SIST EN 62080:2010
(Main)Sound signalling devices for household and similar purposes (IEC 62080:2001 (EQV) + A1:2008 )
Sound signalling devices for household and similar purposes (IEC 62080:2001 (EQV) + A1:2008 )
This International Standard applies to sound signalling devices with integral enclosures or to sound signalling devices intended to be fitted into or supplied with enclosures according to IEC 60670 intended for household and similar purposes with rated voltages not exceeding 250 V a.c. or 250 V d.c. and with rated power inputs not exceeding 100 VA. In these sound signalling devices an indicating light having a rated input power not exceeding 10 VA may also be incorporated. These products are designated as "devices" throughout the remainder of the text. This standard applies to fixed, portable and plug-in devices for indoor or outdoor use. In locations where special conditions prevail, special constructions may be required.
Akustische Signalgeber für den Haushalt und ähnliche Zwecke (IEC 62080:2001 (EQV) + A1:2008 )
Dispositifs de signalisation sonore pour usage domestique et analogue (CEI 62080:2001 (EQV) + A1:2008 )
Zvočne signalizacijske naprave za gospodinjstva in podobne namene (IEC 62080:2001 (EQV) + A1:2008)
Ta mednarodni standard velja za zvočne signalizacijske naprave z zaprtimi sestavnimi deli ali za zvočne signalizacijske naprave, namenjene za vgraditev v ali dobavo z zaprtim sistemom v skladu z IEC 60670 za gospodinjske in podobne namene z ocenjeno napetostjo, ki ne presega 250 V izmenične napetosti ali 250 V enosmerne napetosti in z ocenjenim dovodom energije, ki ne presega 100 VA. V teh zvočnih signalizacijskih napravah je lahko vključena tudi prikazna luč, ki ima ocenjeno vhodno moč, ki ne presega 10 VA. Ti proizvodi so v preostalem besedilu označeni kot »naprave«. Ta standard velja za stalne, prenosne ali priključne naprave za notranjo ali zunanjo uporabo. Na lokacijah, kjer prevladajo posebni pogoji, so lahko potrebna posebna navodila.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62080:2010
01-februar-2010
=YRþQHVLJQDOL]DFLMVNHQDSUDYH]DJRVSRGLQMVWYDLQSRGREQHQDPHQH ,(&
(49 $
Sound signalling devices for household and similar purposes (IEC 62080:2001 (EQV) +
A1:2008 )
Akustische Signalgeber für den Haushalt und ähnliche Zwecke (IEC 62080:2001 (EQV)
+ A1:2008 )
Dispositifs de signalisation sonore pour usage domestique et analogue (CEI 62080:2001
(EQV) + A1:2008 )
Ta slovenski standard je istoveten z: EN 62080:2009
ICS:
29.120.99 'UXJDHOHNWULþQDGRGDWQD Other electrical accessories
RSUHPD
SIST EN 62080:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62080:2010
---------------------- Page: 2 ----------------------
SIST EN 62080:2010
EUROPEAN STANDARD
EN 62080
NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM
ICS 29.120.99
English version
Sound signalling devices for household and similar purposes
(IEC 62080:2001 + A1:2008)
Dispositifs de signalisation sonore Akustische Signalgeber für den Haushalt
pour usage domestique et analogue und ähnliche Zwecke
(CEI 62080:2001 + A1:2008) (IEC 62080:2001 + A1:2008)
This European Standard was approved by CENELEC on 2009-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62080:2009 E
---------------------- Page: 3 ----------------------
SIST EN 62080:2010
EN 62080:2009 - 2 -
Foreword
The text of the International Standard IEC 62080:2001 and its amendment 1:2008, prepared by IEC TC 23
Electrical accessories, was submitted to the Unique Acceptance Procedure and was approved by CENELEC
as EN 62080 on 2009-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62080:2001 + A1:2008 was approved by CENELEC as a
European Standard without any modification.
