oSIST prEN ISO 10563:2023

Building and civil engineering sealants - Determination of change in mass and volume (ISO/FDIS 10563:2023)

ISO 10563:2017 specifies a method for the determination of the change of mass and the change of volume of self-levelling and non-sagging sealants used in joints in building construction.

Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO/FDIS 10563:2023)

Bâtiments et ouvrages de génie civil — Mastics — Détermination des variations de masse et de volume (ISO/FDIS 10563:2023)

ISO 10563:2017 spécifie une méthode pour la détermination des variations de masse et de volume des mastics autonivelants et non coulables utilisés dans des joints dans la construction immobilière.

Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje spremembe mase in prostornine (ISO/FDIS 10563:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 24-May-2023
• ICS: 17.060 - Measurement of volume, mass, density, viscosity
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: ISS SPL.GPO - Building construction
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Aug-2023
• Due Date: 06-Oct-2023
• Ref Project: EN ISO 10563:2023 - Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)

Relations

• Revises: SIST EN ISO 10563:2017 - Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 10563:2023
01-maj-2023
Tesnilne mase za stavbe in gradbene inženirske objekte - Ugotavljanje spremembe
mase in prostornine (ISO/FDIS 10563:2023)

Building and civil engineering sealants - Determination of change in mass and volume

(ISO/FDIS 10563:2023)
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen
(ISO/FDIS 10563:2023)

Bâtiments et ouvrages de génie civil Mastics Détermination des variations de masse et

de volume (ISO/FDIS 10563:2023)
Ta slovenski standard je istoveten z: prEN ISO 10563
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN ISO 10563:2023 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10563:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10563:2023
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10563
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of change
Voting begins on:
2023-03-03 in mass and volume
Voting terminates on:
2023-05-26
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 10563:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10563:2023
ISO/FDIS 10563:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10563
ISO/TC 59/SC 8
Building and civil engineering
Secretariat: SAC
sealants — Determination of change
Voting begins on:
in mass and volume
Voting terminates on:
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 10563:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
© ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10563:2023
ISO/FDIS 10563:2023(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Terms and definitions .................................................................................................................................................................................... 1

4 Principle ........................................................................................................................................................................................................................ 1

5 Apparatus and materials ............................................................................................................................................................................1

6 Preparation of test specimens .............................................................................................................................................................. 2

6.1 For non­sagging sealant ................................................................................................................................................................. 2

6.2 For self­levelling sealant ................................................................................................................................................................ 2

7 Test procedure .......................................................................................................................................................................................................3

7.1 General ........................................................................................................................................................................................................... 3

7.2 Preconditioning ..................................................................................................................................................................................... 3

7.3 Specific conditioning ......................................................................................................................................................................... 3

8 Calculation and expression of results ........................................................................................................................................... 3

8.1 Change in mass ....................................................................................................................................................................................... 3

8.2 Change in volume ................................................................................................................................................................................. 4

9 Test report .................................................................................................................................................................................................................. 4

iii
© ISO 2023 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 10563:2023
ISO/FDIS 10563:2023(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non­governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO’s adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 59, Buildings and civil engineering works,

Subcommittee SC 8, Sealants, in collaboration with the European Committee for Standardization

(CEN) Technical Committee CEN/SS B02, Structures, in accordance with the Agreement on technical

cooperation between ISO and CEN (Vienna Agreement).

This fourth edition cancels and replaces the third edition (ISO 10563:2017), of which it constitutes a

minor revision. The changes are as follows:
— the title has been revised from Buildings and
...