SIST EN ISO 10322-2:2016

Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for progressive-power and degressive-power lens blanks (ISO 10322-2:2016)

This part of ISO 10322 specifies requirements for the optical and geometrical properties of semifinished
lens blanks with finished progressive-power and degressive-power surfaces.

Augenoptik - Einseitig fertige Brillenglasblanks - Teil 2: Anforderungen an Gleitsicht-Brillenglasblanks (ISO 10322-2:2016)

Dieser Teil von ISO 10322 legt Anforderungen an die optischen und geometrischen Eigenschaften von ein-seitig fertigen Brillenglasblanks mit fertiger Gleitsichtfläche sowie mit fertiger degressiver Fläche fest.

Optique ophtalmique - Verres de lunettes semi-finis - Partie 2: Spécifications pour les verres progressifs et dégressifs (ISO 10322-2:2016)

ISO 10322-2:2016 spécifie les exigences relatives aux propriétés optiques et géométriques des verres semi-finis à surface finie progressive et dégressive.

Očesna optika - Napol zgotovljena stekla očal - 2. del: Specifikacije za povečanje ali zmanjšanje jakosti stekel očal (ISO 10322-2:2016)

Ta del standarda ISO 10322 določa zahteve za optične in geometrične lastnosti napol zgotovljenih stekel očal z zgotovljenimi površinami, ki povečajo in zmanjšajo jakost stekel.

General Information

• Status: Published
• Public Enquiry End Date: 15-Jun-2014
• Publication Date: 19-May-2016
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: VAZ - Healthcare
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 31-Mar-2016
• Due Date: 05-Jun-2016
• Completion Date: 20-May-2016
• Ref Project: EN ISO 10322-2:2016 - Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for progressive-power and degressive-power lens blanks (ISO 10322-2:2016)

Relations

• Replaces: SIST EN ISO 10322-2:2006 - Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for progressive power lens blanks (ISO 10322-2:2006)
• Effective Date: 01-Jun-2016
• Replaces: SIST EN ISO 10322-2:2006 - Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for progressive power lens blanks (ISO 10322-2:2006)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10322-2:2016
01-junij-2016
1DGRPHãþD
SIST EN ISO 10322-2:2006
2þHVQDRSWLND1DSRO]JRWRYOMHQDVWHNODRþDOGHO6SHFLILNDFLMH]DSRYHþDQMH
DOL]PDQMãDQMHMDNRVWLVWHNHORþDO,62
Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2: Specifications for
progressive-power and degressive-power lens blanks (ISO 10322-2:2016)
Augenoptik - Einseitig fertige Brillenglasblanks - Teil 2: Anforderungen an Gleitsicht-
Brillenglasblanks (ISO 10322-2:2016)
Optique ophtalmique - Verres de lunettes semi-finis - Partie 2: Spécifications pour les
verres progressifs et dégressifs (ISO 10322-2:2016)
Ta slovenski standard je istoveten z: EN ISO 10322-2:2016
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 10322-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10322-2:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 10322-2:2016


EN ISO 10322-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2016
EUROPÄISCHE NORM
ICS 11.040.70 Supersedes EN ISO 10322-2:2006
English Version

Ophthalmic optics - Semi-finished spectacle lens blanks -
Part 2: Specifications for progressive-power and
degressive-power lens blanks (ISO 10322-2:2016)
Optique ophtalmique - Verres de lunettes semi-finis - Augenoptik - Einseitig fertige Brillenglasblanks - Teil 2:
Partie 2: Spécifications pour les verres progressifs et Anforderungen an Gleitsicht-Brillenglasblanks und
dégressifs (ISO 10322-2:2016) Brillenglasblanks für degressive Brillengläser (ISO
10322-2:2016)
This European Standard was approved by CEN on 2 January 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10322-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10322-2:2016
EN ISO 10322-2:2016 (E)
Contents Page
European Foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10322-2:2016
EN ISO 10322-2:2016 (E)
European Foreword
This document (EN ISO 10322-2:2016) has been prepared by Technical Committee ISO/TC 172 “Optics
and photonics” in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2016, and conflicting national standards
shall be withdrawn at the latest by September 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 10322-2:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10322-2:2016 has been approved by CEN as EN ISO 10322-2:2016 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 10322-2:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 10322-2:2016
INTERNATIONAL ISO
STANDARD 10322-2
Fourth edition
2016-03-01
Ophthalmic optics — Semi-finished
spectacle lens blanks —
Part 2:
Specifications for progressive-power
and degressive-power lens blanks
Optique ophtalmique — Verres de lunettes semi-finis —
Partie 2: Spécifications pour les verres progressifs et dégressifs
Reference number
ISO 10322-2:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------

SIST EN ISO 10322-2:2016
ISO 10322-2:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 10322-2:2016
ISO 10322-2:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 1
5 Requirements . 1
5.1 General . 1
5.2 Optical requirements for the finished surface . 1
5.2.1 General. 1
5.2.2 Tolerances on the surface power . 2
5.2.3 Tolerances on the surface addition power for progressive-power lens blanks . 2
5.3 Geometrical tolerances . 2
5.3.1 Tolerances on the size . 2
5.3.2 Tolerances on thickness . . 3
5.4 Orientation requirement for polarizing lens blanks. 3
6 Test methods . 3
6.1 General . 3
6.2 Determination of surface power . 3
6.3 Surface addition power measurement for progressive-power lens blanks . 3
6.3.1 General. 3
6.3.2 Measurement . 4
6.4 Inspection method for material and surface quality . 4
7 Marking and identification . 4
7.1 Marking . 4
7.1.1 Permanent marking . 4
7.1.2 Optional non-permanent marking . 4
7.2 Identification required on the package . 4
7.3 Information to be made available . 5
8 Reference to this part of ISO 10322 . 5
Annex A (informative) Material and surface quality. 6
Annex B (informative) Conversion of surface power tolerances from the refractive index of
the lens blank to that of an instrument’s fixed reference . 7
Annex C (informative) Addition power measurement by transmission . 8
Bibliography . 9
© ISO 2016 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 10322-2:2016
ISO 10322-2:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information.
The committee responsible for this document is ISO/TC 172, Optics and photonics, Subcommittee SC 7,
Ophthalmic optics and instruments.
This fourth edition cancels and replaces the third edition (ISO 10322-2:2006), which has been
technically revised.
ISO 10322 consists of the following parts, under the general title Ophthalmic optics — Semi-finished
spectacle lens blanks:
— Part 1: Specifications for single-vision and multifocal lens blanks
— Part 2: Specifications for progressive-power and degressive-power lens blanks
iv © ISO 2016 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 10322-2:2016
ISO 10322-2:2016(E)

Introduction
Compared with previous editions of this part of ISO 10322, the scope now includes degressive-power
semi-finished lens blanks.
© ISO 2016 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 10322-2:2016

---------------------- Page: 12 ----------------------

SIST EN ISO 10322-2:2016
INTERNATIONAL STANDARD ISO 10322-2:2016(E)
Ophthalmic optics — Semi-finished spectacle lens
blanks —
Part 2:
Specifications for progressi
...