__________
---------------------- Page: 4 ----------------------
SIST EN 62080:2010
- 3 - EN 62080:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60065 1998 Audio, video and similar electronic apparatus - EN 60065 1998
(mod) Safety requirements
2)
IEC 60068-2-32 1975 Environmental testing - EN 60068-2-32 1993
Part 2: Tests - Test Ed: Free fall
IEC 60068-2-75 1997 Environmental testing - EN 60068-2-75 1997
Part 2-75: Tests - Test Eh: Hammer tests
IEC 60083 1997 Plugs and socket-outlets for domestic and - -
similar general use standardized in member
countries of IEC
3)
IEC 60085 1984 Thermal evaluation and classification of HD 566 S1 1990
electrical insulation
4)
IEC 60112 1979 Method for determining the comparative and HD 214 S2 1980
the proof tracking indices of solid insulating
materials under moist conditions
IEC 60127 series Miniature fuses EN 60127 series
IEC 60212 1971 Standard conditions for use prior to and during HD 437 S1 1984
the testing of solid electrical insulating
materials
IEC 60216 series Electrical insulating materials - Thermal EN 60216 series
endurance properties
5)
IEC 60227 series Polyvinyl chloride insulated cables of rated - -
voltages up to and including 450/750 V
6)
IEC 60245 series Rubber insulated cables - Rated voltages - -
up to and including 450/750 V
IEC 60317 series Specifications for particular types of winding EN 60317 series
wires
IEC 60320 series Appliance couplers for household and similar EN 60320 series
general purposes
1)
EN 60065 is superseded by EN 60065:2002, which is based on IEC 60065:2001, mod.
2)
EN 60068-2-32 is superseded by EN 60068-2-31:2008, which is based on IEC 60068-2-31:2008.
3)
HD 566 S1 was superseded by EN 60085:2004, which is itself superseded by EN 60085:2008, based on IEC 60085:2007.
4)
HD 214 S1 is superseded by EN 60112:2003, which is based on IEC 60112:2003.
5)
The HD 21 series, which is related to, but not directly equivalent with the IEC 60227 series, applies instead.
6)
The HD 22 series, Cables of rated voltages up to and including 450/750 V and having cross-linked insulation, which is related to, but
not directly equivalent with the IEC 60245 series, applies instead.
---------------------- Page: 5 ----------------------
SIST EN 62080:2010
EN 62080:2009 - 4 -
Publication Year Title EN/HD Year
7)
IEC 60384-14 1993 Fixed capacitors for use in electronic - -
equipment -
Part 14: Sectional specification: Fixed
capacitors for electromagnetic interference
suppression and connection
to the supply mains
IEC 60417 database Graphical symbols for use on equipment - -
IEC 60529 1989 Degrees of protection provided by enclosures EN 60529 1991
(IP Code) + corr. May 1993
8)
IEC 60664-1 1992 Insulation coordination for equipment within EN 60664-1 2003
low-voltage systems -
Part 1: Principles, requirements and tests
9) 10)
IEC 60664-3 - Insulation coordination for equipment within EN 60664-3 2003
low-voltage systems -
Part 3: Use of coating, potting or moulding for
protection against pollution
IEC 60670 series Boxes and enclosures for electrical EN 60670 series
(mod) accessories for household and similar fixed
electrical installations
11)
IEC 60695-2-1 all Fire hazard testing - EN 60695-2-1 all
sheets Part 2: Test methods - Section 1: Glow-wire sheets
test methods
IEC 60730 series Automatic electrical controls for household EN 60730 series
(mod) and similar use
IEC 60998 series Connecting devices for low voltage circuits EN 60998 series
(mod) for household and similar purposes
12)
IEC 61000-2-2 1990 Electromagnetic compatibility (EMC) - - -
Part 2: Environment - Section 2: Compatibility
levels for low-frequency conducted
disturbances and signalling in public
low-voltage power supply systems
13)
IEC 61000-3-2 2000 Electromagnetic compatibility (EMC) - EN 61000-3-2 2000
(mod) Part 3-2: Limits - Limits for harmonic current
emissions (equipment input current up to and
including 16 A per phase)
14)
IEC 61000-3-3 1994 Electromagnetic compatibility (EMC) - EN 61000-3-3 1995
Part 3-3: Limits - Limitation of voltage + corr. July 1997
fluctuations and flicker in low-voltage supply
systems for equipment with rated
current ≤ 16 A
15)
IEC 61000-4-2 1995 Electromagnetic compatibility (EMC) - EN 61000-4-2 1995
Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity
test
7)
IEC 60384-14 is superseded by IEC 60384-14:2005, which is harmonized as EN 60384-14:2005.
