iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 8100-2:2024

(Main)

Lifts for the transport of persons and goods - Part 2: Design rules, calculations, examinations and tests of lift components (ISO/DIS 8100-2:2023)

Lifts for the transport of persons and goods - Part 2: Design rules, calculations, examinations and tests of lift components (ISO/DIS 8100-2:2023)

This standard specifies the design rules, calculations, examinations and tests of lift components which are referred to by other standards used for the design of passenger lifts, goods passenger lifts, goods only lifts, and other similar types of lifting appliances.

Aufzüge für den Personen- und Gütertransport - Teil 2: Konstruktionsregeln, Berechnungen und Prüfungen von Aufzugskomponenten (ISO/DIS 8100-2:2023)

Dieses Dokument legt Folgendes für Personen- und Lastenaufzüge fest:
   die Überprüfung von Türverriegelungen;
   die Überprüfung der Fangvorrichtungen;
   die Überprüfung von Geschwindigkeitsbegrenzern;
   die Überprüfung von Puffern;
   die Überprüfung von Sicherheitsschaltungen und Schaltungen mit SIL Einstufung;
   die Überprüfung der Schutzeinrichtung für den aufwärtsfahrenden Fahrkorb gegen Übergeschwindigkeit;
   die Überprüfung der Schutzeinrichtung gegen unbeabsichtigte Bewegung des Fahrkorbs;
   die Überprüfung von Leitungsbruchventilen und Drossel-Rückschlagventilen;
   die Überprüfung von Aufhängungs- und Ausgleichsmitteln;
   die Ablegekriterien für Aufhängungsmittel und den Kraftübertragungskontakt;
   die Berechnung von Führungsschienen;
   Berechnung von Kolben, Zylindern, festen Rohrleitungen und Armaturen;
   die Ermittlung der Traktion;
   die Ermittlung des Sicherheitsbeiwerts von Aufhängungsmitteln;
   die Pendelschlagversuche;
   Fehlerausschluss für elektrische und elektronische Bauteile;
   die Auslegungsregeln für Schaltungen mit SIL Einstufung.
Dieses Dokument gilt nicht für Personenaufzüge, Lastenaufzüge oder Bauteile von Aufzügen, die vor ihrer Veröffentlichung errichtet oder gefertigt wurden.

Elévateurs pour le transport de personnes et d'objets - Partie 2: Règles de conception, calculs, examens et essais des composants pour élévateurs (ISO/DIS 8100-2:2023)

Dvigala za prevoz oseb in blaga - 2. del: Pravila konstruiranja, izračuni, pregledi in preskusi sestavnih delov dvigal (ISO/DIS 8100-2:2023)

General Information

Status
Not Published
Public Enquiry End Date
30-Jan-2024
ICS
91.140.90 - Lifts. Escalators
Technical Committee
DTN - Lift and transport appliances
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Dec-2023
Due Date
24-Apr-2024
Directive
2014/33/EU - Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to lifts and safety components for lifts (recast)
Mandate
M/549 - [C(2016)5884] Lifts and safety components for lifts
Ref Project
prEN ISO 8100-2 - Lifts for the transport of persons and goods - Part 2: Design rules, calculations, examinations and tests of lift components (ISO/DIS 8100-2:2023)

Relations

Revised
SIST EN 81-50:2020 - Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
Effective Date
19-Jan-2023
Revised
SIST EN 81-50:2020 - Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
Effective Date
18-Jan-2023
Revises
SIST EN 81-50:2020 - Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
Effective Date
06-Jul-2022

Buy Standard

prEN ISO 8100-2:2024prEN ISO 8100-2:2024
PreviousNext
Draft
prEN ISO 8100-2:2024
English language
123 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 8100-2:2024
01-januar-2024
Dvigala za prevoz oseb in blaga - 2. del: Pravila konstruiranja, izračuni, pregledi in
preskusi sestavnih delov dvigal (ISO/DIS 8100-2:2023)
Lifts for the transport of persons and goods - Part 2: Design rules, calculations,
examinations and tests of lift components (ISO/DIS 8100-2:2023)
Aufzüge für den Personen- und Gütertransport - Teil 2: Konstruktionsregeln,
Berechnungen und Prüfungen von Aufzugskomponenten (ISO/DIS 8100-2:2023)
Elévateurs pour le transport de personnes et d'objets - Partie 2: Règles de conception,
calculs, examens et essais des composants pour élévateurs (ISO/DIS 8100-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 8100-2
ICS:
91.140.90 Dvigala. Tekoče stopnice Lifts. Escalators
oSIST prEN ISO 8100-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 8100-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 8100-2:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8100-2
ISO/TC 178 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-11-30 2024-02-22
Lifts for the transport of persons and goods —
Part 2:
Design rules, calculations, examinations and tests of lift
components
Elévateurs pour le transport de personnes et d'objets —
Partie 2: Règles de conception, calculs, examens et essais des composants pour élévateurs
ICS: 91.140.90
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8100-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 8100-2:2024
ISO/DIS 8100-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8100-2
ISO/TC 178 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Lifts for the transport of persons and goods —
Part 2:
Design rules, calculations, examinations and tests of lift
components
Elévateurs pour le transport de personnes et d'objets —
Partie 2: Règles de conception, calculs, examens et essais des composants pour élévateurs
ICS: 91.140.90
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 8100-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 8100-2:2024
ISO/DIS 8100-2:2023(E)
Contents Page
European Foreword .v
Foreword . vi
FprEN 81-50:2013 (E) 511Règles de sécurité pour la con
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 25745-2:2015/A1:2024(Amendment)
Energy performance of lifts, escalators and moving walks - Part 2: Energy calculation and classification for lifts (elevators) - Amendment 1: Express zones (ISO 25745- 2:2015/Amd 1:2023)
EN ISO 25745-2:2015/A1:2023
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25745-1:2023(Main)
Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification (ISO 25745-1:2023)
EN ISO 25745-1:2023

