iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60670-1:2006/IS1:2009

(Amendment)

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

This part of EN 60670 applies to boxes, enclosures and parts of enclosures (hereafter called boxes and enclosures) for electrical accessories with a rated voltage not exceeding 1 000 V a.c. and 1 500 V d.c. intended for household or similar fixed electrical installations, either indoors or outdoors. This edition cancels and replaces the second edition of EN 60670 published in 1989 and its amendment 1 (1994). This edition constitutes a technical revision.

Dosen und Gehäuse für Installationsgeräte für Haushalt und ähnliche ortsfeste elektrische Installationen - Teil 1: Allgemeine Anforderungen

Boîtes et enveloppes pour appareillage électrique pour installations électriques fixes pour usages domestiques et analogues - Partie 1: Règles générales

La présente partie de la EN 60670 s'applique aux boîtes, parties d'enveloppes et enveloppes (ci-après désignées par les termes "boîtes" et "enveloppes") destinées à des appareillages électriques ayant une tension assignée ne dépassant pas 1 000 V alternatifs et 1 500 V continus prévus pour des installations électriques fixes à usages domestiques ou analogues, pour l'intérieur ou l'extérieur. Cette édition annule et remplace la deuxième édition de la EN 60670 parue en 1989 ainsi que son amendement 1 (1994). Cette édition constitue une révision technique.

Škatle in ohišja za električno opremo za gospodinjstvo in podobne nepremične električne inštalacije - 1. del: Splošne zahteve

General Information

Status
Withdrawn
Publication Date
16-Aug-2009
Withdrawal Date
07-Mar-2023
ICS
29.120.99 - Other electrical accessories
Technical Committee
EPR - Electrical accessories
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Mar-2023
Due Date
31-Mar-2023
Completion Date
08-Mar-2023
Ref Project
EN 60670-1:2005/IS1:2009 - Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

Relations

Replaced By
SIST EN IEC 60670-1:2021 - Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
Effective Date
09-Feb-2021
Replaced By
SIST EN IEC 60670-1:2021 - Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
Effective Date
07-Jun-2022
Amends
SIST EN 60670-1:2006 - Boxes and enclosures for electrical accessories for household and similar fixed electrical installations -- Part 1: General requirements
Effective Date
14-Feb-2012

Buy Standard

EN 60670-1:2006/IS1:2009EN 60670-1:2006/IS1:2009
PreviousNext
Addendum
EN 60670-1:2006/IS1:2009
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60670-1:2006/IS1:2009
01-september-2009
âNDWOHLQRKLãMD]DHOHNWULþQRRSUHPR]DJRVSRGLQMVWYRLQSRGREQHQHSUHPLþQH
HOHNWULþQHLQãWDODFLMHGHO6SORãQH]DKWHYH
Boxes and enclosures for electrical accessories for household and similar fixed electrical
installations - Part 1: General requirements
Dosen und Gehäuse für Installationsgeräte für Haushalt und ähnliche ortsfeste
elektrische Installationen - Teil 1: Allgemeine Anforderungen
Boîtes et enveloppes pour appareillage électrique pour installations électriques fixes
pour usages domestiques et analogues - Partie 1: Règles générales
Ta slovenski standard je istoveten z: EN 60670-1:2005/IS1:2009
ICS:
29.120.99 'UXJDHOHNWULþQDGRGDWQD Other electrical accessories
RSUHPD
SIST EN 60670-1:2006/IS1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60670-1:2006/IS1:2009

---------------------- Page: 2 ----------------------

SIST EN 60670-1:2006/IS1:2009
EN 60670-1/IS1


Interpretation Sheet 1
EN 60670-1:2005
English version
___________

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60670-24:2013/A11:2023(Amendment)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment
EN 60670-24:2013/A11:2023

To cover requirements for boxes and enclosures with provision for suspension means

  • Amendment
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61316:2021(Main)
Industrial cable reels (IEC 61316:2021)
EN IEC 61316:2021

