SIST EN IEC 60669-2-1:2023/AC:2024 - Switches for household and similar fixed electrical

SLOVENSKI STANDARD
01-oktober-2024
Stikala za gospodinjstva in podobne nepremične električne inštalacije - 2-1. del:
Posebne zahteve - Elektronske kontrolne naprave (IEC 60669-2-1:2021/COR1:2024)
Switches for household and similar fixed electrical installations - Part 2-1: Particular
requirements - Electronic control devices (IEC 60669-2-1:2021/COR1:2024)
Schalter für Haushalt und ähnliche ortsfeste elektrische Installationen - Teil 2-1:
Besondere Anforderungen - Elektronische Schalter (IEC 60669-2-1:2021/COR1:2024)
Interrupteurs pour installations électriques fixes domestiques et analogues - Partie 2-1:
Exigences particulières - Dispositifs de commande électronique (IEC 60669-2-
1:2021/COR1:2024)
Ta slovenski standard je istoveten z: EN IEC 60669-2-1:2022/AC:2024-05
ICS:
29.120.40 Stikala Switches
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME EUROPÉENNE EN IEC 60669-2-
1:2022/AC:2024-05
EUROPÄISCHE NORM
EUROPEAN STANDARD
Mai 2024
ICS 29.120.40
Version française
Interrupteurs pour installations électriques fixes domestiques et
analogues - Partie 2-1: Exigences particulières - Dispositifs de
commande électronique
(IEC 60669-2-1:2021/COR1:2024)
Schalter für Haushalt und ähnliche ortsfeste elektrische Switches for household and similar fixed electrical
Installationen - Teil 2-1: Besondere Anforderungen - installations - Part 2-1: Particular requirements - Electronic
Elektronische Schalter control devices
(IEC 60669-2-1:2021/COR1:2024) (IEC 60669-2-1:2021/COR1:2024)
Ce corrige
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST

SIST EN IEC 60669-2-1:2023/AC:2024(Corrigendum)

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices

EN IEC 60669-2-1:2022/AC:2024-01

Corrigendum
1 page
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60669-2-1:2023(Main)

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices (IEC 60669-2-1:2021)

EN IEC 60669-2-1:2022

This clause of Part 1 is completely replaced by the following:
This part of IEC 60669 applies to electronic control devices, a general term to cover electronic switches, home and building electronic systems (HBES) / building automation and control systems (BACS) switches and electronic extension units.
It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC, such as sensors and push buttons.
This document also applies to electronic remote control switches (RCS) and electronic time delay switches (TDS). Particular requirements are given in Annex FF.
Switches including only passive components such as resistors, capacitors, inductors, positive temperature coefficient (PTC) and negative temperature coefficient (NTC) components, varistors, printed wiring boards and connectors are not considered as electronic control devices.
This document also applies to electronic switches and HBES/BACS switches for the operation of lighting equipment circuits and the control of the brightness of lighting equipment (dimmers) as well as the control of the speed of motors (for example, those used in ventilating fans) and for other purposes (for example, heating controls).
The operation and/or control as mentioned above can be transmitted by an electronic signal via several media, for example, powerline (mains), twisted pair, optical fibre, radio frequency, infrared, etc. and are performed:
- intentionally by a person via an actuating member, a key, a card, etc., via a sensing
surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal;
- by physical means, for example, light, temperature, humidity, time, wind velocity, presence
of people;
- by any other influence.
This document also applies to electronic control devices which include integrated radio receivers and transmitters.
This document covers only those requirements for mounting boxes which are necessary for the tests on the electronic control devices.
Requirements for general purpose mounting boxes are given in the relevant part, if any, of IEC 60670.
This document is not intended to cover devices falling within the scope of IEC 60730 (all parts).
Electronic control devices complying with this document are suitable for use at ambient temperature not normally exceeding 25 °C but occasionally reaching 35 °C with a lower limit of the ambient air temperature of −5 °C.
NOTE 1 For lower temperatures, see Annex E.
Functional safety aspects are not covered by this document. Functional safety requirements are covered by the standards of the controlled devices.
In locations where special conditions prevail, such as in ships, vehicles and the like and in hazardous locations, for example where explosions are liable to occur, special construction and/or additional requirements may be required.
This document is not intended to cover devices which are designed to be incorporated in appliances or are intended to be delivered together with a specific appliance and which are within the scope of IEC 60730 (all parts) or IEC 61058-1.
Examples of designs of electronic switches and HBES/BACS switches and functions are shown in Annex AA.
Additional requirements for electronic control devices using DLT-technology in accordance with IEC 62756-1 are given in Annex CC.
Electrical interface specification for phase-cut dimmer used in phase-cut dimmed lighting systems are given for information only in Annex EE.
NOTE 2 Electronic switches and HBES/BACS switches without a mechanical switch in the main circuit do not provide a "full off-state". Therefore, the circuit on the load side are to be considered to be live.