8)
EN 60664-1 is superseded by EN 60664-1:2007, which is based on IEC 60664-1:2007.
9)
Undated reference.
10)
Valid edition at date of issue.
11)
EN 60695-2-1/0 to 1/3 are superseded by EN 60695-2-10:2001 to EN 60695-2-13:2001, which are based on IEC 60695-2-10:2000
to IEC 60695-2-13:2000.
12)
IEC 61000-2-2 is superseded by IEC 61000-2-2:2002, which is harmonized as EN 61000-2-2:2002.
13)
EN 61000-3-2 is superseded by EN 61000-3-2:2006, which is based on IEC 61000-3-2:2005.
14)
EN 61000-3-3 is superseded by EN 61000-3-3:2008, which is based on IEC 61000-3-3:2008.
15)
EN 61000-4-2 is superseded by EN 61000-4-2:2009, which is based on IEC 61000-4-2:2008.
---------------------- Page: 6 ----------------------
SIST EN 62080:2010
- 5 - EN 62080:2009
Publication Year Title EN/HD Year
16)
IEC 61000-4-3 1995 Electromagnetic compatibility (EMC) - EN 61000-4-3 1996
(mod) Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
17)
IEC 61000-4-4 1995 Electromagnetic compatibility (EMC) - EN 61000-4-4 1995
Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst
immunity test
18)
IEC 61000-4-5 1995 Electromagnetic compatibility (EMC) - EN 61000-4-5 1995
+ corr. October 1995 Part 4-5: Testing and measurement
techniques - Surge immunity test
19)
IEC 61000-4-6 1996 Electromagnetic compatibility (EMC) - EN 61000-4-6 1996
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-frequency
fields
20)
IEC 61000-4-11 1994 Electromagnetic compatibility (EMC) - EN 61000-4-11 1994
Part 4-11: Testing and measurement
techniques - Voltage dips, short interruptions
and voltage variations immunity tests
21)
IEC 61558-1 1997 Safety of power transformers, power supply EN 61558-1 1997
(mod) units and similar - + A11 2003
Part 1: General requirements and tests
CISPR 14 series Electromagnetic compatibility - Requirements EN 55014 series
for household appliances, electric tools
and similar apparatus
22)
ISO 1456 1988 Metallic coatings - Electrodeposited coatings - -
of nickel plus chromium and of copper plus
nickel plus chromium
23)
ISO 2081 1986 Metallic coatings - Electroplated coatings - -
of zinc on iron or steel
ISO 2093 1986 Electroplated coatings of tin - Specification - -
and test methods
16)
EN 61000-4-3 is superseded by EN 61000-4-3:2002, which is based on IEC 61000-4-3:2002.
17)
EN 61000-4-4 is superseded by EN 61000-4-4:2004, which is based on IEC 61000-4-4:2004.
18)
EN 61000-4-5 is superseded by EN 61000-4-5:2006, which is based on IEC 61000-4-5:2005.
19)
EN 61000-4-6 was superseded by EN 61000-4-6:2007, which is itself superseded by EN 61000-4-6:2009, based on
IEC 61000-4-6:2008.
20)
EN 61000-4-11 is superseded by EN 61000-4-11:2004, which is based on IEC 61000-4-11:2004.
21)
EN 61558-1 is superseded by EN 61558-1:2005, which is based on IEC 61558-1:2005.
22)
ISO 1456:1988 is superseded by ISO 1456:2009, which is harmonized as EN ISO 1456:2009.
23)
ISO 2081:1986 is superseded by ISO 2081:2008, which is harmonized as EN ISO 2081:2008.
