SIST EN 60512-2-3:2003

Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

Defines a standard test method to determine the variation of contact resistance of electromechanical components (essentially connectors) under specified dynamic conditions.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 2-3: Prüfungen des elektrischen Durchgangs und Durchgangswiderstands - Prüfung 2c: Schwankung des Durchgangswiderstands

Connecteurs pour équipements électroniques - Essais et mesures -- Partie 2-3: Essais de continuité électrique et de résistance de contact - Essai 2c: Variation de la résistance de contact

Définit une méthode d'essai normalisée pour déterminer la variation de la résistance de contact des composants électromécaniques (essentiellement des connecteurs), dans des conditions dynamiques prescrites.

Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation (IEC 60512-2-3:2002)

General Information

• Status: Published
• Publication Date: 30-Sep-2003
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2003
• Due Date: 01-Oct-2003
• Completion Date: 01-Oct-2003
• Ref Project: EN 60512-2-3:2002 - Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

Standards Content (Sample)

SLOVENSKI SIST EN 60512-2-3:2003

STANDARD
oktober 2003
Connectors for electronic equipment - Tests and measurements - Part 2-3:
Electrical continuity and contact resistance tests - Test 2c: Contact resistance
variation (IEC 60512-2-3:2002)
ICS 31.220.10 Referenčna številka
SIST EN 60512-2-3:2003(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 60512-2-3
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2002
ICS 31.220.10
English version
Connectors for electronic equipment –
Tests and measurements
Part 2-3: Electrical continuity and contact resistance tests –
Test 2c: Contact resistance variation
(IEC 60512-2-3:2002)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques – Einrichtungen –
Essais et mesures Mess- und Prüfverfahren
Partie 2-3: Essais de continuité électrique Teil 2-3: Prüfungen des elektrischen
et de résistance de contact – Durchgangs und Durchgangswiderstands -
Essai 2c: Variation de la résistance Prüfung 2c: Schwankung des
de contact Durchgangswiderstands
(CEI 60512-2-3:2002) (IEC 60512-2-3:2002)
This European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-2-3:2002 E

---------------------- Page: 2 ----------------------

EN 60512-2-3:2002 - 2 -
Foreword
The text of document 48B/1131/FDIS, future edition 1 of IEC 60512-2-3, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-2-3 on 2002-04-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2003-01-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-04-01
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-2-3:2002 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60512-2-3:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60512-2-1 - Connectors for electronic equipment - EN 60512-2-1 2002
Tests and measurements
Part 2-1: Electrical continuity and
contact resistance tests - Test 2a:
Contact resistance - Millivolt level
method

1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE IEC
60512-2-3
INTERNATIONAL
Première édition
STANDARD
First edition
2002-02
Connecteurs pour équipements électroniques –
Essais et mesures –
Partie 2-3:
Essais de continuité électrique et
de résistance de contact –
Essai 2c: Variation de la résistance
de contact
Connectors for electronic equipment –
Tests and measurements –
Part 2-3:
Electrical continuity and contact
resistance tests –
Test 2c: Contact resistance variation
 IEC 2002 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail]  Web: www.iec.ch
CODE PRIX
D
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60512-2-3  IEC:2002 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –
Part 2-3: Electrical
...