SIST EN 60512-12-3:2006

Connectors for electronic equipment - Tests and measurements -- Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of IEC technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this part of IEC 60512 is to define a standard test method to assess the ability of the terminations of a connector to remain covered with solder when being brought into contact with molten solder under specified conditions.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 12-3: Prüfungen der Lötbarkeit - Prüfung 12c: Lötbarkeit, Entnetzung

Connecteurs pour équipements électroniques - Essais et mesures -- Partie 12-3: Tests de soudure - Essai 12c: Soudabilité, démouillage

Définit une méthode d'essai normalisée pour évaluer la capacité des terminaisons d'un connecteur à demeurer recouvertes de brasure lorsqu'on les met en contact avec une brasure fondue dans des conditions spécifiées.

Konektorji za elektronsko opremo – Preskusi in meritve – 12-3. del: Spajkalni preskusi – Preskus 12c: Spajkljivost, sušenje (IEC 60512-12-3:2006)

General Information

• Status: Published
• Publication Date: 30-Jun-2006
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2006
• Due Date: 01-Jul-2006
• Completion Date: 01-Jul-2006
• Ref Project: EN 60512-12-3:2006 - Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Standards Content (Sample)

SIST EN 60512-12-3:2006SLOVENSKIjulij 2006
STANDARDKonektorji za elektronsko opremo – Preskusi in meritve – 12-3. del: Spajkalni preskusi – Preskus 12c: Spajkljivost, sušenje (IEC 60512-12-3:2006)Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60512-12-3:2006(en)ICS31.220.10







EUROPEAN STANDARD EN 60512-12-3 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2006
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-12-3:2006 E
ICS 31.220.10
English version
Connectors for electronic equipment -
Tests and measurements Part 12-3: Soldering tests -
Test 12c: Solderability, de-wetting (IEC 60512-12-3:2006)
Connecteurs pour équipements électroniques -
Essais et mesures Partie 12-3: Tests de soudure -
Essai 12c: Soudabilité, démouillage (CEI 60512-12-3:2006)
Steckverbinder für elektronische Einrichtungen -
Mess- und Prüfverfahren Teil 12-3: Prüfungen der Lötbarkeit - Prüfung 12c: Lötbarkeit, Entnetzung (IEC 60512-12-3:2006)
This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 60512-12-3:2006
- 2 - Foreword The text of document 48B/1578/FDIS, future edition 1 of IEC 60512-12-3, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-12-3 on 2006-03-01. This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100 which explains the structure of the EN 60512 series.
The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2006-12-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2009-03-01 This European Standard makes reference to International Standards. Where the International Standard referred to has been endorsed as a European Standard or a home-grown European Standard exists, this European Standard shall be applied instead. Pertinent information can be found on the CENELEC web site. __________ Endorsement notice The text of the International Standard IEC 60512-12-3:2006 was approved by CENELEC as a European Standard without any modification. __________



NORME INTERNATIONALECEIIEC INTERNATIONAL STANDARD 60512-12-3Première éditionFirst edition2006-02 Connecteurs pour équipements électroniques – Essais et mesures – Partie 12-3: Essais de soudure – Essai 12c: Soudabilité, démouillage
Connectors for electronic equipment – Tests and measurements – Part 12-3: Soldering tests – Test 12c: Solderability, de-wetting
Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2006
Droits de reproduction réservés

Copyright - all rights reserved Aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: [phone] Telefax: [phone] E-mail: [e-mail]
Web: www.iec.ch CODE PRIX PRICE CODE E Commission Electrotechnique InternationaleInternational Electrotechnical Commission



60512-12-3  IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
CONNECTORS FOR ELECTRONIC EQUIPMENT – TESTS AND MEASUREMENTS –
Part 12-3: Soldering tests –
Test 12c: Solderability, de-wetting
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any e
...