SIST EN 16307-5:2013
(Main)Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
This European Standard gives requirements for the types of industrial trucks specified in the scope of EN ISO 3691-5. This European Standard is intended to be used in conjunction with EN ISO 3691-5. These requirements are supplementary to those stated in EN ISO 3691-5 with the addition of following hazards: - Electromagnetic compatibility (EMC); - When operating in potentially explosive atmospheres. This European standard partially replaces the following requirements of EN ISO 3691-5: - Electrical requirements. This European standard defines supplementary requirements to EN ISO 3691-5: - Protection against crushing, shearing and trapping; - Information for use (instruction handbook and marking). Annex A (informative) contains the list of significant hazards covered by this standard.
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für Füßgängergeführte Flurförderzeuge
Dieses Dokument enthält Anforderungen an die im Anwendungsbereich von EN ISO 3691 5 aufgeführten Flurförderzeugtypen.
Dieses Dokument muss in Verbindung mit prEN ISO 3691-5 angewandt werden. Diese Anforderungen gelten zusätzlich zu denen in EN ISO 3691-5 aufgeführten:
- Elektromagnetische Verträglichkeit (EMV);
- für den Einsatz potentiell explosiver Umgebung .
Das vorliegende Dokument ersetzt teilweise die folgenden Anforderungen von EN ISO 3691 5:
- Elektrische Anforderungen.
Dieses Dokument legt gegenüber EN ISO 3691 5 zusätzliche Anforderungen fest:
- Schutz vor quetschen, scheren und fangen;
- Benutzerinformationen (Betriebsanleitung und Kennzeichnung).
Anhang A (informativ) enthält die Liste der signifikanten Gefährdungen, die in dieser Norm behandelt sind.
Chariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnant
La présente Norme européenne donne des prescriptions pour les types de chariots de manutention tels que spécifiés dans le domaine d’application de l’EN ISO 3691-5.
La présente Norme européenne est destinée à être utilisée en conjonction avec l’EN ISO 3691-5. Ces prescriptions sont complémentaires à celles énoncées dans l’EN ISO 3691-5 avec l’ajout des phénomènes dangereux suivants :
- Compatibilité électromagnétique (EMC) ;
- Fonctionnement en atmosphère potentiellement explosible.
La présente Norme européenne remplace partiellement les prescriptions suivantes de l’EN ISO 3691-5 :
- Prescriptions électriques.
La présente Norme européenne définit des prescriptions supplémentaires à l’EN ISO 3691-5 :
- Protection contre l’écrasement, le cisaillement et l’emprisonnement ;
- Informations pour l’utilisation (notice d’instruction et marquage).
L’Annexe A (informative) contient la liste des phénomènes dangereux significatifs couverts par la présente Norme européenne.
Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešec
Ta evropski standard podaja zahteve za vrste vozil za talni transport, ki so navedene v okviru standarda EN ISO 3691-5. Ta evropski standard je treba uporabljati v povezavi s standardom EN ISO 3691-5. Te zahteve dopolnjujejo zahteve iz standarda EN ISO 3691-5 in dodatno obravnavajo naslednja tveganja: – elektromagnetno združljivost (EMC); – pri obratovanju v potencialno eksplozivnih atmosferah. Ta evropski standard delno nadomešča naslednje zahteve standarda EN ISO 3691-5: – električne zahteve. Ta evropski standard določa dodatne zahteve za standard EN ISO 3691-5: – zaščita pred zdrobitvijo, urezninami in ukleščenjem; – informacije za uporabo (priročnik za uporabo in označevanje). Dodatek A (informativni) vsebuje seznam večjih tveganj, ki jih zajema ta standard.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešecFlurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für Füßgängergeführte FlurförderzeugeChariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnantIndustrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN 16307-5:2013SIST EN 16307-5:2013en,fr,de01-junij-2013SIST EN 16307-5:2013SLOVENSKI
STANDARD
SIST EN 16307-5:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16307-5
March 2013 ICS 53.060 English Version
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
Chariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences supplémentaires pour les chariots à conducteur accompagnant
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge This European Standard was approved by CEN on 10 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16307-5:2013: ESIST EN 16307-5:2013
EN 16307-5:2013 (E) 2 Contents Page Foreword .3 0 Introduction .4 0.1 General .4 0.2 Assessment of hazards .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Safety requirements and/or protective measures .6 4.1 General .6 4.2 Protection against crushing, shearing and trapping .6 4.2.1 General .6 4.2.2 Pedestrian-propelled trucks with mast .6 4.3 Electrical requirements .6 4.4 Electromagnetic compatibility (EMC) .6 4.5 Operation in potentially explosi
...
SLOVENSKI STANDARD
kSIST FprEN 16307-5:2012
01-oktober-2012
Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne
zahteve za vozila, ki jih poganja pešec
Industrial trucks - Safety requirements and verification - Part 5: Supplementary
requirements for pedestrian-propelled trucks
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5:
Zusätzliche Anforderungen für Füßgängergeführte Flurförderzeuge
Chariots de manutention - Exigences de sécurité et vérification - Partie 5: Exigences
supplémentaires pour les chariots à conducteur accompagnant
Ta slovenski standard je istoveten z: FprEN 16307-5
ICS:
53.060 Industrijski tovornjaki Industrial trucks
kSIST FprEN 16307-5:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN 16307-5:2012
---------------------- Page: 2 ----------------------
kSIST FprEN 16307-5:2012
EUROPEAN STANDARD
FINAL DRAFT
FprEN 16307-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2012
ICS 53.060
English Version
Industrial trucks - Safety requirements and verification - Part 5:
Supplementary requirements for pedestrian-propelled trucks
Chariots de manutention - Exigences de sécurité et Flurförderzeuge - Sicherheitstechnische Anforderungen
vérification - Partie 5: Exigences supplémentaires pour les und Verifizierung - Teil 5: Zusätzliche Anforderungen für
chariots à conducteur accompagnant Füßgängergeführte Flurförderzeuge
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 150.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 16307-5:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN 16307-5:2012
FprEN 16307-5:2012 (E)
Contents Page
Foreword .3
0 Introduction .4
0.1 General .4
0.2 Assessment of hazards .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Safety requirements and/or protective measures .6
4.1 General .6
4.2 Protection against crushing, shearing and trapping .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.