iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 23327:2000

(Main)

Hardmetals - Determination of transverse rupture strength (ISO 3327:1982)

Hardmetals - Determination of transverse rupture strength (ISO 3327:1982)

Gives the requirements for industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based upon thermosetting resins for electrical purposes.
Applications and distinguishing properties are given.
Definitions, designations, abbreviations and general requirements for the different types are given in IEC 62011-1.

Hartmetalle - Bestimmung der Biegebruchfestigkeit (ISO 3327:1982)

Métaux-durs - Détermination de la résistance a la flexion (ISO 3327:1982)

Donne les exigences pour les tubes industriels, rigides, moulés, stratifiés, et les barres de sections transversales rectangulaires ou hexagonales, à base de résines thermodurcissables, à usages électriques.
Les applications et les propriétés distinctives sont données.
Les définitions, désignations et abréviations ainsi que les exigences générales concernant les différents types sont données dans la CEI 62011-1.

Hardmetals - Determination of transverse rupture strength (ISO 3327:1982)

General Information

Status
Withdrawn
Publication Date
30-Nov-2000
Withdrawal Date
21-May-2009
ICS
77.040.10 - Mechanical testing of metals
77.160 - Powder metallurgy
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
22-May-2009
Due Date
14-Jun-2009
Completion Date
22-May-2009
Ref Project
EN 23327:1993 - Hardmetals - Determination of transverse rupture strength (ISO 3327:1982)

Relations

Replaced By
SIST EN ISO 3327:2009 - Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
Effective Date
01-Jul-2009
Replaced By
SIST EN ISO 3327:2009 - Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
Effective Date
08-Jun-2022

Buy Standard

EN 23327:2000EN 23327:2000
PreviousNext
Standard
EN 23327:2000
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 3995:2023(Main)
Metallic powders - Determination of green strength by transverse rupture of rectangular compacts (ISO 3995:2023)
EN ISO 3995:2023

This second edition cancels and replaces the first edition (i. e. ISO 3995:1977). The method subjects a compact pressed form metallic powder to a uniformly increasing transverse force under controlled conditions until fracture occurs. the green strength is determined on compacts either having a particular density or after compaction at a specific compacting pressure.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28080:2021(Main)
Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
EN ISO 28080:2021

This document specifies a generic test method to determine the abrasion wear characteristics of
hardmetals.
The test is appropriate for use in situations where test laboratories have a need to simulate abrasive
damage. The procedure includes information which enables the test to be used in a variety of different
conditions:
a) with counterface wheels of different stiffness (for example steel and rubber);
b) wet and dry;
c) different abrasive sizes;
d) different chemical environments.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4884:2020(Main)
Hardmetals - Sampling and testing of powders using sintered test pieces (ISO 4884:2019)
EN ISO 4884:2019

This document specifies procedures for the sampling and testing of powder mixtures for the manufacture of hardmetals, using sintered test pieces. It also covers the preparation of test pieces.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4489:2020(Main)
Hardmetals - Sampling and testing (ISO 4489:2019)
EN ISO 4489:2019

This document specifies procedures for sampling and testing of hardmetals for the determination of their physical and mechanical characteristics.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4506:2018(Main)
Hardmetals - Compression test (ISO 4506:2018)
EN ISO 4506:2018

This document specifies a method of determining the ultimate strength and proof stress of cemented
carbide under uniaxial compressive loads.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5754:2018(Main)
Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2017)
EN ISO 5754:2017

This document specifies the dimensions of an unnotched impact test piece of sintered metal materials.
The test piece may be obtained directly by pressing and sintering or by machining a sintered part.
This document applies to all sintered metals and alloys, with the exception of hardmetals. However, for
certain materials (for example, materials with low porosity or materials with high ductility), it may be
more appropriate to use a notched test piece which, in this case, will give results with less scatter. (In
this case, refer to ISO 148-1.)
NOTE For porous sintered materials, the results obtained from impact tests are not necessarily very
accurate compared with results obtained from tests on solid metals.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3928:2017(Main)
Sintered metal materials, excluding hardmetals - Fatigue test pieces (ISO 3928:2016)
EN ISO 3928:2016

This document specifies
— the die cavity dimensions used for making fatigue test pieces by pressing and sintering, together
with certain dimensions of the test piece obtained from such a die, and
— the dimensions of the test pieces machined from sintered and powder forged materials.
This document is applicable to all sintered metals and alloys, excluding hardmetals.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4498:2010(Main)
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010)
EN ISO 4498:2010

This International Standard specifies methods of hardness testing of sintered metal materials, excluding hardmetals. Procedure 1 determines the apparent hardness of the whole material. Procedure 1 - applies to sintered metal materials which have either not been subjected to any heat treatment, or which have been heat treated in such a way that the hardness is essentially uniform to a depth of at least 5 mm below the surface, - applies to the surfaces of sintered metal materials which have been treated in such a way that the hardness is not uniform in the section to a depth of 5 mm below the surface, - therefore applies to materials in which the hardness is obtained essentially by surface enrichment by carbon, or by carbon and nitrogen (for example by carburizing, carbonitriding, nitrocarburizing or sulfidizing), and - applies to materials which have been induction hardened. Procedure 2 determines the microhardness of the metal phase.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3738-1:2010(Main)
Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982)
EN ISO 3738-1:2010

This part of ISO 3738 specifies the Rockwell hardness test (scale A) for hardmetals.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2740:2009(Main)
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009)
EN ISO 2740:2009

This International Standard is applicable to all sintered metals and alloys, excluding hardmetals. This International Standard specifies: - the die cavity dimensions used for making tensile test pieces by pressing and sintering, and by Metal Injection Moulding (MIM) and sintering; - the dimensions of tensile test pieces machined from sintered and powder forged materials.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day