SIST EN 301 435-2:2000

• Abstract:

  This Harmonized Standard specifies the technical characteristics to be provided by TETRA terminal equipment which is capable of connection to a Public Telecommunications Network (PTN) and which uses the TETRA technology. The objective of this Harmonized Standard is to ensure that no disturbance occurs to the PTN, and to ensure interworking btw. PTN and TETRA terminals and btw. TETRA terminal to TETRA terminal so that the communication can be routed successfully through the applicable network(s). The requirements in this Harmonized Standard apply together with the attachment requirements for the appropriate PTN and the requirement of any other applicable Harmonized Standard . It does not add or reduce the attachment requirements unless there is a particular effect on the network which is unique to TETRA. Note: appropriate PTN refers to Harmonized Standard for basic rate ISDN, Harmonized Standard for primary rate ISDN or national regulations (implemeting ETS 300 001) for PSTN. TETRA terminal equipment consists of several elements. This Harmonized Standard is structured to allow testing and approval of the individual elements as separate items. Because of the need for effective use of the radio frequency spectrum, the essential air interface characteristics shall be tested. For each essential requirement, a test is given including measurement methods. Requirements apply to the public network interface and the RF Air Interface of the equipment, which may be stimulated to perform the tests by additional equipment, if necessary. Terminal equipment may be subject to additional requirements in other applicable CTRs or Directives depending on the functionality (primary functions). This Harmonized Standard is based on the radio and protocol provisions of ETS 300 394. This document is a general Harmonized Standard for TETRA terminal equipment, however, only certain applications are subject to Directive 91/263/EEC and hence covered by a CTR. It is therefore necessary to check

• Status: Published
• Publication Date: 31-Oct-2000
• ICS: 33.070.10 - Terrestrial Trunked Radio (TETRA)
• Technical Committee: RES - Radio equipment and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2000
• Due Date: 01-Nov-2000
• Completion Date: 01-Nov-2000
• Mandate: T-314
• Ref Project: ETSI EN 301 435-2 V1.2.1 (2000-12) - Terrestrial Trunked Radio (TETRA); Attachment requirements for TETRA terminal equipment; Part 2: Emergency access

Overview

SIST EN 301 435-2:2000 is a harmonized European standard developed by SIST, aligning with ETSI EN 301 435-2 Version 1.2.4. The standard specifies the essential technical characteristics for Terrestrial Trunked Radio (TETRA) terminal equipment, with a particular focus on requirements for emergency access. It applies to TETRA terminal devices connecting to Public Telecommunications Networks (PTN) and ensures seamless interworking between TETRA terminals, networks, and the PTN. This standard covers requirements for both the network interface and the radio frequency (RF) air interface, addressing interoperability and spectrum efficiency crucial for public safety communications.

Key Topics

• TETRA Technology: Outlines mandatory attachment and interface requirements for equipment utilizing the TETRA platform.
• Emergency Access: Ensures TETRA terminals support rapid and prioritized communication in emergency situations without disturbing the PTN.
• Interworking: Defines the necessary conditions for reliable communication between TETRA terminals, and between terminals and other networked emergency services.
• Network and Air Interface Compliance: Sets out requirements for both PTN attachments (ISDN, PSTN, etc.) and the RF air interface used by TETRA terminals.
• Spectrum Efficiency: Includes requirements designed to protect the integrity of the radio spectrum and avoid harmful interference.
• Testing and Approval: Provides for independent testing and approval of individual terminal elements, including details on measurement methods and test specifications.

Applications

The practical application of SIST EN 301 435-2:2000 centers on ensuring that TETRA terminal equipment is safe and effective for use in critical communications-particularly those involving police, emergency medical, fire, and other public safety services. Key areas of application include:

• Public Safety Networks: Guaranteeing dependable emergency access for first responders over harmonized frequency bands.
• Integrated Communications: Enabling secure, interoperable connections between TETRA devices and public networks ensuring calls can be routed efficiently in critical situations.
• Equipment Certification: Assisting manufacturers in certifying TETRA terminals for PTN connectivity according to European directives and national regulations.
• Quality Assurance: Providing guidelines for test laboratories to assess compliance, focusing on the essential air interface and network attachment requirements.