This document specifies:
a)       methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis;
b)       methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation.
This document only considers the energy performance during the operational portion of the life cycle of the lifts, escalators or moving walks.
For lifts, this document does not cover energy aspects, such as:
a)       hoistway lighting;
b)       heating and cooling equipment, including fans in the lift car;
c)        machine room lighting;
d)       machine room heating, ventilation and air conditioning;
e)       non-lift, display systems, closed circuit television security cameras, etc.;
f)         non-lift, monitoring systems (building management systems, etc.);
g)       the effect of lift group dispatching on energy consumption;
h)       non-lift equipment consumption through the power sockets;
i)         energy storage systems if used as an alternative energy source for operation.
For escalators and moving walks, this document does not cover energy aspects of the ancillary equipment, such as:
a)       lighting with the exception of comb plate lighting and step gap lighting and traffic light;
b)       cooling and heating;
c)        alarm devices and emergency battery supplies equipment, etc.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-77:2022(Main)
Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions
EN 81-77:2022

This document specifies the special provisions and safety rules for passenger and goods passenger lifts where these lifts are installed in buildings and constructions intended to withstand seismic events in compliance with EN 1998 1:2004 (Eurocode 8).
This document does not introduce any specific provisions and safety rules for lifts when ad ≤ 1 m/s2 as defined in Annex A.
This document does not address other risks due to seismic events (e.g. fire, flood, explosion).
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-70:2021+A1:2022(Main)
Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability
EN 81-70:2021+A1:2022

This document specifies the minimum requirements for the safe and independent access and use of lifts
by persons, including persons with disabilities. It covers the needs of persons with disabilities according
to Annex A.
NOTE For guidance on solutions for increased accessibility and usability, see Annex D.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-71:2022(Main)
Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts
EN 81-71:2022

This document gives requirements in order to ensure the safety of persons when using lifts which are subject to different expected levels of vandalism:
-   Category 1, where lifts are in general public, in locations which are unobserved and limited acts of vandalism might occur, e.g. an enclosed lift in a shopping center;
-   Category 2, where lifts are in general public, in locations which are unobserved where stronger acts of vandalism can be expected e.g. a lift in a public car park.
NOTE   See Annex A for further information with regard to the selection of the vandal resistance category to be applied.
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-58:2022(Main)
Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test
EN 81-58:2022

This document specifies the fire resistance requirements for lift landing doors which can be exposed to a fire from the landing side. This document applies to all types of lift landing doors used as a means of access to lifts in buildings and which are intended to provide a fire barrier to the spread of fire via the lift well.
It also specifies the method of testing and classification of fire resistance of lift landing doors. The test method is only valid for furnaces where the door is mounted in a vertical position. The test method allows for the measurement of integrity and if required the measurement of radiation and thermal insulation.
This document covers the hazard of fire spreading to the lift well during a defined period of time. The fire resistance requirements are expressed in terms of integrity (E), insulation (EI) and radiation (EW).
This document do not cover other technical requirements in addition to fire resistance requirements. The other technical requirements are specified in relevant product standards referring to this document.
This document refers to CO2 as means of tracing the propagation of fire. The document does not cover hazards due to emission of gasses.
This document is not applicable to lift landing doors installed in lifts before the date of its publication.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-28:2022(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts
EN 81-28:2022

This document covers the risk of entrapment of users in the car and in the well, and gives the technical requirements for the alarm systems for passenger and goods passenger lifts, as described in the EN 81 series.
This includes:
-   activation of the alarm,
-   transmission of the alarm,
-   information for use and maintenance,
-   site testing to verify the requirements of this document have been met before the lift is used.
Excluded are:
-   the failure of the communication network (see Annex A), including mobile network signal strength or similar;
-   the failure of the network power supply such that all the lifts in a geographical area create entrapment simultaneously.
This document is not applicable to alarm systems for lifts installed before the date of its publication.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-21:2022(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building
EN 81-21:2022

