorporating electronic devices.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61058-2-1:2021(Main)
Switches for appliances - Part 2-1: Particular requirements for cord switches (IEC 61058-2-1:2018)
EN IEC 61058-2-1:2021

This document applies to cord switches (mechanical or electronic) for appliances actuated by
hand, by foot or by other human activity, to operate or control electrical appliances and other
equipment for household or similar purposes with a rated voltage not exceeding 250 V and a
rated current not exceeding 16 A.
Throughout this document, the word "appliance" means "appliance or equipment".
These switches are intended to be operated by a person, via an actuating member or by
actuating a sensing unit. The actuating member or sensing unit can be integral or arranged
separately from the switch. The transmission of a signal between the actuating member or
sensing unit and the switch can be made either physically or electrically (for example,
electrical, optical, acoustic or thermal).
Switches which incorporate additional control functions governed by the switch function are
within the scope of this document.
This document also covers the indirect actuation of the switch when the operation of the
actuating member or sensing unit is provided by a remote control or a part of an appliance
such as a door.
NOTE 1 Electronic switches can be combined with mechanical switches giving full disconnection or
microdisconnection.
NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic
disconnection. Therefore, the circuit on the load side is always considered to be live.
NOTE 3 For switches used in tropical climates, additional requirements can apply.
NOTE 4 Attention is drawn to the fact that the standards for appliances can contain additional or alternative
requirements for switches.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61058-2-4:2021(Main)
Switches for appliances - Part 2-4: Particular requirements for independently mounted switches (IEC 61058-2-4:2018)
EN IEC 61058-2-4:2021

This document applies to independently mounted switches for appliances (mechanical or
electronic) actuated by hand, by foot or by other human activity, to operate or control
electrical appliances and other equipment for household or similar purposes with a rated
voltage not exceeding 480 V and a rated current not exceeding 63 A.
These switches are intended to be operated by a person, via an actuating member or by
actuating a sensing unit. The actuating member or sensing unit can be integral with or
arranged separately, either physically or electrically, from the switch and involve transmission
of a signal, for example, electrical, optical, acoustic or thermal, between the actuating
member or sensing unit and the switch.
Switches which incorporate additional control functions governed by the switch function are
within the scope of this document.
This document also covers the indirect actuation of the switch when the operation of the
actuating member or sensing unit is provided by a remote control or by a part of an appliance
or equipment, such as a door.
NOTE 1 Electronic switches can be combined with mechanical switches giving full disconnection or microdisconnection.
NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electronic
disconnection. Therefore, the circuit on the load side is always considered to be live.
NOTE 3 For switches used in tropical climates, additional requirements can apply.
NOTE 4 Attention is drawn to the fact that the standards for appliances can contain additional or alternative
requirements for switches.
NOTE 5 Throughout this document, the word "appliance" means "appliance or equipment".

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63180:2021(Main)
Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection (IEC 63180:2020)
EN IEC 63180:2020

This document provides a methodology and test procedures to be able to declare and verify
the detection area for motion detectors using passive infrared technology in electronic control
devices and appliance switches, whether stand-alone (direct control of one or more
applications) or as part of home and building electronic systems or building automation
control systems (HBES/BACS) or similar.
It also provides a uniform way to present the test results.
The purpose of these detectors is to detect the major and minor movements of persons.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60669-1:2018/AC:2020(Corrigendum)
Switches for household and similar fixed electrical installations - Part 1: General requirements (IEC 60669-1:2017/COR1:2020)
EN 60669-1:2018/AC:2020-02

TAN - // IEC Corrigendum

  • Corrigendum
    6 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60934:2019(Main)
Circuit-breakers for equipment (CBE) (IEC 60934:2019)
EN IEC 60934:2019

This document is applicable to mechanical switching devices designed as "circuit-breakers for equipment" (CBE) for household and similar applications. CBEs according to this document are intended to provide protection to circuits within electrical equipment including its components (e.g. motors, transformers, internal wiring). This document covers also CBEs applicable for protection of electrical equipment in case of undervoltage and/or overvoltage. This document also covers CBEs which are suitable for isolation. CBEs are not applicable for overcurrent protection of wiring installations of buildings. CBEs according to this document have: - a rated voltage not exceeding 440 V AC (between phases) and/or DC not exceeding 250 V; - a rated current not exceeding 125 A; - a short-circuit capacity (Icn) of at least 6 × In (AC types) and 4 × In (DC types) but not exceeding 3 000 A. CBEs may have a conditional short-circuit current (Inc) rating in association with a specified short-circuit protective device (SCPD). A guide for coordination of a CBE associated in the same circuit with a SCPD is given in Annex F. For CBEs having a degree of protection higher than IP20 according to IEC 60529, for use in locations where hazardous environmental conditions prevail (e.g. excessive humidity, heat or cold or deposition of dust) and in hazardous locations (e.g. where explosions are liable to occur), special constructions may be required. This document contains all the requirements necessary to ensure compliance with the operational characteristics required for these devices by type tests. It also contains the details relative to test requirements and methods of testing necessary to ensure reproducibility of test results. This document states: a) the characteristics of CBEs; b) the conditions with which CBEs shall comply, with reference to: 1) their operation and behaviour in normal service; 2) their operation and behaviour in case of overload; 3) their operation and behaviour in case of short-circuits up to their rated short-circuit capacity; 4) their dielectric properties; c) the tests intended for confirming that these conditions have been met and the methods to be adopted for the tests; d) the data to be marked on the devices; e) the test sequences to be carried out and the number of samples to be submitted for certification purposes (see Annex C); f) the routine tests to be carried out to reveal unacceptable variations in material or manufacture, likely to affect safety (see Annex I).

  • Standard
    122 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61058-1-2:2017/AC:2019(Corrigendum)
Switches for appliances - Part 1-2: Requirements for electronic switches
EN 61058-1-2:2016/AC:2019-02
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day