SIST EN ISO 3262-10:2024
(Main)Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2024)
Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10:2024)
This document specifies requirements and corresponding methods of test for products made from naturally
occurring talc/chlorite in lamellar form.
Füllstoffe - Anforderungen und Prüfverfahren - Teil 10: Verwachsungen von natürlichem plättchenförmigen Talk und Chlorit (ISO 3262-10:2024)
Dieses Dokument legt Anforderungen und die entsprechenden Prüfverfahren für Produkte aus natürlich vorkommendem, plättchenförmigen Talk/Chlorit fest.
Matières de charge - Spécifications et méthodes d'essai - Partie 10: Mélange talc/chlorite naturel sous forme lamellair (ISO 3262-10:2024)
La présente partie de l'ISO 3262 prescrit les spécifications et les méthodes d'essai correspondantes pour les produits préparés à partir de talc et de chlorite naturels sous forme lamellaire.NOTE Les classes minéralogiques ont été fixées en fonction des produits disponibles sur le marché (voir annexe A).
Polnila - Specifikacije in preskusne metode - 10. del: Naravni talk/klorit v obliki lamel (ISO 3262-10:2024)
Ta dokument določa zahteve in ustrezne preskusne metode za proizvode iz naravnega talka/klorita v obliki lamel.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3262-10:2024
01-marec-2024
Nadomešča:
SIST EN ISO 3262-10:2001
Polnila - Specifikacije in preskusne metode - 10. del: Naravni talk/klorit v obliki
lamel (ISO 3262-10:2024)
Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar
form (ISO 3262-10:2024)
Füllstoffe - Anforderungen und Prüfverfahren - Teil 10: Verwachsungen von natürlichem
plättchenförmigen Talk und Chlorit (ISO 3262-10:2024)
Matières de charge - Spécifications et méthodes d'essai - Partie 10: Mélange talc/chlorite
naturel sous forme lamellair (ISO 3262-10:2024)
Ta slovenski standard je istoveten z: EN ISO 3262-10:2024
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 3262-10:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3262-10:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 3262-10:2024
EN ISO 3262-10
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2024
EUROPÄISCHE NORM
ICS 87.060.10 Supersedes EN ISO 3262-10:2000
English Version
Extenders - Specifications and methods of test - Part 10:
Natural talc/chlorite in lamellar form (ISO 3262-10:2024)
Matières de charge - Spécifications et méthodes d'essai Füllstoffe - Anforderungen und Prüfverfahren - Teil 10:
- Partie 10: Mélange talc/chlorite naturel sous forme Verwachsungen von natürlichem plättchenförmigen
lamellair (ISO 3262-10:2024) Talk und Chlorit (ISO 3262-10:2024)
This European Standard was approved by CEN on 7 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3262-10:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3262-10:2024
EN ISO 3262-10:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3262-10:2024
EN ISO 3262-10:2024 (E)
European foreword
This document (EN ISO 3262-10:2024) has been prepared by Technical Committee ISO/TC 256
"Pigments, dyestuffs and extenders" in collaboration with Technical Committee CEN/TC 298 “Pigments
and extenders” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3262-10:2000.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3262-10:2024
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.