This document specifies the safety rules related to passenger and goods/passenger lifts installed in existing buildings where limitations enforced by certain building constraints mean that some requirements of EN 81 20:2020 cannot be met.
This document is intended to be read and applied in conjunction with EN 81-20:2020. It addresses the following constraints and gives requirements for alternative solutions:
-   existing perforate walls of the lift well;
-   reduction in available well are leading to reduced distance between car, counterweight or balancing weight;
-   counterweight or balancing weight in a separate existing well;
-   reduced building dimensions and clearances leading to:
-   reductions in available space for headroom and pit;
-   reduced car roof balustrade dimensions;
-   reduced height of sill apron;
-   reduced height of machine and/or pulley room;
-   reduced available area for access door/trap door;
-   reduction in available height of landing doors.
This document is not applicable to lifts installed before the date of its publication.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12158-1:2022(Main)
Builders' hoists for goods - Part 1: Hoists with accessible platforms
EN 12158-1:2021

1.1   This standard deals with power operated temporarily installed builders hoists (referred to as "hoists" in this standard) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a load carrying device:
-   designed for the transportation of goods only;
-   guided;
-   travelling vertically or along a path within 15 degrees max. of the vertical;
-   supported or sustained by drum driven wire rope, chain, rack and pinion, hydraulic jack (direct or indirect), or an expanding linkage mechanism;
-   where masts, when erected, may or may not require support from separate structures;
-   which permits the access of instructed persons during loading and unloading;
-   which are driven by appointed persons;
-   which permits, if necessary, during erection, dismantling, maintenance and inspection, the access and travel by persons who are competent and authorised.
1.2   The standard identifies hazards as listed in clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer.
1.3   This European standard does not specify the additional requirements for:
-   operation in severe conditions (e.g. extreme climates, strong magnetic fields);
-   lightning protection;
-   operation subject to special rules (e.g. potentially explosive atmospheres);
-   electromagnetic compatibility (emission, immunity);
-   handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads);
-   the use of combustion engines;
-   the use of remote controls;
-   hazards occurring during manufacture;
-   hazards occurring as a result of mobility;
-   hazards occurring as a result of being erected over a public road;
-   earthquakes;
-   noise.
1.4   This standard is not applicable to
-   builders hoists for persons and materials;
-   lifts according to EN 8

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 81-22:2021(Main)
Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Passenger and goods passenger lifts with inclined travel path
EN 81-22:2021

1.1   This document specifies the safety rules for the construction and installation of permanently installed new electric lifts, with traction or positive drive, serving defined landings levels, having a vehicle designed to convey passengers or passengers and loads, suspended by ropes or chains and travelling in a vertical plan along guide rails that are inclined at an angle of between 15° and 75° in relation to the horizontal.
1.2   In addition to the requirements of this document, supplementary requirements shall be considered in special cases (potentially explosive atmosphere, extreme climate conditions, seismic conditions, transporting dangerous goods, etc.).
1.3   This document does not cover:
a)   lifts with drives other than those stated in 1.1;
b)   installation of electric lifts in existing buildings to the extent that space does not permit;
c)   important modifications (see Annex E) to a lift installed before this standard is brought into application;
d)   lifting appliances, such as paternosters, mine lifts, theatrical lifts, appliances with automatic caging, skips, lifts and hoists for building and public works sites, ships' hoists, platforms for exploration or drilling at sea, construction and maintenance appliances;
e)   safety during transport, installation, repairs, and dismantling of lifts;
f)   lifts with rated speed ≤ 0,15 m/s.
However, this document may usefully be taken as a basis.
Noise is not dealt with in this document because it is not relevant to the safe use of the lift.
Vibrations are dealt with for electric parts only. Direct effects on human bodies are not considered as harmful.
1.4   This document does not specify the additional requirements necessary for the use of lifts in case of fire.
1.5   Taking into account the state of art, the scope of the present standard is limited as follows:
-   inclination: a variation in inclination is permitted for the guideway;
-   travel path: confined within the vertical plane;
-   maximum capacity of the car: 7 500 kg (100 passengers);
-   maximum rated speed (v): 4 m/s.
These both characteristics (capacity and speed) are linked by the relation given in the following Figure 1.
[Figure 1 not represented]
Key
Q   maximum capacity
V   rated speed
Figure 1 - Speed and capacity
The document applies to all the constituent components of the including: running tracks, guides, safety gear operating device, counter-rails, but excludes the supporting structures, civil engineering structures and anchorages that are dealt with by other regulations.

  • Standard
    220 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    225 pages
    English language
    sale 10% off
    e-Library read for
    1 day