---------------------- Page: 7 ----------------------
SIST EN 62080:2010
---------------------- Page: 8 ----------------------
SIST EN 62080:2010
IEC 62080
Edition 1.1 2009-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Sound signalling devices for household and similar purposes
Dispositifs de signalisation sonore pour usage domestique et analogue
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CM
CODE PRIX
ICS 29.120.99 ISBN 2-8318-1017-2
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN 62080:2010
– 2 – 62080 © IEC:2001+A1:2008
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references.6
3 Definitions.8
4 General requirements .12
5 General notes on tests.12
6 Classification.13
7 Marking.14
8 Protection against electric shock.17
9 Constructional requirements .17
10 Normal operation .22
11 Temperature rise.23
12 Abnormal conditions .27
13 Resistance to ageing, protection against ingress of solid objects and against
harmful ingress of water and to humidity .28
14 Insulation resistance and dielectric strength .31
15 Mechanical strength.34
16 Resistance to heat .39
17 Internal wiring.40
18 Components.40
19 Terminals.41
20 Flexible cables and their connection.41
21 Provision for earthing.47
22 Screws, current-carrying parts and connections .47
23 Creepage distances and clearances.49
24 Resistance of insulating material to abnormal heat and to fire .51
25 Resistance to rusting .52
26 EMC requirements.52
Annex A (normative) Electronic devices .64
Annex B (normative) EMC requirements.67
Annex C (normative) Measurement of creepage distances and clearances .71
55
Figure 1 – Examples of different types of screws .
Figure 2 – Standard test finger .56
Figure 3 - Arrangement for test on covers or cover-plates.57
Figure 4 – Gauge (thickness: about 2 mm) for the verification of the outline of covers
and cover-plates .57
Figure 5 – Examples of application of the gauge of figure 4 on covers screwlessly fixed
on a mounting surface or supporting surface .58
---------------------- Page: 10 ----------------------
SIST EN 62080:2010
62080 © IEC:2001+A1:2008 – 3 –
Figure 6 – Examples of application of the gauge of figure 4 in accordance with the
requirements.59
Figure 7 – Void .60
Figure 8 – Sketch showing the direction of application of the gauge of figure 7 .60
Figure 9 – Ball-pressure apparatus.61
Figure 10 – Flexing test apparatus .61
Figure 11 – Test pins .62
Figure 12 – Test wall.62
Figure 13 – Diagrammatic representation .63
Table 1 – Force to be applied to covers, cover-plates, or actuating members whose
fixing are not dependent on screws .19
Table 2 – Torque to be applied to screws and connections .23
Table 3 – Values of maximum temperature rise .26
Table 4 – Temperature limits.27
Table 5 – Minimum values of insulation resistance for additive insulation protected
devices and earth protected devices.31
Table 6 – Minimum values of insulation resistance for installation protected devices .32
Table 7a – Test voltages for devices having a rated voltage not exceeding 130 V .32
Table 7b – Test voltages for devices having a rated voltage exceeding 130 V .33
34
Table 8 – Test voltages .
Table 9 – Pull force on pins .36
Table 10 – Torques for verification of the mechanical resistance of the screwed glands .37
Table 11 – Pull force and torque.43
Table 12 – Minimum clearances .50
Table 13a – Creepage distances of basic and supplementary insulation.50
Table 13b – Creepage distances of reinforced insulation .50
Table B.1 – Tests requirements and levels according to the family of the device .67
---------------------- Page: 11 ----------------------
SIST EN 62080:2010
– 4 – 62080 © IEC:2001+A1:2008
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
SOUND SIGNALLING DEVICES
FOR HOUSEHOLD AND SIMILAR PURPOSES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62080 has been prepared by Technical Committee 23: Electrical
accessories.
This consolidated version of IEC 62080 consists of the first edition (2001) [documents
23/287/FDIS and 23/293/RVD] and its amendment 1 (2008) [documents 23/450/FDIS and
23/457/RVD].
The technical content is therefore identical to the base edition and its amendment and has
been prepared for user convenience.
It bears the edition number 1.1.
A vertical line in the margin shows where the base publication has been modified by
amendment 1.
---------------------- Page: 12 ----------------------
SIST EN 62080:2010
62080 © IEC:2001+A1:2008 – 5 –
Annexes A, B and C form an integral part of this standard.