Related Standards

SIST EN 301 435-2:2000 references a range of related European and international standards to ensure comprehensive coverage of TETRA terminal requirements and interoperability. Significant related standards include:

• EN 301 435-1: General attachment requirements for TETRA terminal equipment.
• ETS 300 394: Conformance testing specifications for TETRA radios, radio and protocol.
• ETS 300 392 (Parts 2, 7, 10-12, 14): Technical requirements for TETRA voice plus data, security, and supplementary services.
• ETS 300 396 (Parts 2, 3, 4, 5, 6, 7, 8): Technical requirements and protocol specifications for Direct Mode Operation (DMO) in TETRA.
• Directive 91/263/EEC and 98/13/EC: European directives affecting telecommunications terminal equipment certification.

By following and implementing SIST EN 301 435-2:2000, manufacturers and operators can ensure their TETRA terminal equipment meets critical operational, safety, and interoperability needs for emergency communication scenarios within European and international public safety networks. For further technical guidance or compliance assessment, consult the referenced standards and applicable national regulations.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prizemni snopovni radio (TETRA) - Dodatne zahteve za terminalsko opremo TETRA - 2. del: Dostop v siliTerrestrial Trunked Radio (TETRA); Attachment requirements for TETRA terminal equipment; Part 2: Emergency access33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 301 435-2 Version 1.2.4SIST EN 301 435-2:2000en01-november-2000SIST EN 301 435-2:2000SLOVENSKI
STANDARD
ETSIEN301435-2V1.2.4(2000-12)CandidateHarmonizedEuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);AttachmentrequirementsforTETRAterminalequipment;Part2:EmergencyaccessSIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)2ReferenceREN/TETRA-02028-2AKeywordsTETRA,radio,regulationETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)3ContentsIntellectualPropertyRights.7Foreword.71Scope.82References.83Definitions,symbolsandabbreviations.113.1Definitions.113.2Symbols.133.3Abbreviations.134Requirements.164.1Environmentalprofile.164.2RequirementsattheUmairinterface.174.2.1Physicallayerrequirements.174.2.2Layer2requirements.214.2.3Layer3requirements.274.2.4Securityrequirements.354.2.5OtherentitiesattheUmairinterface.384.3RequirementsattheUdairinterface.394.3.1Mobilestationairinterfaceprotocol.394.3.1.1Physicallayerrequirements.394.3.1.2Layer2requirements.424.3.1.3Layer3requirements.474.3.1.4Securityrequirements.514.3.2Repeatertype1airinterfaceprotocol.524.3.2.1Physicallayerrequirements.524.3.2.2Layer2requirements.544.3.3Repeatertype2airinterfaceprotocol.564.3.3.1Physicallayerrequirements.564.3.3.2Layer2requirements.584.3.4Gatewayairinterfaceprotocol.604.3.4.1Physicallayerrequirements.604.3.4.2Layer2requirements.624.3.4.3Layer3requirements.644.4Otherinterfaces.655Testspecification.665.1Introduction.665.2Environmentalconditions.675.3Testconfiguration.675.4Umairinterfacetestspecification.675.4.1Physicallayertestspecification.675.4.1.1Testcaseindexforphysicallayer.675.4.