SIST EN 14575:2005

Geosynthetic barriers - Screening test method for determining the resistance to oxidation

This document specifies a test method for screening the resistance of polyethylene and polypropylene polymeric and bituminous geosynthetic barriers to oxidation.
The data are suitable for screening but not for deriving performance data such as lifetimes greater than
25 years, unless supported by further evidence.

Geosynthetische Dichtungsbahnen - Orientierungsprüfung zur Bestimmung der Oxidationsbeständigkeit

Dieses Dokument legt ein Auswahlprüfverfahren zur Bestimmung der Oxidationsbeständigkeit von aus Polyethylen
und Polypropylen bestehenden geosynthetischen Kunststoffdichtungsbahnen und geosynthetischen Bitumendich-
tungsbahnen fest.
Die Daten eignen sich zur Auswahl, jedoch nicht zur Ableitung von Eigenschaften wie beispielsweise Lebensdauer
größer 25 Jahre, sofern sie nicht durch weitere Nachweise bestätigt werden.

Géomembranes - Méthodes d'essai sélective pour la détermination de la résistance a l'oxydation

Ce projet de Norme européenne décrit une méthode d'essai permettant de caractériser la résistance a l'oxydation des barrieres géosynthétiques polymériques et bitumineuses.
Les informations fournies permettent d'effectuer une caractérisation mais pas de tirer des données performancielles telles que la durée de vie, a moins que d'autres éléments ne viennent étayer les résultats obtenus.

Geosintetične ovire - Preskusna metoda za ugotavljanje odpornosti proti oksidaciji

General Information

• Status: Published
• Publication Date: 30-Jun-2005
• ICS: 59.080.70 - Geotextiles
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2005
• Due Date: 01-Jul-2005
• Completion Date: 01-Jul-2005
• Ref Project: EN 14575:2005 - Geosynthetic barriers - Screening test method for determining the resistance to oxidation

Relations

• Revised: oSIST prEN 24576:2017 - Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
• Effective Date: 01-Apr-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geosynthetische Dichtungsbahnen - Orientierungsprüfung zur Bestimmung der OxidationsbeständigkeitGéomembranes - Méthodes d'essai sélective pour la détermination de la résistance a l'oxydationGeosynthetic barriers - Screening test method for determining the resistance to oxidation59.080.70GeotekstilijeGeotextilesICS:Ta slovenski standard je istoveten z:EN 14575:2005SIST EN 14575:2005en01-julij-2005SIST EN 14575:2005SLOVENSKI
STANDARD



SIST EN 14575:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14575April 2005ICS 59.080.70; 91.100.50English versionGeosynthetic barriers - Screening test method for determiningthe resistance to oxidationBarrières géosynthétiques - Méthode d'essai sélective pourla détermination de la résistance à l'oxydationGeosynthetische Dichtungsbahnen - Orientierungsprüfungzur Bestimmung der OxidationsbeständigkeitThis European Standard was approved by CEN on 3 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14575:2005: ESIST EN 14575:2005



EN 14575:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Principle.5 4 Specimens.5 5 Apparatus.5 6 Conditioning.6 7 Test procedure.6 7.1 Oven temperature.6 7.2 Specimens.6 7.3 Duration of the oven test.6 7.4 Determination of mechanical properties.6 8 Test report.7 Bibliography.8
SIST EN 14575:2005



EN 14575:2005 (E) 3 Foreword This document (EN 14575:2005) has been prepared by Technical Committee CEN/TC 189 “Geosynthetics”, the secretariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at the latest by October 2005. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14575:2005



EN 14575:2005 (E) 4 Introduction In many civil engineering applications geosynthetic barriers may be in contact with water or aqueous solutions in the present soil environment. At the same time, in specific parts of the construction the geosynthetic barriers may be exposed to slowly diffusing oxygen in the soil. The presence of oxygen gives rise to a very slow oxidative degradation process. Polyolefin materials such as polypropylene and polyethylene may be relatively more sensitive to oxidative degradation than polyesters, depending on the formulation of the material and the circumstances in use. It is the purpose of this document to provide a method for screening the resistance of geosynthetic barriers to oxidation in service for at least 25 years. SIST EN 14575:2005



EN 14575:2005 (E) 5 1 Scope This document specifies a test method for screening the resistance of polyethylene and polypropylene polymeric and bituminous geosynthetic barriers to oxidation. The data are suitable for scre
...