oSIST prEN 17166:2024

Fans - Procedures and methods to determine the energy efficiency for the electrical input power range of 125 W up to 500 kW

This document provides procedures and methods for measuring and/or calculating the energy efficiency and associated characteristics of fans when driven by electric motors. This document deals with the following fan types;
-   axial fan;
-   centrifugal forward curved fan, centrifugal radial bladed fan;
-   centrifugal backward curved fan without housing, including centrifugal backward aerofoil fans;
-   centrifugal backward curved fan with housing, including centrifugal backward aerofoil fans;
-   mixed flow fan;
-   cross flow fan;
-   jet fan.
It provides procedures and methods to evaluate the compliance of the fan efficiency against minimum efficiency requirements.
This document includes stand-alone fans and fans that are integrated in other products. It gives guidance to manufacturers in providing information to surveillance authorities to describe the full extent of the fan by describing boundaries, significant elements and additional parts.
Some units previously identified as fans are now defined as Uni-Directional Ventilation Units. This document explains and shows by way of examples the difference between fans and Uni-Directional Ventilation Units.
This standard does not include:
-   Uni-Directional Ventilation Units;
-   fans that are designed specifically to operate in toxic, highly corrosive or flammable environments or in environments with abrasive substances, see Annex C.

Ventilatoren - Verfahren und Methoden zur Ermittlung der Energieeffizienz für die elektrische Eingangsleistung im Bereich von 125 W bis 500 kW

Dieses Dokument behandelt Verfahren und Methoden für die Messung und/oder Berechnung des Wirkungsgrads und damit verbundener Eigenschaften von elektrisch betriebenen Ventilatoren. Dieses Dokument behandelt die folgenden Ventilatortypen:
-   Axialventilator;
-   vorwärtsgekrümmter Radialventilator, Radialventilator mit Ventilatorflügeln;
-   rückwärtsgekrümmter Radialventilator ohne Gehäuse, einschließlich rückwärtsgekrümmter Hohlprofilschaufelventilatoren;
-   rückwärtsgekrümmter Radialventilator mit Gehäuse, einschließlich rückwärtsgekrümmter Hohlprofilschaufelventilatoren;
-   Halbaxialventilator;
-   Querstromventilator;
-   Strahlventilator.
Es behandelt Verfahren und Methoden zur Bewertung der Entsprechung des Ventilatorwirkungsgrads mit den Anforderungen an den Mindestwirkungsgrad.
Dieses Dokument umfasst eigenständige Ventilatoren und Ventilatoren, die in andere Produkte eingebaut sind. Es gibt den Herstellern eine Anleitung für die Bereitstellung von Informationen für die Überwachungsbehörden, um das gesamte Ausmaß des Ventilators zu beschreiben, indem Grenzen, wesentliche Elemente und zusätzliche Teile beschrieben werden.
Einige Einheiten, die zuvor als Ventilatoren definiert wurden, werden nun als Ein-Richtung-Lüftungsanlagen definiert. Dieses Dokument erläutert und zeigt den Unterschied zwischen Ventilatoren und Ein-Richtung-Lüftungsanlagen anhand von Beispielen.
Diese Norm schließt Folgendes nicht mit ein:
-   Ein-Richtung-Lüftungsanlagen;
-   Ventilatoren, die speziell für den Betrieb in giftigen, stark korrosiven oder brennbaren Umgebungen oder in Umgebungen mit abrasiven Stoffen konstruiert wurden, siehe Anhang C.

Ventilateurs - Procédures et méthodes pour déterminer l'efficacité énergétique pour la gamme de puissance d'entrée électrique de 125 W jusqu'à 500 kW

Le présent document fournit des procédures et des méthodes permettant de mesurer et/ou de calculer le rendement énergétique et les caractéristiques associées des ventilateurs entraînés par des moteurs électriques. Le présent document couvre les types de ventilateurs suivants ;
-   ventilateur hélicoïdes ;
-   ventilateur centrifuge à aubes courbées vers l'avant, ventilateur centrifuge à aubes radiales ;
-   ventilateur centrifuge à aubes courbées vers l’arrière sans enveloppe, y compris les ventilateurs centrifuges à aubes profilées, courbées vers l’arrière ;
-   ventilateur centrifuge à aubes courbées vers l’arrière avec enveloppe, y compris les ventilateurs centrifuges à aubes profilées, courbées vers l’arrière ;
-   ventilateur hélico-centrifuge ;
-   ventilateur tangentiel ;
-   ventilateur accélérateur.
Il fournit des procédures et des méthodes permettant d'évaluer la conformité du rendement du ventilateur aux exigences minimales de rendement.
Le présent document prend en compte les ventilateurs individuels et les ventilateurs intégrés dans d'autres produits. Il donne aux fabricants des lignes directrices pour leur permettre de fournir aux autorités de surveillance des informations décrivant la portée exacte du ventilateur en précisant les limites, les éléments importants et les pièces supplémentaires.
Certaines unités précédemment identifiées comme étant des ventilateurs sont désormais définies comme des unités de ventilation unidirectionnelles. Le présent document explique et démontre au travers d'exemples, la différence entre les ventilateurs et les unités de ventilation unidirectionnelles.
La présente norme n'inclut pas :
-   les unités de ventilation unidirectionnelles ;
-   les ventilateurs conçus spécifiquement pour fonctionner dans des environnements toxiques, hautement corrosifs ou inflammables, ou dans des environnements contenant des substances abrasives, voir l’Annexe C.