This document applies to cable reels provided with a non-detachable flexible cable with a
rated operating voltage not exceeding 690 V DC and/or 690 V AC with a frequency not
exceeding 500 Hz and a rated current not exceeding 63 A, primarily intended for industrial
use, either indoors or outdoors, for use with accessories complying with IEC 60309-1,
IEC 60309-2 or IEC 60309-4.
This document applies to:
– portable cable reels equipped with one plug or appliance-inlet complying with IEC 60309-1
or IEC 60309-2 and at least one socket-outlet complying with IEC 60309-1, IEC 60309-2
or IEC 60309-4;
– fixed cable reels equipped with at least one socket-outlet complying with IEC 60309-1,
IEC 60309-2 or IEC 60309-4;
– cable reels suitable for use at ambient temperature normally within the range of −25 °C
to +40 °C.
The use of this equipment on construction sites and for agricultural, commercial and domestic
appliances is not precluded.
This document also applies to cable reels intended to be used in extra-low voltage
installations.
In locations where special conditions prevail, for example, on board ships, in vehicles and the
like, or where explosions are liable to occur, additional requirements can be necessary.
NOTE 1 This document was not developed for Electric Vehicle (EV) application, but it can be used as guide for
cable reels for EV application
NOTE 2 Additional requirements for cable reels for currents higher than 63 A are under consideration.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60670-1:2021/A11:2021(Amendment)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
EN IEC 60670-1:2021/A11:2021

To be launched for vote and published with prEN IEC=66754.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60670-1:2021(Main)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
EN IEC 60670-1:2021

This part of IEC 60670 applies to boxes, enclosures and parts of enclosures (hereafter called
“boxes” and “enclosures”) for electrical accessories with a rated voltage not exceeding
1 000 V a.c. and 1 500 V d.c. intended for household or similar fixed electrical installations,
either indoors or outdoors.
Boxes and enclosures complying with this standard are suitable for use at ambient
temperatures not normally exceeding +40 °C, but their average over a period of 24 h does not
exceed +35 °C, with a lower limit of the ambient air temperature of −5 °C.
During the installation the temperature may be outside the above temperature range
according to the classification of the boxes and the enclosures.
This International Standard is intended to apply to boxes and enclosures for electrical
accessories within the scope of IEC technical committee 23.
This standard may be used as a reference document for other IEC technical committees and
subcommittees.
A box or an enclosure which is an integral part of an electrical accessory and provides
protection for that accessory against external influences (for example mechanical impact,
ingress of solid objects or water, etc.) is covered by the relevant standard for such an
accessory.
This standard does not apply to
– ceiling roses;
– luminaire supporting couplers;
– boxes, enclosures and parts of enclosures specifically designed to be used for cable
trunking and ducting systems complying with IEC 61084 and which are not intended to be
installed outside of these systems.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62962:2020(Main)
Particular requirements for load-shedding equipment (LSE) (IEC 62962:2019)
EN IEC 62962:2019