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.715.4.2Layer2testspecification.725.4.2.1TestsuitestructureforMAClayer.725.4.2.2TestcaseindexforMAClayer.725.4.2.3TestcaseselectionexpressiondefinitionsforMAClayer.735.4.2.4TestsuiteparameterdefinitionsforMAClayer.735.4.2.5TestsuitestructureforLLClayer.745.4.2.6TestcaseindexforLLClayer.755.4.2.7TestcaseselectionexpressiondefinitionsforLLClayer.755.4.2.8TestsuiteparameterdefinitionsforLLClayer.765.4.3Layer3testspecification.775.4.3.1Testsuitestructureforlayer3.775.4.3.2Testcaseindexforlayer3.80SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)45.4.3.3Testcaseselectionexpressiondefinitionsforlayer3.845.4.3.4Testsuiteparameterdefinitionsforlayer3.855.4.4Securitytestspecification.875.4.4.1TestsuitestructureforUmsecurity.875.4.4.2TestcaseindexforUmsecurity.885.4.4.3TestcaseselectionexpressiondefinitionsforUmsecurity.895.4.4.4TestsuiteparameterdefinitionsforUmsecurity.905.5Udairinterfacetestspecification.915.5.1DMOMobileStationtestspecification.915.5.1.1Physicallayertestspecification.915.5.1.1.1Testcaseindexforphysicallayer.915.5.1.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.935.5.1.2Layer2testspecification.935.5.1.2.1Layer2testspecificationforMobileStation.935.5.1.2.1.1Testsuitestructureforlayer2.935.5.1.2.1.2Testcaseindexforlayer2.935.5.1.2.1.3Testcaseselectionexpressiondefinitionsforlayer2.945.5.1.2.1.4Testsuiteparameterdefinitionsforlayer2.945.5.1.2.2Layer2testspecificationforoperationwithRepeatertype1.955.5.1.2.2.1Testsuitestructureforlayer2foroperationwithRepeatertype1.955.5.1.2.2.2Testcaseindexforlayer2foroperationwithRepeatertype1.955.5.1.2.2.3Testcaseselectionexpressiondefinitionsforlayer2foroperationwithRepeatertype1.965.5.1.2.2.4Testsuiteparameterdefinitionsforlayer2foroperationwithRepeatertype1.975.5.1.2.3Layer2testspecificationforoperationwithRepeatertype2.985.5.1.2.3.1Testsuitestructureforlayer2foroperationwithRepeatertype2.985.5.1.2.3.2Testcaseindexforlayer2foroperationwithRepeatertype2.985.5.1.2.3.3Testcaseselectionexpressiondefinitionsforlayer2foroperationwithRepeatertype2.995.5.1.2.3.4Testsuiteparameterdefinitionsforlayer2foroperationwithRepeatertype2.1005.5.1.2.4Layer2testspecificationforoperationwithGateway.1015.5.1.2.4.1Testsuitestructureforlayer2foroperationwithGateway.1015.5.1.2.4.2Testcaseindexforlayer2foroperationwithGateway.1015.5.1.2.4.3Testcaseselectionexpressiondefinitionsforlayer2foroperationwithGateway.1015.5.1.2.4.4Testsuiteparameterdefinitionsforlayer2foroperationwithGateway.1025.5.1.3Layer3testspecification.1035.5.1.3.1Layer3testspecificationforMobileStation.1035.5.1.3.1.1Testsuitestructureforlayer3.1035.5.1.3.1.3Testcaseselectionexpressiondefinitionsforlayer3.1055.5.1.3.1.4Testsuiteparameterdefinitionsforlayer3.1065.5.1.3.2Layer3testspecificationforoperationwithRepeatertype1.1085.5.1.3.2.1Testsuitestructureforlayer3foroperationwithRepeatertype1.1085.5.1.3.2.2Testcaseindexforlayer3foroperationwithRepeatertype1.1085.5.1.3.2.3Testcaseselectionexpressiondefinitionsforlayer3foroperationwithRepeatertype1.1085.5.1.3.2.4Testsuiteparameterdefinitionsforlayer3foroperationwithRepeatertype1.1095.5.1.3.3Layer3testspecificationforoperationwithRepeatertype2.1095.5.1.3.3.1Testsuitestructureforlayer3foroperationwithRepeatertype2.1095.5.1.3.3.2Testcaseindexforlayer3foroperationwithRepeatertype2.1095.5.1.3.3.3Testcaseselectionexpressiondefinitionsforlayer3foroperationwithRepeatertype2.1105.5.1.3.3.4Testsuiteparameterdefinitionsforlayer3foroperationwithRepeatertype2.1105.5.1.3.4Layer3testspecificationforoperationwithGateway.1115.5.1.3.4.1Testsuitestructureforlayer3foroperationwithGateway.1115.5.1.3.4.2Testcaseindexforlayer3foroperationwithGateway.1125.5.1.3.4.3Testcaseselectionexpressiondefinitionsforlayer3foroperationwithGateway.1125.5.1.3.4.4Testsuiteparameterdefinitionsforlayer3foroperationwithGateway.1135.5.1.4Securitytestspecification.1145.5.1.4.1TestsuitestructureforUdsecurity.1145.5.1.4.2TestcaseindexforUdsecurity.1145.5.1.4.3TestcaseselectionexpressiondefinitionsforUdsecurity.1155.5.1.4.4TestsuiteparameterdefinitionsforUdsecurity.1155.5.2DMORepeatertype1testspecification.1165.5.2.1Physicallayertestspecification.1165.5.2.1.1Testcaseindexforphysicallayer.1165.5.1.