iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 26595:1996

(Main)

Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)

Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)

Describes a procedure for water and waste water. Is applicable to concentrations in the range from 0,001 to 0,1 mg/l. In case of compounds which are difficult to decompose a procedure of digestion is described in the annex. By suitable dilution of the test portion with arsenic-free water higher concentrations may also be determined.

Wasserbeschaffenheit - Bestimmung von Arsen - Photometrisches Verfahren mit Silberdiethyldithiocarbamat (ISO 6595:1982)

Qualité de l'eau - Dosage de l'arsenic total - Méthode spectrophotométrique au diéthyldithiocarbamate d'argent (ISO 6595:1982)

S'applique aux cafetières électriques à usage domestique, pas aux appareils destinés à un usage commercial ou industriel. La norme définit les principales caractéristiques d'aptitude à la fonction intéressant le consommateur et décrit les méthodes normalisées pour la vérification de ces caractéristiques.

Kakovost vode - Določanje skupnega arzena - Spektrofotometrijska metoda s srebrovim dietilditiokarbamatom (ISO 6595:1982)

General Information

Status
Withdrawn
Publication Date
31-May-1996
Withdrawal Date
08-May-2012
ICS
13.060.50 - Examination of water for chemical substances
Technical Committee
KAV - Water quality
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-May-2012
Due Date
01-Jun-2012
Completion Date
09-May-2012
Directive
76/464/EEC - Pollution caused by certain dangerous substances discharged into the aquatic environment of the Community
Mandate
M/BC/CEN/92/45 - Water analysis
Ref Project
EN 26595:1992 - Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)

Relations

Corrected By
SIST EN 26595:1996/AC:2004 - Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)
Effective Date
01-Jun-2004

Buy Standard

EN 26595:1996EN 26595:1996
PreviousNext
Standard
EN 26595:1996
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wasserbeschaffenheit - Bestimmung von Arsen - Photometrisches Verfahren mit Silberdiethyldithiocarbamat (ISO 6595:1982)Qualité de l'eau - Dosage de l'arsenic total - Méthode spectrophotométrique au diéthyldithiocarbamate d'argent (ISO 6595:1982)Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spect
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 20596-2:2023(Main)
Water quality - Determination of cyclic volatile methylsiloxanes in water - Part 2: Method using liquid-liquid extraction with gas chromatography-mass spectrometry (GC-MS) (ISO 20596-2:2021)
EN ISO 20596-2:2022

This document specifies a method for the determination of certain cyclic volatile methylsiloxanes (cVMS) in environmental water samples with low density polyethylene (LDPE) as a preservative and subsequent liquid-liquid extraction with hexane containing 13C-labeled cVMS as internal standards. The extract is then analysed by gas chromatography-mass spectrometry (GC-MS).
NOTE       Using the 13C-labeled, chemically identical substances as internal standards with the same properties as the corresponding analytes, minimizes possible substance-specific discrimination in calibrations. Since these substances are least soluble in water, they are introduced via the extraction solvent hexane into the system.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20595:2023(Main)
Water quality - Determination of selected highly volatile organic compounds in water - Method using gas chromatography and mass spectrometry by static headspace technique (HS-GC-MS) (ISO 20595:2018)
EN ISO 20595:2022

ISO 20595:2018 specifies a method for the determination of selected volatile organic compounds in water (see Table 1). This comprises among others volatile halogenated hydrocarbons as well as gasoline components (BTXE, TAME, MTBE and ETBE).
The method is applicable to the determination of volatile organic compounds (see Table 1) in drinking water, groundwater, surface water and treated waste water in mass concentrations >0,1 µg/l. The lower application range depends on the individual compound, the amount of the blank value and the matrix.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10304-4:2022(Main)
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 4: Determination of chlorate, chloride and chlorite in water with low contamination (ISO 10304-4:2022)
EN ISO 10304-4:2022

This document specifies a method for the determination of the dissolved anions chlorate, chloride and
chlorite in water with low contamination (e.g. drinking water, raw water or swimming pool water).
The diversity of the appropriate and suitable assemblies and the procedural steps depending on them
permit a general description only.
For further information on the analytical technique, see Bibliography.
An appropriate pre-treatment of the sample (e.g. dilution) and the use of a conductivity detector (CD),
UV detector (UV) or amperometric detector (AD) make the working ranges given in Table 1 feasible.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20236:2022(Main)
Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO 20236:2018)
EN ISO 20236:2021