Ventilatorji - Postopki in metode za ugotavljanje energijske učinkovitosti za naprave z električno vhodno močjo v območju od 125 W do vključno 500 kW

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Oct-2024
• ICS: 23.120 - Ventilators. Fans. Air-conditioners
• Technical Committee: OGS - Heating for buildings
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 04-Sep-2024
• Due Date: 22-Jan-2025
• Directive: 327/2011 - Commission Regulation (EU) No 327/2011 of 30 March 2011 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for fans driven by motors with an electric input power between 125 W and 500 kW (Text with EEA relevance)
• Mandate: M/500 - Mandate to CEN, CENELEC and ETSI for standardisation in the field of fans driven by motors with an electric input power between 125 W and 500 kW
• Ref Project: prEN 17166 - Fans - Procedures and methods to determine the energy efficiency for the electrical input power range of 125 W up to 500 kW

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2024
Ventilatorji - Postopki in metode za ugotavljanje energijske učinkovitosti za
naprave z električno vhodno močjo v območju od 125 W do vključno 500 kW
Fans - Procedures and methods to determine the energy efficiency for the electrical input
power range of 125 W up to 500 kW
Ventilatoren - Verfahren und Methoden zur Ermittlung der Energieeffizienz für die
elektrische Eingangsleistung im Bereich von 125 W bis 500 kW
Ventilateurs - Procédures et méthodes pour déterminer l'efficacité énergétique pour la
gamme de puissance d'entrée électrique de 125 W jusqu'à 500 kW
Ta slovenski standard je istoveten z: prEN 17166
ICS:
23.120 Zračniki. Vetrniki. Klimatske Ventilators. Fans. Air-
naprave conditioners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2024
ICS 23.120
English Version
Fans - Procedures and methods to determine the energy
efficiency for the electrical input power range of 125 W up
to 500 kW
Ventilateurs - Procédures et méthodes pour Ventilatoren - Verfahren und Methoden zur Ermittlung
déterminer et évaluer l'efficacité énergétique pour la der Energieeffizienz für die elektrische
gamme de puissance d'entrée électrique de 125 W Eingangsleistung im Bereich von 125 W bis 500 kW
jusqu'à 500 kW
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 156.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17166:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 27
4.1 General . 27
4.2 Identify the fan type . 27
4.3 Identify an appropriate measurement category and efficiency category . 28
5 Testing and calculation methods . 28
5.1 General . 28
5.2 Test method . 28
5.3 Significant elements of the fan (boundary conditions) . 29
5.3.1 Significant elements . 29
5.3.2 Boundary . 31
5.3.3 Examples of fan arrangements . 32
5.4 Requirement for testing final assembly fans . 38
5.5 Test method including scaling final assembly and impellers . 38
5.5.1 General . 38
5.5.2 Choice of testing or calculation method . 39
5.6 Calculation method not final assembly . 41
5.6.1 General . 41
5.6.2 Components of a fan driven by a motor . 41
5.7 Use of variable speed drive (VSD) . 42
5.8 Test information . 42
5.8.1 General . 42
5.8.2 Fan performance information . 43
5.8.3 Jet fan performance information . 43
5.9 Information declaration . 44
5.9.1 General . 44
5.9.2 Final assembly fans . 44
5.9.3 Not final assembly fans . 44
5.9.4 Jet fans . 44
6 Evaluation of conformity . 44
6.1 Introduction . 44
6.2 Method of comparison between efficiency grades . 45
6.3 Method of comparison between efficiency values . 45
7 Classification and designation . 45
7.1 General . 45
Annex A (informative) Explanatory notes on fans integrated in other energy related
products . 46
A.1 Integrated fans . 46
A.2 Identify the significant elements of the fan . 46
A.3 Facsimile of the fan . 49
A.4 Examples of Uni-directional Ventilation Units (UVU) . 50
Annex B (informative) Method to determine not-final-assembly efficiency flow chart . 53
Annex C (informative) Toxic, highly corrosive, flammable, abrasive substances . 54
C.1 Arduous environments . 54
C.2 Toxic . 54
C.3 Highly corrosive . 54
C.4 Flammable . 54
C.5 Abrasive . 55
Annex D (informative) Guide to using the standard . 56
Annex E (informative) Significant elements of a fan . 58
Annex F (informative) Suggested format for compliance reports requested by market
surveillance authorities . 59
Annex G (informative) Basic fan types with cross reference to Regulation 327/2011 . 62
Annex H (informative) Product information requirements . 63
Annex I (informative) Installation and maintenance information . 65
Annex ZA (informative) Relationship between this European Standard and the ecodesign
requirements of Commission Regulation (EU) No 327/2011 [OJEU L 90/8] aimed to
be covered . 66
Bibliography . 68
European foreword
This document (prEN 17166:2024) has been prepared by Technical Committee CEN/TC 156 “Ventilation
for buildings”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
1 Scope
This document provides procedures and methods for measuring and/or calculating the energy efficiency
and associated characteristics of fans when driven by electric motors. This document deals with the
following fan types;
— axial fan;
— centrifugal forward curved fan, centrifugal radial bladed fan;
— centrifugal backward curved fan without housing, including centrifugal backward aerofoil fans;
— centrifugal backward curved fan with housing, including centrifugal backward aerofoil fans;
— mixed flow fan;
— cross flow fan;
— jet fan.
It provides procedures and methods to evaluate the compliance of the fan efficiency against minimum
efficiency requirements.
This document includes stand-alone fans and fans that are integrated in other products. It gives guidance
to manufacturers in providing information to surveillance authorities to describe the full extent of the fan
by describing boundaries, significant elements and additional parts.
Some units previously identified as fans are now defined as Uni-Directional Ventilation Units. This
document explains and shows by way of examples the difference between fans and Uni-Directional
Ventilation Units.
This standard does not include:
— Uni-Directional Ventilation Units;
— fans that
...