In this standard, the following print types are used:
– requirements proper: in roman type;
– test specifications: in italic type;
– explanatory matter: in smaller roman type.
Words in bold are defined in clause 3.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date,
the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 13 ----------------------
SIST EN 62080:2010
– 6 – 62080 © IEC:2001+A1:2008
SOUND SIGNALLING DEVICES
FOR HOUSEHOLD AND SIMILAR PURPOSES
1 Scope
This International Standard applies to sound signalling devices with integral enclosures or to
sound signalling devices intended to be fitted into or supplied with enclosures according to
IEC 60670 intended for household and similar purposes with rated voltages not exceeding 250
V a.c. or 250 V d.c. and with rated power inputs not exceeding 100 VA. In these sound
signalling devices an indicating light having a rated input power not exceeding 10 VA may
also be incorporated.
These products are designated as "devices" throughout the remainder of the text.
This standard applies to fixed, portable and plug-in devices for indoor or outdoor use.
In locations where special conditions prevail, special constructions may be required.
NOTE 1 This standard or parts of it may be used as a guide for sound signalling devices having a voltage less
than 50 V a.c. or 75 V d.c. Additional requirements for sound signalling devices having a voltage less than
50 V a.c. or 75 V d.c. are under consideration.
NOTE 2 This standard does not cover the radio transmitting or receiving functions.
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60065:1998, Audio, video and similar electronic apparatus – Safety requirements
IEC 60068-2-32:1975, Environmental testing – Part 2: Tests. Test Ed: Free fall (Procedure 1)
IEC 60068-2-75:1997, Environmental testing – Part 2-75: Tests. Test Eh: Hammer tests
IEC 60083:1997, Plugs and socket-outlets for domestic and similar general use standardized in
member countries of IEC
IEC 60085:1984, Thermal evaluation and classification of electrical insulation
IEC 60112:1979, Method for determining the comparative and the proof tracking indices of solid
insulating materials under moist conditions
IEC 60127 (all parts), Miniature fuses
IEC 60212:1971, Standard conditions for use prior to and during the testing of solid electrical
insulating materials
IEC 60216 (all parts), Guide for the determination of thermal endurance properties of electrical
insulating materials
IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including
450/750 V
IEC 60245 (all parts), Rubber insulated cables – Rated voltages up to and including 450/750 V
---------------------- Page: 14 ----------------------
SIST EN 62080:2010
62080 © IEC:2001+A1:2008 – 7 –
IEC 60317 (all parts), Specifications for particular types of winding wires
IEC 60320 (all parts), Appliance couplers for household and similar general purposes
IEC 60384-14:1993, Fixed capacitors for use in electronic equipment – Part 14: Sectional
specification: Fixed capacitors for electromagnetic interference suppression and connection to
the supply mains
IEC 60417 (all parts), Graphical symbols for use on equipment
IEC 60529:1989, Degrees of protection provided by enclosures (IP Code)
IEC 60664-1:1992, Insulation coordination for equipment within low-voltage systems – Part 1:
Principles, requirements and tests
IEC 60664-3, Insulation coordination for equipment within low-voltage systems – Part 3: Use of
coatings to achieve insulation coordination of printed board assemblies
IEC 60670, General requirements for enclosures for accessories for household and similar
fixed-electrical installations
IEC 60695-2-1 (all sheets) Fire hazard testing – Part 2: Test methods – Section 1: Glow-wire
test and guidance
IEC 60730 (all parts), Automatic electrical controls for household and similar use
IEC 60998 (all parts), Connecting devices for low-voltage circuits for household and similar
purposes
IEC 61000-2-2:1990, Electromagnetic compatibility (EMC) – Part 2: Environment – Section 2:
Compatibility levels for low-frequency conducted disturbances and signalling in public low-
voltage power supply systems
IEC 61000-3-2:2000, Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment input current ≤16 A per phase)
IEC 61000-3-3:1994, Electromagnetic compatibility (EMC) – Part 3: Limits – Section 3:
Limitation of voltage fluctuation and flicker in low-voltage supply systems for equipment with
rated current ≤16 A
IEC 61000-4-2:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.