SIST EN 16307-5:2024
(Main)Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks
This document gives requirements for the types of industrial trucks specified in the scope of EN ISO 3691-5:2015.
This document is intended to be used in conjunction with EN ISO 3691-5:2015.
This document deals with the following significant hazards, hazardous situations or hazardous events relevant, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
These requirements are supplementary to those stated in EN ISO 3691-5:2015 with the addition of requirements for the following hazards:
- Electromagnetic immunity (external radiation).
This document partially replaces the following requirements of EN ISO 3691-5:2015:
- Electrical requirements.
This document defines supplementary requirements to EN ISO 3691-5:2015:
- protection against crushing, shearing and trapping;
- information for use (instruction handbook and marking);
- when operating in potentially explosive atmospheres.
This document does not define supplementary requirements to EN ISO 3691-5:2015:
- Static electricity;
- Radiation;
- General principles for the drafting of instructions;
- Sales literature.
Annex A (informative) contains the list of significant hazards covered by this document.
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5: Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge
Dieses Dokument enthält Anforderungen an die im Anwendungsbereich von EN ISO 3691-5:2015 aufgeführten Flurförderzeugtypen.
Dieses Dokument ist dafür vorgesehen in Verbindung mit EN ISO 3691-5:2015 angewendet zu werden.
Dieses Dokument behandelt die folgenden signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, die auf die Maschinen zutreffen, wenn sie bestimmungsgemäß und unter Bedingungen, die vom Hersteller als Fehlanwendung vernünftigerweise vorhersehbar sind, verwendet werden.
Diese Anforderungen gelten zusätzlich zu denen in EN ISO 3691-5:2015 aufgeführten:
- Elektromagnetische Störfestigkeit (äußere Strahlung).
Dieses Dokument ersetzt teilweise die folgenden Anforderungen der EN ISO 3691-5:2015:
- Elektrische Anforderungen.
Dieses Dokument legt ergänzende Anforderungen zu EN ISO 3691-5:2015 fest:
- Schutz vor Quetschen, Scheren und Fangen;
- Benutzerinformationen (Betriebsanleitung und Kennzeichnung);
- für den Einsatz in potentiell explosiver Umgebung.
Dieses Dokument legt keine ergänzenden Anforderungen zu EN ISO 3691-5:2015 fest in Bezug auf:
- statische Elektrizität;
- Strahlung;
- allgemeine Grundsätze für die Abfassung der Betriebsanleitung;
- Verkaufsunterlagen.
Anhang A (informativ) enthält die Liste der signifikanten Gefährdungen, die von diesem Dokument behandelt werden.
Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : Exigences supplémentaires pour les chariots à conducteur accompagnant
Le présent document donne des prescriptions pour les types de chariots de manutention spécifiés dans le domaine d’application de l’EN ISO 3691-5:2015.
Le présent document est destiné à être utilisé conjointement avec l’EN ISO 3691-5:2015
Le présent document traite des phénomènes dangereux, situations dangereuses ou événements dangereux significatifs suivants, lorsqu'il est utilisé comme prévu et dans des conditions de mauvaise utilisation qui sont raisonnablement prévisibles par le fabricant.
Ces prescriptions sont supplémentaires à celles fixées dans l’EN ISO 3691-5:2015 avec l’ajout des prescriptions pour les phénomènes dangereux suivants :
- Immunité électromagnétique (rayonnement externe) ;
Le présent document remplace partiellement les prescriptions suivantes de l’EN ISO 3691-5:2015 :
- Prescriptions électriques.
Le présent document définit des prescriptions supplémentaires à l’EN ISO 3691-5:2015 :
- protection contre l’écrasement, le cisaillement et l’emprisonnement ;
- informations pour l’utilisation (notice d’instruction et marquage) ;
- lors du fonctionnement en atmosphère explosible.
Le présent document ne définit pas de prescriptions supplémentaires à l’EN ISO 3691-5:2015 :
- Électricité statique ;
- Radiation ;
- Principes généraux de rédaction des instructions ;
- Documentation commerciale.
L’Annexe A (informative) contient la liste des phénomènes dangereux significatifs couverts par le présent document.
Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne zahteve za vozila, ki jih poganja pešec
Ta dokument podaja zahteve za vrste vozil za talni transport, ki so navedene v okviru standarda EN ISO 3691-5:2015.
Ta dokument je treba uporabljati v povezavi s standardom EN ISO 3691-5:2015.
Ta dokument opisuje naslednje večje nevarnosti, nevarne situacije in nevarne dogodke v okoliščinah uporabe v skladu z namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec.