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.117SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)55.5.2.2Layer2testspecification.1185.5.2.2.1Testsuitestructureforlayer2forRepeatertype1.1185.5.2.2.2Testcaseindexforlayer2forRepeatertype1.1185.5.2.2.3Testcaseselectionexpressiondefinitionsforlayer2forRepeatertype1.1185.5.2.2.4Testsuiteparameterdefinitionsforlayer2forRepeatertype1.1195.5.3DMORepeatertype2testspecification.1205.5.3.1Physicallayertestspecification.1205.5.3.1.1Testcaseindexforphysicallayer.1205.5.3.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.1215.5.3.2Layer2testspecification.1225.5.3.2.1Testsuitestructureforlayer2forRepeatertype2.1225.5.3.2.2Testcaseindexforlayer2forRepeatertype2.1225.5.3.2.3Testcaseselectionexpressiondefinitionsforlayer2forRepeatertype2.1235.5.3.2.4Testsuiteparameterdefinitionsforlayer2forRepeatertype2.1235.5.4DMOGatewaytestspecification.1245.5.4.1Physicallayertestspecification.1245.5.4.1.1Testcaseindexforphysicallayer.1245.5.4.1.2Testcaseselectionexpressiondefinitionsforphysicallayer.124AnnexA(normative):RequirementsTables(RT).125A.1Introduction.125A.2Typeofairinterface.126A.3RequirementstablesforUmairinterface.126A.3.1General.126A.3.2Physicallayer.128A.3.3Layer2.130A.3.3.1LowerMAClayer.130A.3.3.2UpperMAClayer.131A.3.3.3LLClayer.134A.3.4Layer3.136A.3.4.1CMCErequirements.136A.3.4.1.1CMCErequirementsforanon-Gateway.136A.3.4.1.2CMCErequirementsforaGateway.139A.3.4.2MMrequirements.141A.3.4.2.1MMrequirementsforanon-Gateway.141A.3.4.2.2MMrequirementsforaGateway.143A.3.4.3MLErequirements.144A.3.5Security.145A.3.5.1Authentication.145A.3.5.2OTARprotocolfunctions.147A.3.5.3Secureenable/disable.148A.3.5.4AIencryptionprocedures.149A.4RequirementstablesforUdairinterface.150A.4.1GeneralforDMOequipment.150A.4.2DMOcapableMobileStation(DM-MS).150A.4.2.1GeneralforDMOcapableMobileStation.150A.4.2.1.1GeneralforMobileStationoperationwithDMOType1Repeater(MS-REP1).153A.4.2.1.2GeneralforMobileStationoperationwithDMOType2Repeater(MS-REP2).154A.4.2.1.3GeneralforMobileStationoperationwithDMOGateway(MS-GW).155A.4.2.2Physicallayer.156A.4.2.2.1Layer1foroperationwithDMOType1Repeater(MS-REP1).158A.4.2.2.2Layer1foroperationwithDMOType2Repeater(MS-REP2).158A.4.2.2.3Layer1foroperationwithDMOGateway(MS-GW).158A.4.2.3Layer2.158A.4.2.3.1LowerMAClayer.158A.4.2.3.2UpperMAClayer.159A.4.2.3.2.1UpperMAClayerforoperationwithDMOType1Repeater(MS-REP1).160A.4.2.3.2.2UpperMAClayerforoperationwithDMOType2Repeater(MS-REP2).161A.4.2.3.2.3UpperMAClayerforoperationwithDMOGateway(MS-GW).162SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)6A.4.2.4Layer3.163A.4.2.4.1DMCC.163A.4.2.4.1.1DMCCforoperationwithDMOGateway(MS-GW).167A.4.2.4.2DMMM.168A.4.2.4.2.1DMMMforoperationwithDMOGateway(MS-GW).168A.4.2.5Security.169A.4.2.5.1Airinterfaceencryption.169A.4.2.5.2OTARinDMO.169A.4.2.5.3Secureenable/disableinDMO.171A.4.3DMORepeaterType1(DM-REP1).171A.4.3.1GeneralforDMORepeaterType1(DM-REP1).171A.4.3.2PhysicallayerforDMORepeaterType1(DM-REP1).172A.4.3.3Layer2forDMORepeaterType1(DM-REP1).174A.4.3.3.1LowerMAClayerforDMORepeaterType1(DM-REP1).174A.4.3.3.2UpperMAClayerforDMORepeaterType1(DM-REP1).174A.4.4DMORepeaterType2(DM-REP2).176A.4.4.1GeneralforDMORepeaterType2(DM-REP2).176A.4.4.2PhysicallayerforDMORepeaterType2(DM-REP2).176A.4.4.3Layer2forDMORepeaterType2(DM-REP2).178A.4.4.3.1LowerMAClayerforDMORepeaterType2(DM-REP2).178A.4.4.3.2UpperMAClayerforDMORepeaterType2(DM-REP2).178A.4.5DMOGateway(DM-GATE).180A.4.5.1GeneralforDMOGateway(DM-GATE).180A.4.5.2PhysicallayerforDMOGateway(DM-GATE).180A.4.5.3Layer2forDMOGateway(DM-GATE).182A.4.5.3.1LowerMAClayerforDMOGateway(DM-GATE).182A.4.5.3.2UpperMAClayerforDMOGateway(DM-GATE).182A.4.5.4Layer3forDMOGateway(DM-GATE).183AnnexB(normative):Declarationsonparameterssupported.185B.1Introduction.185B.2DeclarationsforUmairinterface.185B.2.1Layer1.185B.2.2Layer2.185B.2.2.1MAClayer.185B.2.3Layer3.186B.2.3.1CMCE.186B.2.3.2MM.186B.2.3.3MLE.187B.2.4Security.187B.3DeclarationsforUdairinterface.188B.3.1Layer1.188B.3.2Layer2.189B.3.2.1MobileStationoperation.189B.3.2.2MobileStationoperationwithRepeatertype1.189B.3.2.3MobileStationoperationwithRepeatertype2.190B.3.2.4MobileStationoperationwithGateway.191B.3.2.5Repeatertype1.192B.3.2.6Repeatertype2.192B.3.3Layer3.193B.3.3.1MobileStationoperation.193B.3.3.2MobileStationoperationwithRepeatertype1.194B.3.3.3MobileStationoperationwithRepeatertype2.195B.3.3.4MobileStationoperationwithGateway.195B.3.4Security.196Bibliography.197History.198SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)7IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisCandidateHarmonizedEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectTerrestrialTrunkedRadio(TETRA).ThepresentdocumenthasbeenproducedbyETSIinresponsetoamandatefromtheEuropeanCommissionissuedunderCouncilDirective98/34/EC(asamended)layingdownaprocedurefortheprovisionofinformationinthefieldoftechnicalstandardsandregulations.Thepresentdocument,togetherwithEN301435-1,isintendedtobecomeaHarmonizedStandard,thereferenceofwhichwillbepublishedintheOfficialJournaloftheEuropeanCommunitiesreferencingtheCouncilDirectiveontheapproximationofthelawsoftheMemberStatesrelatingtotelecommunicationsterminalequipmentDirective98/13/EC[40].NationaltranspositiondatesDateofadoptionofthisEN:24November2000DateoflatestannouncementofthisEN(doa):28February2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31August2001DateofwithdrawalofanyconflictingNationalStandard(dow):31August2001SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)81ScopeThepresentdocumentspecifiesthetechnicalcharacteristicstobeprovidedbyTErrestrialTrunkedRadio(TETRA)terminalequipment,whichusestheTETRAtechnology.ItappliesonlytoterminalequipmentintendedforpoliceandemergencyservicesoperatingwithinEuropeanharmonizedfrequencybandsintherange380MHzto385MHzand390MHzto395MHz.Theobjectiveofthepresentdocumentistoensurethatnodisturbanceoccurstothepublictelecommunicationsnetwork,toensureproperinter-workingofTETRAterminalswithTETRAnetworks,andTETRAterminaltoTETRAterminalsothatcommunicationcanberoutedsuccessfullythroughtheapplicablenetwork(s).Inadditiontothepresentdocument,otherHarmonizedStandardsmayapply.RequirementsapplytothenetworkinterfaceandtheRadioFrequency(RF)AirInterfaceoftheequipment.TETRAterminalequipmentconsistsofseveralelements.Thepresentdocumentisstructuredtoenabletheapprovaloftheindividualelementsasseparateitems.Becauseoftheneedforeffectiveuseoftheradiospectrum,theessentialairinterfacecharacteristicswillalwaysapply.Foreachessentialrequirementatestisgivenincludingmeasurementmethods.InthepresentdocumenttherearenoElectromagneticCompatibility(EMC)requirementsintermsoftheTerminalDirective98/13/EC[40],article5c.NOTE:TechnicalrequirementsforEMCperformancearecoveredbytherelevantstandardsapplicabletotheEMCDirective89/336/EEC[43]whichalsolaysdowntheconformityassessmentprocedure.ThepresentdocumentisbasedontheradioandprotocolprovisionsofETS300392,ETS300394andETS300396.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN300392-2:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part2:AirInterface(AI)".[2]ETSIEN300392-7:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part7:Security".[3]ETSIETS300392-10:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part10:Supplementaryservicesstage1".[4]ETSIETS300392-11:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part11:Supplementaryservicesstage2".[5]ETSIETS300392-12:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part12:Supplementaryservicesstage3".[6]ETSIETS300392-14:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part14:ProtocolImplementationConformanceStatement(PICS)proformaspecification".SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)9[7]ETSITS100392-15:"TerrestrialTrunkedRadio(TETRA);VoiceplusData(V+D);Part15:TETRAfrequencybands,duplexspacingsandchannelnumbering".[8]ETSIETS300394-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part1:Radio".[9]ETSIETS300394-2-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part1:Testsuitestructureandtestpurposes".[10]ETSIETS300394-2-2:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part2:AbstractTestSuite(ATS)forNetwork(NWK)layer".[11]ETSIETS300394-2-3:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part3:AbstractTestSuite(ATS)forLogicalLinkControl(LLC)".[12]ETSIETS300394-2-4:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part2:ProtocoltestingspecificationforVoiceplusData(V+D);Sub-part4:AbstractTestSuite(ATS)forMediumAccessControl(MAC)".[13]ETSIETS300394-5-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part1:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[14]ETSIETS300394-5-2:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part2:ProtocoltestingspecificationforTETRAsecurity".[15]ETSIETS300394-5-3:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part5:Security;Sub-part3:AbstractTestSuite(ATS)".[16]ETSIETS300396-2:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part2:Radioaspects".[17]ETSIETS300396-3:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part3:MobileStationtoMobileStation(MS-MS)AirInterface(AI)protocol".[18]ETSIEN300396-4:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part4:Type1repeaterairinterface".[19]ETSIETS300396-5:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part5:Gatewayairinterface".[20]ETSIETS300396-6(1996):"TerrestrialTrunkedRadio(TETRA);DirectModeOperation(DMO);Part6:Security".[21]ETSIEN300396-7:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part7:Type2repeaterairinterface".[22]ETSIETS300396-8-1:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part1:MobileStationtoMobileStation(MS-MS)AirInterface(AI)".[23]ETSIEN300396-8-2:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part2:Type1repeaterAirInterface(AI)".