SIST ETS 300 372:1999
(Main)Radio Equipment and Systems (RES); Technical characteristics and methods of measurement for maritime float-free satellite Emergency Position Indicating Radio Beacon (EPIRB) operating in the 1,6 GHz band through geostationary satellites
Radio Equipment and Systems (RES); Technical characteristics and methods of measurement for maritime float-free satellite Emergency Position Indicating Radio Beacon (EPIRB) operating in the 1,6 GHz band through geostationary satellites
To draft an ETS for equipment to be used in the maritime mobile service.
Radijska oprema in sistemi (RES) - Tehnične karakteristike in merilne metode za pomorske prosto plavajoče satelitske javljalnike kraja nuje (EPIRB), ki obratujejo v pasu 1,6 Ghz preko geostacionarnih satelitov
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Radio Equipment and Systems (RES); Technical characteristics and methods of measurement for maritime float-free satellite Emergency Position Indicating Radio Beacon (EPIRB) operating in the 1,6 GHz band through geostationary satellites33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETS 300 372 E13SIST ETS 300 372:1999en01-PDUHF-19993SIST ETS 300 372:1999SLOVENSKI
STANDARD
SIST ETS 300 372:1999
EUROPEANETS 300 372TELECOMMUNICATIONMay 1996STANDARDSource: ETSI TC-RESReference: DE/RES-01009ICS:33.060.20Key words:EPIRB, maritime, radio, satelliteRadio Equipment and Systems (RES);Technical characteristics and methods of measurement formaritime float-free satellite Emergency Position Indicating RadioBeacon (EPIRB) operating in the 1,6 GHz bandthrough geostationary satellitesETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 372:1999
Page 2ETS 300 372: May 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 372:1999
Page 3ETS 300 372: May 1996ContentsForeword.71Scope.92Normative references.93Definitions and abbreviations.103.1Definitions.103.2Abbreviations.104General requirements.104.1Scope.104.2Operating conditions.114.3Remote control.114.4Accessories.114.5Mechanical and electrical construction.114.6Indication of activation.124.7Lanyard.124.8Colour and surface quality.124.9Low duty cycle light.124.10Frequencies.124.11Controls.124.11.1General.124.11.2Manual activation and deactivation.124.11.3Satellite EPIRB test.134.12Labelling.134.13Operating instructions.134.14Power source.144.15Antenna characteristics.145Test conditions, power sources and ambient temperatures.145.1General.145.2Test fixture.145.3Test power source.155.4Normal test conditions.155.4.1Normal temperature and humidity.155.4.2Normal test voltage.155.5Extreme test conditions.155.5.1Extreme temperatures.155.5.1.1Upper extreme temperature.155.5.1.2Lower extreme temperature.155.5.2Extreme test voltages.155.5.2.1Upper extreme test voltages.155.5.2.2Lower extreme test voltage.155.6Procedure for tests at extreme temperatures.155.7Test sequence.155.8Test frequencies.165.9Measurement uncertainty.166Environmental tests.166.1General.166.2Performance check.166.3Vibration test.176.3.1Definition.176.3.2Method of measurement.176.3.3Requirement.176.4Temperature tests.17SIST ETS 300 372:1999
Page 4ETS 300 372: May 19966.4.1Definition.176.4.2Dry heat cycle.186.4.2.1Internally mounted equipment.186.4.2.1.1Method of measurement.186.4.2.1.2Requirement.186.4.2.2Externally mounted equipment.186.4.2.2.1Method of measurement.186.4.2.2.2Requirement.186.4.3Damp heat cycle.186.4.3.1Method of measurement.186.4.3.2Requirement.196.4.4Low temperature cycle.196.4.4.1Internally mounted equipment.196.4.4.1.1Method of measurement.196.4.4.1.2Requirement.196.4.4.2Externally mounted equipment.196.4.4.2.1Method of measurement.196.4.4.2.2Requirement.196.5Ruggedness test.206.5.1Definition.206.5.2Method of measurement.206.5.3Requirements.206.6Hose stream test.206.6.1Definition.206.6.2Method of measurement.206.6.3Requirements.206.7Buoyancy test.206.7.1Definition.206.7.2Method of measurement.216.7.3Requirements.216.8Stability test.216.8.1Definition.216.8.2Method of measurement.216.8.3Limit.216.9Corrosion test.216.9.1Definition.216.9.2Method of measurement.216.9.3Requirements.226.10Drop test into water.226.10.1Definition.226.10.2Method of measurement.226.10.3Requirement.226.11Immersion test.226.11.1Definition.226.11.2Method of measurement.226.11.3Requirement.236.12Thermal shock.236.12.1Definition.236.12.2Method of measurement.236.12.3Requirement.236.13Solar radiation test.236.13.1Definition.236.13.2Method of measurement.236.13.3Requirements.246.14Oil resistance test.246.14.1Definition.246.14.2Method of measurement.246.14.3Requirements.246.15Antenna mismatch.256.15.1Definition.256.15.2Method of measurement.256.15.3Requirement.25SIST ETS 300 372:1999