Te zahteve dopolnjujejo zahteve iz standarda EN ISO 3691-5:2015 in dodatno obravnavajo naslednja tveganja:
– elektromagnetna odpornost (zunanje sevanje).
Ta dokument delno nadomešča naslednje zahteve standarda EN ISO 3691-5:2015:
– električne zahteve.
Ta dokument določa dodatne zahteve za standard EN ISO 3691-5:2015:
– zaščita pred zdrobitvijo, urezninami in ukleščenjem;
– informacije za uporabo (priročnik za uporabo in označevanje);
– pri upravljanju v potencialno eksplozivnih atmosferah.
Ta dokument ne določa dodatnih zahtev za standard EN ISO 3691-5:2015:
– statična elektrika;
– sevanje;
– splošna načela za izdelavo osnutka navodil;
– prodajna literatura.
Dodatek A (informativni) vsebuje seznam večjih tveganj, ki jih zajema ta dokument.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16307-5:2024
01-maj-2024
Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne
zahteve za vozila, ki jih poganja pešec
Industrial trucks - Safety requirements and verification - Part 5: Supplementary
requirements for pedestrian-propelled trucks
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5:
Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge
Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : Exigences
supplémentaires pour les chariots à conducteur accompagnant
Ta slovenski standard je istoveten z: EN 16307-5:2023
ICS:
53.060 Industrijski tovornjaki Industrial trucks
SIST EN 16307-5:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16307-5:2024
---------------------- Page: 2 ----------------------
SIST EN 16307-5:2024
EN 16307-5
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2023
EUROPÄISCHE NORM
ICS 53.060 Supersedes EN 16307-5:2013
English Version
Industrial trucks - Safety requirements and verification -
Part 5: Supplementary requirements for pedestrian-
propelled trucks
Chariots de manutention - Exigences de sécurité et Flurförderzeuge - Sicherheitstechnische
vérification - Partie 5 : Exigences supplémentaires pour Anforderungen und Verifizierung - Teil 5: Zusätzliche
les chariots à conducteur accompagnant Anforderungen für mitgängerbetriebene
Flurförderzeuge
This European Standard was approved by CEN on 20 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16307-5:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 16307-5:2024
EN 16307-5:2023 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Safety requirements and/or protective/risk reduction measures . 7
4.1 General. 7
4.2 Protection against crushing, shearing and trapping . 7
4.2.1 General. 7
4.2.2 Pedestrian-propelled trucks with mast . 7
4.3 Electrical requirements . 7
4.4 Electromagnetic immunity . 7
5 Verification of safety requiremen
...
SLOVENSKI STANDARD
oSIST prEN 16307-5:2022
01-februar-2022
Vozila za talni transport - Varnostne zahteve in preverjanje - 5. del: Dodatne
zahteve za vozila, ki jih poganja pešec
Industrial trucks - Safety requirements and verification - Part 5: Supplementary
requirements for pedestrian-propelled trucks
Flurförderzeuge - Sicherheitstechnische Anforderungen und Verifizierung - Teil 5:
Zusätzliche Anforderungen für mitgängerbetriebene Flurförderzeuge
Chariots de manutention - Exigences de sécurité et vérification - Partie 5 : Exigences
supplémentaires pour les chariots à conducteur accompagnant
Ta slovenski standard je istoveten z: prEN 16307-5
ICS:
53.060 Industrijski tovornjaki Industrial trucks
oSIST prEN 16307-5:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 16307-5:2022
---------------------- Page: 2 ----------------------
oSIST prEN 16307-5:2022
DRAFT
EUROPEAN STANDARD
prEN 16307-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 53.060 Will supersede EN 16307-5:2013
English Version
Industrial trucks - Safety requirements and verification -
Part 5: Supplementary requirements for pedestrian-
propelled trucks
Chariots de manutention - Exigences de sécurité et Flurförderzeuge - Sicherheitstechnische
vérification - Partie 5 : Exigences supplémentaires pour Anforderungen und Verifizierung - Teil 5: Zusätzliche
les chariots à conducteur accompagnant Anforderungen für mitgängerbetriebene
Flurförderzeuge
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 150.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16307-5:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16307-5:2022
prEN 16307-5:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Safety requirements and/or protective/risk reduction measures . 7
5 Verification of safety requirements and/or protective/risk reduction measures . 8
6 Information for use . 8
Annex A (informative) List of significant hazards . 9
Annex ZA (informative) Relationship between this European Standard and the essential
requiremen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.