SIST EN IEC 61058-2-5:2021

Switches for appliances - Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:2018)

This Part of IEC 61058 applies to change-over selectors (mechanical or electronic) for
appliances actuated by hand, by foot or by other human activity, to operate or control
electrical appliances and other equipment for household or similar purposes with a rated
voltage not exceeding 480 V and a rated current not exceeding 63 A.
These change-over selectors are intended to be operated by a person, via an actuating
member or by actuating a sensing unit. The actuating member or sensing unit can be integral
with or arranged separately, either physically or electrically, from the switch, and can involve
transmission of a signal, for example electrical, optical, acoustic or thermal, between the
actuating member or sensing unit and the switch.
Change-over selectors which incorporate additional control functions governed by the switch
function are within the scope of this document.
This document also covers the indirect actuation of the switch when the operation of the
actuating member or sensing unit is provided by a remote control or a part of an appliance or
equipment such as a door.
NOTE 1 Electronic change-over selectors can be combined with mechanical change-over selectors giving full
disconnection or micro-disconnection.
NOTE 2 Electronic change-over selectors without a mechanical switch in the supply circuit provide only electronic
disconnection. Therefore, the circuit on the load side is always considered to be live.
NOTE 3 For change-over selectors used in tropical climates, additional requirements can apply.
NOTE 4 Attention is drawn to the fact that the standards for appliances can contain additional or alternative
requirements for change-over selectors.
NOTE 5 Throughout this document, the word "appliance" means "appliance or equipment".
This document applies to change-over selectors intended to be incorporated in, on, or with an
appliance.
This document also applies to change-over selectors incorporating electronic devices.

Geräteschalter - Teil 2-5: Besondere Anforderungen an Wahlschalter (IEC 61058-2-5:2018)

Interrupteurs pour appareils - Partie 2-5: Règles particulières pour les sélecteurs (IEC 61058-2-5:2018)

IEC 61058-2-5:2018 est disponible sous forme de IEC 61058-2-5:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 61058-2-5:2018 s'applique aux présélecteurs (mécaniques ou électroniques) pour les appareils qui sont manœuvrés par une personne à la main, au pied ou d'une autre façon afin d'actionner ou de commander des appareils électriques et d'autres équipements pour usage domestique et analogue, de tension assignée ne dépassant pas 480 V et de courant assigné ne dépassant pas 63 A. Cette troisième édition annule et remplace la deuxième édition parue en 2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- mise à jour des références pour tenir compte de la nouvelle structure de l'IEC 61058-1;
- modifications concernant la réalisation de l'essai d'échauffement, pour tenir compte des modifications correspondantes apportées à l'IEC 61058-1.

Stikala za aparate - 2-5. del: Posebne zahteve za predizbiralnike (IEC 61058-2-5:2018)

General Information

• Status: Published
• Publication Date: 16-Jun-2021
• ICS: 29.120.40 - Switches
• Technical Committee: EPR - Electrical accessories
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 11-Feb-2021
• Due Date: 18-Apr-2021
• Completion Date: 17-Jun-2021
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Mandate: M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
• Ref Project: EN IEC 61058-2-5:2021 - Switches for appliances - Part 2-5: Particular requirements for change-over selectors

Relations

• Replaces: SIST EN 61058-2-5:2011 - Switches for appliances - Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:2010)
• Effective Date: 09-Feb-2021
• Replaces: SIST EN 61058-2-5:2011 - Switches for appliances - Part 2-5: Particular requirements for change-over selectors (IEC 61058-2-5:2010)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61058-2-5:2021
01-julij-2021
Nadomešča:
SIST EN 61058-2-5:2011
Stikala za aparate - 2-5. del: Posebne zahteve za predizbiralnike (IEC 61058-2-
5:2018)
Switches for appliances - Part 2-5: Particular requirements for change-over selectors
(IEC 61058-2-5:2018)
Geräteschalter - Teil 2-5: Besondere Anforderungen an Wahlschalter (IEC 61058-2-
5:2018)
Interrupteurs pour appareils - Partie 2-5: Règles particulières pour les sélecteurs (IEC
61058-2-5:2018)
Ta slovenski standard je istoveten z: EN IEC 61058-2-5:2021
ICS:
29.120.40 Stikala Switches
SIST EN IEC 61058-2-5:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61058-2-5:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61058-2-5:2021


EUROPEAN STANDARD EN IEC 61058-2-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2021
ICS 29.120.40 Supersedes EN 61058-2-5:2011 and all of its
amendments and corrigenda (if any)
English Version
Switches for appliances - Part 2-5: Particular requirements for
change-over selectors
(IEC 61058-2-5:2018)
Interrupteurs pour appareils - Partie 2-5: Exigences Geräteschalter - Teil 2-5: Besondere Anforderungen an
particulières pour les présélecteurs Wahlschalter
(IEC 61058-2-5:2018) (IEC 61058-2-5:2018)
This European Standard was approved by CENELEC on 2018-12-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61058-2-5:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61058-2-5:2021
EN IEC 61058-2-5:2021 (E)
European foreword
The text of document 23J/447/FDIS, future edition 3 of IEC 61058-2-5, prepared by SC 23J "Switches
for appliances" of IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 61058-2-5:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-08-05
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-02-05
document have to be withdrawn

This document supersedes EN 61058-2-5:2011 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61058-2-5:2018 was approved by CENELEC as a
European Standard without any modification.


2

---------------------- Page: 4 ----------------------
SIST EN IEC 61058-2-5:2021
EN IEC 61058-2-5:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
The Annex ZA of EN IEC 61058-1:2018 applies with the following addition:
Publication Year Title EN/HD Year
IEC 61058-1 2016 Switches for appliances - Part 1: EN IEC 61058-1 2018
General requirements


3

---------------------- Page: 5 ----------------------
SIST EN IEC 61058-2-5:2021

---------------------- Page: 6 ----------------------
SIST EN IEC 61058-2-5:2021



IEC 61058-2-5

®


Edition 3.0 2018-11




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Switches for appliances –

Part 2-5: Particular requirements for change-over selectors




Interrupteurs pour appareils –

Partie 2-5: Exigences particulières pour les présélecteurs
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.120.40 ISBN 978-2-8322-6184-2




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 61058-2-5:2021
– 2 – IEC 61058-2-5:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 6
5 General information on tests . 6
6 Rating. 6
7 Classification . 6
8 Marking and documentation . 7
9 Protection against electric shock . 7
10 Provision for earthing . 7
11 Terminals and terminations . 7
12 Construction . 7
13 Mechanism . 8
14 Protection against ingress of solid foreign objects, ingress of water and humid
conditions . 8
15 Insulation resistance and dielectric strength . 8
16 Heating . 8
17 Endurance . 8
18 Mechanical strength . 9
19 Screws, current-carrying parts and connections . 9
20 Clearances, creepage distances, solid insulation and coatings of rigid printed
board assemblies . 9
21 Fire hazard . 9
22 Resistance to rusting . 9
23 Abnormal operation and fault conditions for switches . 9
24 Components for switches . 9
25 EMC requirements . 10

Table 3 – Switch information and loads placed in groups . 7

---------------------- Page: 8 ----------------------
SIST EN IEC 61058-2-5:2021
IEC 61058-2-5:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SWITCHES FOR APPLIANCES –

Part 2-5: Particular requirements for change-over selectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification
...