The purpose of this document is to provide requirements for equipment to be used in energy
efficiency systems. This document covers load-shedding equipment (LSE).
Guidelines relating to safety for LSE as given in IEC Guide 110 have been followed.
This document applies to load-shedding equipment for household and similar uses. The loadshedding
function is used in energy management systems to optimize the overall use of
electrical energy including production and storage. Load-shedding can be used for example
for energy efficiency purposes as per IEC 60364-8-1:2019.
This document applies to LSE for operation under normal conditions:
– AC circuits with a rated frequency of 50 Hz, 60 Hz or both, with a rated voltage not
exceeding 440 V (between phases), a rated current not exceeding 125 A and a rated
short-circuit capacity not exceeding 25 000 A; or
– DC circuits1.
LSEs are intended to control the energy supplied to one or more load, circuit or mesh when:
– defined conditions of time and current are reached;
– a command or information from an external system is received.
An LSE is intended to serve as:
– a single equipment having all the necessary means able to control the loads (e.g. the
electrical energy management function is embedded in such an equipment); or
– a unit integrated into a more complex equipment or an independent equipment being part
of an electrical energy management system (EEMS); or
– an assembly of independent equipment forming an LSE (e.g. an LSE with external current
sensors); or
– as a combination of the above points.
LSE can have a wireless interface.
LSE is part of the fixed installation.
NOTE 1 This document covers load shedding equipment in the fixed installations including portable appliances
connected thereto.
LSE are intended for use in circuits with protection against electrical shock and over-current
according to IEC 60364 (all parts).
NOTE 2 For example, fault protection (indirect contact protection) can be covered as follows:
– in TT systems, by an upstream RCBOs or RCCBs according to IEC 61008-1 and IEC 61009-1;
– in a TN system, by an upstream over-current protective device.
LSEs do not, by their nature, provide an isolation function nor the over-current protection.
LSEs are normally installed by instructed persons (IEC 60050-195:1998, 195-04-02) or skilled
persons (IEC 60050-195:1998, 195-04-01) and normally used by ordinary persons
(IEC 60005-195:1998, 195-04-03).
This document contains all requirements necessary to ensure compliance with the operational
characteristics required by type tests for LSEs based on single equipment or based on an
assembly of independent equipment.
These requirements apply for standard conditions of temperature and environment as given
in 5.1. They are applicable to LSEs with a degree of protection of IP 20 intended for use in an
environment with pollution degree 2. For LSE having a degree of protection higher than IP 20
according to IEC 60529, for use in locations where arduous environmental conditions prevail
(e.g. excessive humidity, heat or cold or deposition of dust) and in hazardous locations (e.g.
where explosions are liable of occur), special construction can be required.
If other functions are included in LSE, these functions are covered by the relevant standards.
This document does not address communication aspects such as protocols, interoperability,
data security and any other related aspects.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61242:1997/A13:2017(Amendment)
Electrical accessories - Cable reels for household and similar purposes
EN 61242:1997/A13:2017

D156/C038 - BT approved the British NC request for modification of an SNC in EN 61242:1997 and invited CCMC to issue the corresponding amendment.

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61242:1997/A2:2016(Amendment)
Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995/A2:2015)
EN 61242:1997/A2:2016

2016-01-12: no BT decision available about extension of DOW = DOR + 60 months
2015-04-17: Extension of DOW = DOR + 60 Months to be requested to CLC/BT.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62080:2010/A2:2015(Amendment)
Sound signalling devices for household and similar purposes (IEC 62080:2001/A2:2015)
EN 62080:2009/A2:2015
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60670-24:2013(Main)
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment (IEC 60670-24:2011, modified)
EN 60670-24:2013

This part of IEC 60670 applies to enclosures and parts of them for housing protective devices and other power dissipating electrical equipment intended to be used with a rated voltage not exceeding 400 V and a total incoming load current not exceeding 125 A for household and similar fixed electrical installations. These enclosures are intended to be installed where unskilled persons have access. They are intended to be integrated with electrical equipment on site by skilled persons (installers). They are intended to be installed where the prospective short circuit current does not exceed 10 kA unless they are protected by current limiting protective devices with a cut-off current not exceeding 17 kA. Enclosures complying with this standard are suitable for use, after installation, at ambient temperature not normally exceeding 25 °C, but occasionally reaching 35 °C over 24 h, max. 40 °C and min. –5 °C. An enclosure which is an integral part of an electrical accessory and provides protection against external influences (e.g. mechanical impacts, ingress of solid objects or of water), is covered by the relevant standard for such an accessory. This standard does not apply to a low-voltage switchgear and controlgear assembly(ASSEMBLY) as defined in the IEC 60439 or IEC 61439 series of standards nor to a main entrance panel which may or may not be part of the distribution board.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62080:2010(Main)
Sound signalling devices for household and similar purposes (IEC 62080:2001 (EQV) + A1:2008 )
EN 62080:2009

This International Standard applies to sound signalling devices with integral enclosures or to sound signalling devices intended to be fitted into or supplied with enclosures according to IEC 60670 intended for household and similar purposes with rated voltages not exceeding 250 V a.c. or 250 V d.c. and with rated power inputs not exceeding 100 VA. In these sound signalling devices an indicating light having a rated input power not exceeding 10 VA may also be incorporated. These products are designated as "devices" throughout the remainder of the text. This standard applies to fixed, portable and plug-in devices for indoor or outdoor use. In locations where special conditions prevail, special constructions may be required.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day