This International Standard specifies a method for the determination of total organic carbon (TOC), dissolved organic carbon (DOC), and for the determination of dissolved and particular bound nitrogen (TNb) in the form of free ammonia, ammonium, nitrite, nitrate and organic compounds capable of conversion to nitrogen oxides under the oxidative conditions described. The procedure is carried out instrumentally.
NOTE 1 Generally the method can be applied for the determination of total carbon (TC) and total inorganic carbon (TIC) (see Annex A in the Outline).
The method is applicable for water (e.g. drinking water, raw water, ground water, surface water, sea water or waste water) containing suspended material of ≤ 100 μm of particle size (convention). Reduce particles of > 100 μm of size to pieces of particle size of ≤ 100 μm before injection. The method allows a determination of TOC/DOC ≥ 1 mg/l C and TNb ≥ 1 mg/l N.
NOTE 2 The determination of carbon concentrations > 0,3 mg/l to 1 mg/l is only applicable in special cases, for example drinking water, measured by highly sensitive instruments. Cyanide, cyanate and particles of elemental carbon (soot), when present in the sample, can be determined together with the organic carbon. Volatile or purgeable organic carbon (VOC, POC) is not determined by this method. Dissolved nitrogen gas is not determined by this method. Generally, the working range is restricted by instrument dependant conditions (e.g. injection volume). Higher concentrations may be determined after appropriate dilution.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21676:2021(Main)
Water quality - Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water - Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection (ISO 21676:2018)
EN ISO 21676:2021

This document specifies a method for the determination of the dissolved fraction of selected active pharmaceutical ingredients and transformation products, as well as other organic substances (see Table 1 of the document) in drinking water, ground water, surface water and treated waste water.
The lower application range of this method can vary depending on the sensitivity of the equipment used and the matrix of the sample. For most compounds to which this document applies, the range is ≥ 0,025 μg/l for drinking water, ground water and surface water, and ≥ 0,050 μg/l for treated waste water.
The method can be used to determine further organic substances or in other types of water (e.g. process water) provided that accuracy has been tested and verified for each case, and that storage conditions of both samples and reference solutions have been validated.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22908:2020(Main)
Water quality - Radium 226 and Radium 228 - Test method using liquid scintillation counting (ISO 22908:2020)
EN ISO 22908:2020

This procedure specifies a method for the determination of 228Ra activity in drinking waters by radium
extraction, purification and liquid scintillation counting.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22125-1:2020(Main)
Water quality - Technetium-99 - Part 1: Test method using liquid scintillation counting (ISO 22125-1:2019)
EN ISO 22125-1:2019

This standard specifies a method for the measurement of 99Tc in all types of waters by liquid
scintillation counting (LSC).
The detection limit depends on the sample volume and the instrument used. The method described in
this standard, using currently available LSC counters, has a detection limit of approximately 5 to 20
Bq•kg-1, which is lower than the WHO criteria for safe consumption of drinking water (100 Bq•L-1).
These values can be achieved with a counting time of 30 minutes for a sample volume varying
between 14 to 40 mL. The methods presented in this standard are not intended for the determination of
ultra-trace amount of 99Tc.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 22125-2:2020(Main)
Water quality - Technetium-99 - Part 2: Test method using inductively coupled plasma mass spectrometry (ICP-MS) (ISO 22125-2:2019)
EN ISO 22125-2:2019

This standard specifies a method for the measurement of 99Tc in all types of waters by inductively coupled plasma mass spectrometry (ICP-MS).
The method described in this standard, using currently available ICP-MS, has a detection limit of approximately 0,2 to 0,5 ng•L-1 (0,1 to 0,3 Bq•kg-1), which is much lower than the WHO criteria for safe consumption of drinking water (100 Bq•L-1). The method presented in this standard is not intended for the determination of ultra-trace amount of 99Tc.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21253-2:2020(Main)
Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
EN ISO 21253-2:2019

This  document specifies the critical issues to address when developing in a laboratory a method for the simultaneous quantitative analysis of numerous organic compounds in water.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21253-1:2020(Main)
Water quality - Multi-compound class methods - Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry (ISO 21253-1:2019)
EN ISO 21253-1:2019

This International Standard gives criteria for mass spectrometric identification of target compounds in water. This document is a guideline for the identification of molecules <1 200 Da. For identification of larger molecules additional investigations are recommended.
This standard shall be used in conjunction with standards developed for the determination of the specific compounds. If the standards for analysing specific compounds give criteria for identification, those criteria shall be followed.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day