iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 14477:2004

(Main)

Packaging - Flexible packaging material - Determination of puncture resistance - Test methods

Packaging - Flexible packaging material - Determination of puncture resistance - Test methods

This standard describes methods of determining the puncture resistance of a flexible packaging material.  The method is applicable to multilayer flexible packaging materials.

Verpackung, Flexible Packstoffe - Bestimmung der Durchstoßfestigkeit - Prüfverfahren

Emballage - Matériaux d'emballage souples - Détermination de la résistance a la perforation - Méthodes d'essai

La présente norme décrit des méthodes de détermination de la résistance a la perforation d'un matériau d'emballage souple. La méthode est applicable aux matériaux d'emballage souples multicouches.

Embalaža – Prožni embalažni material – Ugotavljanje odpornosti proti prebodu - Preskusne metode

General Information

Status
Published
Publication Date
31-Aug-2004
ICS
55.040 - Packaging materials and accessories
Technical Committee
EPO - Packaging - sales and grouped
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2004
Due Date
01-Sep-2004
Completion Date
01-Sep-2004
Ref Project
EN 14477:2004 - Packaging - Flexible packaging material - Determination of puncture resistance - Test methods

Buy Standard

EN 14477:2004EN 14477:2004
PreviousNext
Standard
EN 14477:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža – Prožni embalažni material – Ugotavljanje odpornosti proti prebodu - Preskusne metodeVerpackung, Flexible Packstoffe - Bestimmung der Durchstoßfestigkeit - PrüfverfahrenEmballage - Matériaux d'emballage souples - Détermination de la résistance a la perforation - Méthodes d'essaiPackaging - Flexible packaging material - Determi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 15507:2018(Main)
Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
EN 15507:2017

This European Standard specifies material parameters, test requirements and procedures for the comparative testing of grades of high molecular weight high density polyethylene (PE-HD-HMW) and medium molecular weight high density polyethylene (PE-HD-MMW), used for the manufacture of packagings and IBCs for the transport of dangerous goods. It is intended to be used in conjunction with selective testing for packagings for liquids. The standard is not intended to be used for comparative testing of recycled plastics material.
NOTE    This European Standard is intended to be used in conjunction with one or more of the international regulations set out in the Bibliography.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16353:2013(Main)
Packaging - Safety guidelines for flexible plastic packaging to minimize the risk of suffocation to children
CEN/TR 16353:2012

This Technical Report covers the safety of flexible plastics packaging that is likely to be accessible to children in the home and may pose a risk of suffocation. It includes flexible plastics packaging intended for single or repeated use.

  • Technical report
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 13688:2008(Main)
Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling
CEN/TR 13688:2008

This Technical Report provides some examples of substances and materials that may cause a sustained impediment in the recycling activities, and is intended to assist in the assessment requirements set out in the standard EN 13430.
It describes substances or materials which cause problems or inhibit the recycling process, or which have a negative influence on the quality of recycled material, and for which it is considered that technological solutions will not be developed in the near future.
These examples are however qualified by the fact that the recycling operations can vary from region to region and state to state, that technology is constantly changing, and that the use to which the recycled material is put will also determine whether such substances and materials are a problem.

  • Technical report
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16103:2005(Main)
Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005)
EN ISO 16103:2005

ISO 16103:2005 specifies the requirements and test methods for the production of recycled plastics materials to be used for packagings for the transport of dangerous goods. This includes guidance on the quality assurance programme.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14479:2004(Main)
Packaging - Flexible packaging material - Determination of residual solvents by dynamic headspace gas chromatography-Absolute method
EN 14479:2004

This standard describes methods for the quantitative determination of residual solvents in flexible packaging by dynamic headspace chromatography where the chemical identities of the residual solvents to be determined are known before commencing the analysis. Residues from thermal decomposition products are not within the scope of this standard.
The method is applicable to flexible packaging materials that may consist of mono- or multiplayer plastic films, paper or board, foil or combinations thereof.
This method does not apply to residual solvents with amounts lower than 0,5 mg/m2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13891:2003(Main)
Tensional strapping - Guide to selection and use of tensional strapping
EN 13891:2003

This European Standard gives guidance on the selection and use of steel and non-metallic tensional strapping.  The term steel strapping covers flat band strapping. Non-metallic strapping covers weftless strapping and extruded thermoplastic strapping.
NOTE 1   EN 13246 specifies the breaking strength and dimensional tolerances of steel strapping and gives guidance on surface finishes of steel strapping.
NOTE 2   EN13394 specifies the dimensional tolerances and tensile properties of non-metallic tensional strapping and weftless (textile) strapping and gives guidance on surface finishes available.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13628-1:2003(Main)
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 1: Absolute methods
EN 13628-1:2002

This part 1 describes methods for the quantitative determination of residual solvents in flexible packaging by static headspace chromatography. The chemical identities of the residual solvents to be determined by this must be known before commencing the analysis. During the analysis there may be interferences from possible products of thermal decomposition. Residues from thermal decomposition products are not within the scope of this standard. Additional peaks due to these products shall not be considered for evaluation of residual solvents.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13628-2:2003(Main)
Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
EN 13628-2:2002

This part 2 should be read in conjunction with prEN (261190) part 1 and describes rapid methods as commonly used in quality control for example for monitoring the level of residual solvents used in the production of flexible packaging by static headspace chromatography. The procedure described in this part involves one single injection of the headspace which implies an incomplete extraction of the solvent. The values obtained may be lower than the absolute content which should be determined according to Part 1. During the analysis there may be interferences from possible products of thermal decomposition.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14046:2003(Main)
Packaging - Evaluation of the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide
EN 14046:2003

This European Standard specifies a method for the evaluation of the ultimate aerobic biodegradability of packaging materials based on organic compounds under controlled composting conditions by measurement of released carbon dioxide at the end of the test. This method is designed to resemble typical aerobic composting conditions for the organic fraction of mixed municipal solid waste. The packaging material is exposed in a laboratory test to an inoculum which is derived from compost. The aerobic composting takes place in an environment where especially temperature, aeration and humidity are closely monitored and controlled. The test method is designed to yield a percentage and rate of conversion of carbon of the test material to released carbon dioxide.
The conditions described in this European Standard do not necessarily always correspond to the optimal conditions allowing the maximum degree of biodegradation to occur.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14045:2003(Main)
Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
EN 14045:2003

This European Standard is used to evaluate the disintegration of packaging materials in a pilot-scale aerobic composting test under defined conditions. Other methods should be used to measure the biodegradability of the packaging materials. Packaging materials are mixed with biowaste and spontaneously composted for 12 weeks in practical oriented composting conditions. At the end of the composting cycle the disintegration is measured by sieving of the compost and the calculation of a mass balance. The influence of the tested sample on the quality of the compost can be be studied by using the compost obtained at the end of the composting process for further measurements such as chemical analyses and ecotoxicity tests.
Additionally this method can be used for visual perception and photographic documentation of the disintegration of packaging materials and for evaluating the effect of their addition on the composting process.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day