Packaging - Specification for tensional strapping for lifting, lashing and securing of loads

This Specification defines dimensions, physical properties and special requirements for Tensional Steel Strapping used for lifting, lashing and securing of loads.  This steel strapping forms part of a complete system of equipment, seals and strapping and shall be used according to the instructions issued by the manufacturer, which incorporate all the system requirements.

Verpackung - Spezifikation für Umreifungsbänder aus Stahl zum Heben, Binden und Sichern von Ladungen

1 Anwendungsbereich
Diese Europäische Norm legt Maße, physikalische Eigenschaften und spezielle Anforderungen an das
Umreifungsband aus Stahl fest, das zum Heben, Binden und Sichern von Ladungen verwendet wird.
Dieses Stahlband ist Teil eines kompletten Systems von Ausrüstungen, Hülsen und Bändern und muss
gemäß den Richtlinien des Herstellers benutzt werden, die alle Anforderungen des Systems beinhalten.
ANMERKUNG Technische Sicherheitsvorschriften der einzelnen Mitgliedstaaten sollten berücksichtigt werden.

Emballage - Spécifications relatives aux cerclages d'acier pour le levage, l'arrimage et la fixation des charges

1 Domaine d'application
La présente norme spécifie les dimensions, les propriétés physiques ainsi que des prescriptions particulieres relatives aux cerclages d'acier utilisés pour le levage, l'arrimage et la fixation des charges.
Ces cerclages d'acier font partie intégrante d'un systeme complet d'équipements, de fermetures et de bandes de serrage, et doivent etre utilisés conformément aux instructions du fabricant qui comprennent toutes les prescriptions relatives a ce systeme.
NOTE   Il convient de prendre en compte les réglementations techniques de sécurité des Etats Membres.

Embalaža - Podrobni opis povezovalnih trakov za dvigovanje, pritrjevanje in varovanje tovorov

General Information

Status
Published
Publication Date
31-Dec-2001
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2002
Due Date
01-Jan-2002
Completion Date
01-Jan-2002

Buy Standard

Standard
SIST EN 13247:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Podrobni opis povezovalnih trakov za dvigovanje, pritrjevanje in varovanje tovorovVerpackung - Spezifikation für Umreifungsbänder aus Stahl zum Heben, Binden und Sichern von LadungenEmballage - Spécifications relatives aux cerclages d'acier pour le levage, l'arrimage et la fixation des chargesPackaging - Specification for tensional strapping for lifting, lashing and securing of loads55.040SDNLUDQMHPackaging materials and accessoriesICS:Ta slovenski standard je istoveten z:EN 13247:2001SIST EN 13247:2002en01-januar-2002SIST EN 13247:2002SLOVENSKI

STANDARD
SIST EN 13247:2002

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13247March 2001ICS 55.040English versionPackaging - Specification for tensional strapping for lifting,lashing and securing of loadsEmballage - Spécifications relatives aux cerclages d'acierpour le levage, l'arrimage et la fixation des chargesVerpackung - Spezifikation für Umreifungsbänder aus Stahlzum Heben, Binden und Sichern von LadungenThis European Standard was approved by CEN on 4 February 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13247:2001 ESIST EN 13247:2002

Page 2EN 13247:2001Contents PageForeword........................................................................................................................................................31Scope.........................................................................................................................................................42Normative references.................................................................................................................................43Dimensions and mechanical properties....................................................................................................44Physical properties......................................................................................................................................55Marking.........................................................................................................................................................5Annex A (informative)

Finishing..............................................................................................................................8SIST EN 13247:2002

Page 3EN 13247:2001ForewordThis European Standard has been prepared by Technical Committee CEN/TC 261 "Packaging", the secretariat ofwhich is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2001, and conflicting national standards shall be withdrawn at thelatest by September 2001.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 13247:2002

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.