iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 26595:1992

(Main)

Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)

Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)

Describes a procedure for water and waste water. Is applicable to concentrations in the range from 0,001 to 0,1 mg/l. In case of compounds which are difficult to decompose a procedure of digestion is described in the annex. By suitable dilution of the test portion with arsenic-free water higher concentrations may also be determined.

Wasserbeschaffenheit - Bestimmung von Arsen - Photometrisches Verfahren mit Silberdiethyldithiocarbamat (ISO 6595:1982)

Qualité de l'eau - Dosage de l'arsenic total - Méthode spectrophotométrique au diéthyldithiocarbamate d'argent (ISO 6595:1982)

S'applique aux cafetières électriques à usage domestique, pas aux appareils destinés à un usage commercial ou industriel. La norme définit les principales caractéristiques d'aptitude à la fonction intéressant le consommateur et décrit les méthodes normalisées pour la vérification de ces caractéristiques.

Kakovost vode - Določanje skupnega arzena - Spektrofotometrijska metoda s srebrovim dietilditiokarbamatom (ISO 6595:1982)

General Information

Status
Withdrawn
Publication Date
08-Oct-1992
Withdrawal Date
05-Dec-2011
ICS
13.060.30 - Sewage water
Technical Committee
CEN/TC 230 - Water analysis
Drafting Committee
CEN/TC 230 - Water analysis
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
06-Dec-2011
Completion Date
06-Dec-2011
Directive
76/464/EEC - Pollution caused by certain dangerous substances discharged into the aquatic environment of the Community
Mandate
M/BC/CEN/92/45 - Water analysis
Ref Project
SIST EN 26595:1996 - Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)

Relations

Corrected By
EN 26595:1992/AC:1992 - Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spectrophotometric method (ISO 6595:1982)
Effective Date
22-Dec-2008

Buy Standard

EN 26595:1996EN 26595:1996
PreviousNext
Standard
EN 26595:1996
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wasserbeschaffenheit - Bestimmung von Arsen - Photometrisches Verfahren mit Silberdiethyldithiocarbamat (ISO 6595:1982)Qualité de l'eau - Dosage de l'arsenic total - Méthode spectrophotométrique au diéthyldithiocarbamate d'argent (ISO 6595:1982)Water quality - Determination of total arsenic - Silver diethyldithiocarbamate spect
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10634:2018(Main)
Water quality - Preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO 10634: 2018)
SIST EN ISO 10634:2019

This document specifies techniques for preparing poorly water-soluble organic compounds (i.e. liquid and solid compounds) with a solubility in water of less than approximately 100 mg/l and introducing them into test vessels for a subsequent biodegradability test in an aqueous medium using standard methods.
The subsequent tests on biodegradability are primarily methods using the analysis of the released carbon dioxide described in ISO 9439 and the determination of the oxygen described in ISO 9408 and following the usual precautions for ISO 10707. Thus, one can notice that the methods measuring the removal of dissolved organic carbon (DOC) are not appropriate.
This document does not specify the biodegradation test methods. It is restricted to describing techniques for introducing the test compounds into the test medium and to keeping them in a dispersed state[4]. These techniques are implemented while observing the experimental conditions described in the standardized methods for evaluating biodegradability. ISO 9439, based on CO2 evolution, is not suitable for testing volatile compounds.
Some of the preparation methods described in this document might not be accepted by regulators for making conclusions on the ready biodegradability of tested compounds.
Examples of biodegradability curves are given in Annex A.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9308-1:2014(Main)
Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO 9308-1:2014)
SIST EN ISO 9308-1:2014

ISO 9308-1:2014 specifies a method for the enumeration of Escherichia coli (E. coli) and coliform bacteria. The method is based on membrane filtration, subsequent culture on a chromogenic coliform agar medium, and calculation of the number of target organisms in the sample. Due to the low selectivity of the differential agar medium, background growth can interfere with the reliable enumeration of E. coli and coliform bacteria, for example, in surface waters or shallow well waters. This method is not suitable for these types of water.
ISO 9308-1:2014 is especially suitable for waters with low bacterial numbers that will cause less than 100 total colonies on chromogenic coliform agar (CCA). These may be drinking water, disinfected pool water, or finished water from drinking water treatment plants.
Some strains of E. coli which are β-D-glucuronidase negative, such as Escherichia coli O157, will not be detected as E. coli. As they are β-D-galactosidase positive, they will appear as coliform bacteria on this chromogenic agar.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7827:2012(Main)
Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:2010)
SIST EN ISO 7827:2013