Standard
139 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 60669-2-1:2023/A11:2023(Amendment)

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices

EN IEC 60669-2-1:2022/A11:2022

To give requirements and tests for electronic control devices, a general term to cover electronic switches, HBES/BACS switches and electronic extension units.
It applies to electronic switches and to HBES/BACS switches, for alternating current (AC) only with a rated switching voltage not exceeding 250 V and a rated current not exceeding 16 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
It also applies to electronic extension units with a rated supply voltage not exceeding 250 V AC and 120 V DC.
This Part of IEC 60669 also applies to electronic control devices which include integrated radio receivers and transmitters.

Amendment
10 pages
English language
sale 10% off
e-Library read for
1 day

SIST

SIST EN IEC 63180:2021(Main)

Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection (IEC 63180:2020)

EN IEC 63180:2020

This document provides a methodology and test procedures to be able to declare and verify
the detection area for motion detectors using passive infrared technology in electronic control
devices and appliance switches, whether stand-alone (direct control of one or more
applications) or as part of home and building electronic systems or building automation
control systems (HBES/BACS) or similar.
It also provides a uniform way to present the test results.
The purpose of these detectors is to detect the major and minor movements of persons.

Standard
31 pages
English language
sale 10% off
e-Library read for
1 day

05-Sep-2019
09-Dec-2020
13.320
29.120.40
97.120
EPR

SIST

SIST EN 60669-2-5:2017(Main)

Switches for household and similar fixed electrical installations - Part 2-5: Switches and related accessories for use in home and building electronic systems (HBES) (IEC 60669-2-5:2013 , modified)

EN 60669-2-5:2016

This part of IEC 60669 applies to HBES switches with a working voltage not exceeding 250 V
a.c. and a rated current up to and including 16 A for household and similar fixed electrical
installations either indoors or outdoors and to associated electronic extension units.
It applies to:
– HBES switches for the operation of lamp circuits and the control of the brightness of lamps
(dimmers) as well as the control of the speed of motors (e.g. those used in ventilating
fans) and for other purposes (e.g. heating installations);
– sensors, actuators, switched-socket-outlets, associated electronic extension units, etc.
In the present standard the word "HBES switch" is applied to describe all kinds of HBES
devices e.g. switches, sensors, actuators, switched-socket-outlets, associated electronic
extension units, etc.
The operation and control are performed:
– intentionally by a person via an actuating member, a key, a card, etc., via a sensing
surface or a sensing unit, by means of touch, proximity, turn, optical, acoustic, thermal;
– by physical means, e.g. light, temperature, humidity, time, wind velocity, presence of
people;
– by any other influence;
and transmitted:
– by an electronic signal via several media, e.g. powerline (mains), twisted pair, optical
fibre, radio frequency, infra-red, etc.
HBES switches complying with this standard are suitable for use at ambient temperatures not
normally exceeding 25 °C, but occasionally reaching 35 °C.
This part of IEC 60669also applies to mounting boxes for HBES switches, with the exception
of those for flush-type HBES switches which are covered by IEC 60670-1.
NOTE 1 In the following country flush mounted boxes are covered by both EN 60670-1 and BS 4662: UK
Functional safety aspects of HBES switches are not covered by this standard. Functional
safety requirements are covered by the standards of the devices which are controlled by the
HBES.
In locations where special conditions prevail, e.g. higher temperature, special constructions
may be required.
NOTE 2 This standard is not intended to cover devices falling within the scope of IEC 60730.
NOTE 3 Within this Part 2-5, for any reference to IEC 60669-2-1 and its Amendment 1:2008, the term “electronic
switches” is replaced by “HBES switches”.
NOTE 4 In the following country, HBES switches complying with this standard are suitable for use at ambient
temperatures not normally exceeding 35 °C, but occasionally reaching 40 °C: CN.