[24]ETSIETS300396-8-3:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part3:GatewayAirInterface(AI)".SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)10[25]ETSIEN300396-8-4:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part4:Type2RepeaterAirInterface(AI)".[26]ETSIETS300394-4-1:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part1:Testsuitestructureandtestpurposes(TSS&TP)forMobileStationtoMobileStation(MS-MS)AirInterface(AI)".[27]ETSIETS300394-4-2:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part2:AbstractTestSuite(ATS)forMobileStationtoMobileStation(MS-MS)AirInterface(AI)".[28]ETSIEN300394-4-3:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part3:Testsuitestructureandtestpurposes(TSS&TP)forMobileStation(MS)Repeatertype1".[29]ETSIEN300394-4-4:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part4:Testsuitestructureandtestpurposes(TSS&TP)forDirectModeRepeater(DM-REP)type1".[30]ETSIEN300394-4-5:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part5:AbstractTestSuite(ATS)forMobileStation(MS)Repeatertype1".[31]ETSIEN300394-4-6:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part6:AbstractTestSuite(ATS)forDirectModeRepeater(DM-REP)type1".[32]ETSIETS300394-4-7:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part7:Testsuitestructureandtestpurposes(TSS&TP)forMobileStationtoGateway(MS-GW)AirInterface(AI)".[33]ETSIETS300394-4-8:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part8:Testsuitestructureandtestpurposes(TSS&TP)forDirectModeGateway(DM-GATE)".[34]ETSIETS300394-4-9:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part9:AbstractTestSuite(ATS)forMobileStation(MS)Gateway".[35]ETSIETS300394-4-10:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part10:AbstractTestSuite(ATS)forDirectModeGateway(DM-GATE)".[36]ETSIEN300394-4-11:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part11:TestSuiteStructureandTestPurposes(TSS&TP)forMobileStationRepeatertype2".[37]ETSIEN300394-4-12:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part12:TestSuiteStructureandTestPurposes(TSS&TP)forRepeatertype2".[38]ETSIEN300394-4-13:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part13:AbstractTestSuite(ATS)forMobilestationRepeatertype2".[39]ETSIEN300394-4-14:"TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part14:AbstractTestSuite(ATS)forRepeatertype2".[40]Directive98/13/ECoftheEuropeanParliamentandoftheCouncilof12February1998relatingtotelecommunicationsterminalequipmentandsatelliteearthstationequipment,includingthemutualrecognitionoftheirconformity.SIST EN 301 435-2:2000

ETSIETSIEN301435-2V1.2.4(2000-12)11[41]ERCDecisionERC/DEC/(96)01of7March1996ontheharmonizedfrequencybandtobedesignatedfortheintroductionoftheDigitalLandMobileSystemfortheEmergencyServices.[42]ISO/IEC9646-3(1991):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:Thetreeandtabularcombinednotation".(SeealsoCCITTRecommendationX.292(1992)).[43]CouncilDirective89/336/EECof3May1989ontheapproximationofthelawsoftheMemberStatesrelatingtoelectromagneticcompatibility.3Definitions,symbolsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:acknowledgeddatatransfer:serviceprovidedbythelayerbelowwhichgivesanacknowledgementbackovertheairinterfacefromthelowerlayerpeerentity.Thisserviceisusedbythelayer3entitiestogetasecuretransmissionincludingre-transmissions.announcedcellre-selection:cellre-selectionwhereMS-MLEinformstheSwMIbothintheoldcell(leavingcell)andinthenewcell(arrivingcell)thatcellchangeisperformed.AssociatedControlCHannel(AC
...