ISO 7827:2010 specifies a method for the evaluation of the “ready” and “ultimate” biodegradability of organic compounds at a given range of concentrations by aerobic microorganisms. In this context, ISO 7827:2010 also gives specific definitions for the terms “ready” and “ultimate”.
The method applies to organic compounds which are: a) soluble at the concentration used under the conditions of the test [dissolved organic carbon (DOC) concentrations of 10 mg/l to 40 mg/l]; b) non‑volatile or having a negligible vapour pressure under the conditions of the test; c) not significantly adsorbable on glass and activated sludge; d) not inhibitory to the test microorganisms at the concentration chosen for the test.
The method is not suitable for waste waters, as they usually contain significant amounts of water‑insoluble organic carbon, which is not included in DOC measurements.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5814:2012(Main)
Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012)
SIST EN ISO 5814:2013

ISO 5814:2012 specifies an electrochemical method for the determination of dissolved oxygen in water by means of an electrochemical cell which is isolated from the sample by a gas permeable membrane.
Measurement can be made either as a concentration of oxygen in milligrams per litre, percentage saturation (% dissolved oxygen) or both. The method measures oxygen in water corresponding to 1 % to 100 % saturation. However, most instruments permit measurement of values higher than 100 %, i.e. supersaturation.
The method measures oxygen in water with a saturation higher than 100 %, when special arrangements to prevent the outgassing of oxygen during the handling and measurement of the sample are made.
The method is suitable for measurements made in the field and for continuous monitoring of dissolved oxygen, as well as measurements made in the laboratory. It is the preferred method for highly coloured and turbid waters, and also for analysis of waters not suitable for the Winkler titration method because of iron- and iodine-fixing substances, which can interfere in the iodometric method specified in ISO 5813.
The method is suitable for drinking waters, natural waters, waste waters, and saline waters. If used for saline waters, such as sea or estuarine waters, a correction for salinity is essential.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7887:2011(Main)
Water quality - Examination and determination of colour (ISO 7887:2011)
SIST EN ISO 7887:2012

ISO 7887:2011 specifies four different methods, designated A to D, for the examination of colour.
The previously most employed method for assessment of water colour in water treatment plants, limnological surveys, etc. was based on the hexachloroplatinate scale. Methods C and D are harmonized with this traditional procedure.
Method A involves examination of apparent colour by visually observing a water sample in a bottle. This gives only preliminary information, for example for use in field work. Only the apparent colour can be reported.
Method B involves determination of the true colour of a water sample using optical apparatus and is applicable to raw and potable water and to industrial water of low colour. A subclause on interferences is included.
Method C involves determination of the true colour of a water sample using optical apparatus for comparison with hexachloroplatinate concentration at wavelength, λ = 410 nm. A subclause on interferences is included.
Method D involves determination of colour by visual comparison with hexachloroplatinate standard solutions and can be applied to raw and drinking water. A subclause on interferences is included.
Methods A and B are appropriate if the colour hue of the sample differs from the hue of the matching solution.
When stating the result, the procedure used (methods A to D) is also recorded.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6222:1999(Main)
Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrient agar culture medium (ISO 6222:1999)
SIST EN ISO 6222:1999

This European Standard specifies a method for the enumeration of culturable micro-organisms in water by counting the colonies formed in a nutrient agar culture medium after aerobic incubation at 36 °C and 22 °C. The method is intended to measure the operational efficiency of the treatment process of public drinking water supplies and for general application to all types of water. It is particulary applicable to the examination of water intended for  human consumption, including water in closed containers and to natural mineral waters.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10707:1997(Main)
Water quality - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds - Method by analysis of biochemical oxygen demand (closed bottle test) (ISO 10707:1994)
SIST EN ISO 10707:1998

Specifies a method, by analysis of biochemical oxygen demand, for the evaluation in an aqueous medium of the "ultimate" biodegradability of organic compounds at a given concentration by aerobic microorganisms. The method applies to all organic compounds which are sufficiently water soluble to prepare a stock solution or poorly water soluble when using special dosing techniques.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11369:1997(Main)
Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
SIST EN ISO 11369:1998
  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1484:1997(Main)
Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
SIST EN 1484:1998

This European Standard gives guidance for the determination of organic carbon indrinking water, ground water, surface water, sea water and waste water. It dealswith definitions, interferences, reagents, and the sample pretreatment of water samples with a content of organic carbon ranging from 0,3 mg/l to 1000 mg/l while the lower value is only applicable in special cases, for example drinking water, measured with instruments capable of measuring these low levels.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10301:1997(Main)
Water quality - Determination of highly volatile halogenated hydrocarbons - Gas-chromatographic methods (ISO 10301:1997)
SIST EN ISO 10301:1998

Standard confirmed by resolution 281/2002

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day