Page 5ETS 300 372: May 19967Transmitter.257.1Carrier frequency.257.1.1Definition.257.1.2Method of measurement.257.1.3Limit.257.2Radiated power.257.2.1Definition.257.2.2Method of measurement.267.2.3Limit.267.3Power in test fixture.267.3.1Definition.267.3.2Method of measurement.267.3.3Limit.267.4Spurious emissions.267.4.1Definition.267.4.2Method of measurement.277.4.3Limit.277.5Frequency shift.277.5.1Definition.277.5.2Method of measurement.277.5.3Limit.277.6Bit-clock stability.277.6.1Definition.277.6.2Method of measurement.277.6.3Limit.277.7Transmission period.287.7.1Definition.287.7.2Method of measurement.287.7.3Limit.287.8Effective luminous intensity of the low duty cycle light.287.8.1Definition.287.8.2Method of measurement.287.8.3Limit.288Release mechanism.288.1General.288.1.1Design requirements.288.1.2Operation.298.1.3Temperature range.298.1.4Labelling.298.2Automatic release of the satellite EPIRB.298.2.1Definition.298.2.2Method of measurement.298.2.3Requirement.30Annex A (normative):121,5 MHz Homing Transmitter.31A.1General.31A.1.1Class of emission.31A.1.2Modulation frequency.31A.1.3Transmitter duty cycle.31A.1.4Sweep repetition rate.31A.2Frequency error.31A.2.1Definition.31A.2.2Method of measurement.31A.2.3Limit.31A.3Modulation duty cycle.31A.3.1Definition.31A.3.2Method of measurement.31A.3.3Limit.32SIST ETS 300 372:1999
Page 6ETS 300 372: May 1996A.4Modulation factor.32A.4.1Definition.32A.4.2Method of measurement.32A.4.3Limit.32A.5Peak effective radiated power.32A.5.1Definition.32A.5.2Method of measurement.32A.5.3Limit.32A.6Spurious emissions.33A.6.1Definition.33A.6.2Method of measurement.33A.6.3Limit.33History.34SIST ETS 300 372:1999
Page 7ETS 300 372: May 1996ForewordThis European Telecommunication Standard (ETS) has been produced by the Radio Equipment andSystems (RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).Transposition datesDate of adoption of this ETS:31 May 1996Date of latest announcement of this ETS (doa):31 August 1996Date of latest publication of new National Standardor endorsement of this ETS (dop/e):29 February 1997Date of withdrawal of any conflicting National Standard (dow):29 February 1997Every ETS prepared by ETSI is a voluntary standard. This ETS contains text concerning conformancetesting of the equipment to which it relates. This text should be considered only as guidance and does notmake this ETS mandatory.SIST ETS 300 372:1999
Page 8ETS 300 372: May 1996Blank pageSIST ETS 300 372:1999
Page 9ETS 300 372: May 19961ScopeThis European Telecommunication Standard ETS specifies the minimum performance requirements,technical characteristics and conformance testing requirements of a satellite Emergency PositionIndicating Radio Beacon (EPIRB) operating in the Inmarsat geostationary satellite system as described inRegulation IV subclause 7.1.6 of the 1988 amendments to the 1974 International Convention for Safety ofLife at Sea (SOLAS) [2].The requirements of this ETS are in addition to the requirements of Inmarsat-E System DefinitionManual [11].This ETS comprises the relevant requirements of the Radio Regulations [1], International MaritimeOrganisation (IMO) Resolutions A.658(16) [3], A.661(16) [4], A.662(16) [5], A.689(17) [6], A.694(17) [7],A.702(17) [8], ITU-R Recommendation M.632-2 [9], and Regulation IV-7.1.6 of the 1988 amendments tothe 1974 SOLAS Convention [2].This ETS covers the following categories of satellite EPIRBs and release mechanism:-satellite EPIRB with position updating from the ship's navigational installation and with an integral9 GHz radar transponder;-satellite EPIRB with position updating from an integral facility for automatic position updating;-additionally, the satellite EPIRB may include a 121,5 MHz homing transmitter.To further meet the requirements of Regulation IV subclauses 10.1.4.3 and 10.2.3.2.2 of the 1988amendments to the 1974 SOLAS Convention [2], with regard to remote activation for both categories, anadditional remote control unit for remote activation and for feeding the satellite EPIRB with "nature ofdistress" information is specified.2Normative referencesThis European Telecommunication Standard ETS incorporates by dated or undated reference provisionsfrom other publications. These normative references are cited at the appropriate place in the text and thepublications are listed hereafter. For dated references, subsequent amendments to or revisions of any ofthese publications apply to this ETS only when incorporated in it by amendment or revision. For undatedreferences the latest edition of the publication referred to applies.[1]International Telecommunication Union: "Radio Regulations".[2]International Convention for Safety Of Life At Sea Convention (SOLAS) (1974),as amended 1988 (GMDSS).[3]IMO Resolution A.658(16): "Use and fitting of retro-reflective materials onlife-saving appliances".[4]IMO Resolution A.661(16): "Performance for float free satellite emergencyposition-indicating radio beacons operating through the geostationaryINMARSAT satellite system on 1,6 GHz".[5]IMO Resolution A.662(16): "Performance standards for float free release andactivation arrangements for emergency radio equipment".[6]IMO Resolution A.689(17): "Testing of life-saving appliances".[7]IMO Resolution A.694(17): "General requirements for ship borne radioequipment forming part of the Global Maritime Distress and Safety System(GMDSS) and for electronic navigational aids".[8]IMO Resolution A.702(17): "Radio maintenance guidelines for the GlobalMaritime Distress and Safety System (GMDSS) related to sea areas A3 andA4".SIST ETS 300 372:1999
Page 10ETS 300 372: May 1996[9]ITU-R Recommendation M.632-2: "Transmission characteristics of a satelliteemergency position-indicating radiobeacon (satellite EPIRB) system operatingthrough geostationary satellites in the 1,6 GHz band".[10]ISO Recommendation 694: Method B.[11]Inmarsat-E System Definition Manual.[12]ETR 028: "Radio Equipment and Systems (RES); Uncertainties in themeasurement of mobile radio equipment characteristics".3Definitions and abbreviations3.1DefinitionsFor the purposes of this ETS, the following definitions apply:satellite EPIRB: Earth station in the Mobile Satellite Service (MSS) the emissions of which are intendedto facilitate Search and Rescue (SAR) operations.remote control unit: A unit which allows the satellite EPIRB, while mounted in the release mechanism, tobe activated from a position other than its installation point.release mechanism: A fixture which allows the satellite EPIRB to float free automatically.equipment: A satellite EPIRB, its release mechanism and the remote control unit.internally mounted equipment: Units of the equipment, e.g. remote control unit, intended for internal(inside) mounting.externally mounted equipment: Units of the equipment intended for external (outside) mounting.3.2AbbreviationsFor the purposes of this ETS, the following abbreviations apply:eirpeffective isotropically radiated powerEPIRBEmergency Position Indicating Radio BeaconFSKFrequency Shift KeyingGMDSSGlobal Maritime Distress and Safety SystemIMOInternational Maritime OrganisationInmarsatInternational Mobile Satellite OrganizationMSSMobile Satellite ServiceMMSIMaritime Mobile Station Identitynmnautical milePERPPeak Effective Radiated PowerRHCPRight Hand Circular PolarisedSARSearch and RescueSARTSearch and Rescue Radar TransponderSOLASInternational Convention for Safety of Life at Sea4General requirements4.1ScopeT
...
SLOVENSKI STANDARD
SIST ETS 300 372:1999
01-julij-1999
5DGLMVNDRSUHPDLQVLVWHPL 5(6 7HKQLþQHNDUDNWHULVWLNHLQPHULOQHPHWRGH]D
SRPRUVNHSURVWRSODYDMRþHVDWHOLWVNHMDYOMDOQLNHNUDMDQXMH (3,5% NLREUDWXMHMRY
SDVX*K]SUHNRJHRVWDFLRQDUQLKVDWHOLWRY
Radio Equipment and Systems (RES); Technical characteristics and methods of
measurement for maritime float-free satellite Emergency Position Indicating Radio
Beacon (EPIRB) operating in the 1,6 GHz band through geostationary satellites
Ta slovenski standard je istoveten z: ETS 300 372 Edition 1
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
SIST ETS 300 372:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 372:1999
---------------------- Page: 2 ----------------------
SIST ETS 300 372:1999
EUROPEAN ETS 300 372
TELECOMMUNICATION May 1996
STANDARD
Source: ETSI TC-RES Reference: DE/RES-01009
ICS: 33.060.20
EPIRB, maritime, radio, satellite
Key words:
Radio Equipment and Systems (RES);
Technical characteristics and methods of measurement for
maritime float-free satellite Emergency Position Indicating Radio
Beacon (EPIRB) operating in the 1,6 GHz band
through geostationary satellites
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
*
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 372:1999
Page 2
ETS 300 372: May 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 372:1999
Page 3
ETS 300 372: May 1996
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 Definitions and abbreviations .10
3.1 Definitions .10
3.2 Abbreviations .10
4 General requirements .10
4.1 Scope.10
4.2 Operating conditions.11
4.3 Remote control .11
4.4 Accessories .11
4.5 Mechanical and electrical construction .11
4.6 Indication of activation .12
4.7 Lanyard .12
4.8 Colour and surface quality .12
4.9 Low duty cycle light .12
4.10 Frequencies .12
4.11 Controls.12
4.11.1 General.12
4.11.2 Manual activation and deactivation .12
4.11.3 Satellite EPIRB test .13
4.12 Labelling.13
4.13 Operating instructions.13
4.14 Power source.14
4.15 Antenna characteristics .14
5 Test conditions, power sources and ambient temperatures .14
5.1 General .14
5.2 Test fixture .14
5.3 Test power source .15
5.4 Normal test conditions .15
5.4.1 Normal temperature and humidity.15
5.4.2 Normal test voltage .15
5.5 Extreme test conditions .15
5.5.1 Extreme temperatures.15
5.5.1.1 Upper extreme temperature .15
5.5.1.2 Lower extreme temperature .15
5.5.2 Extreme test voltages.15
5.5.2.1 Upper extreme test voltages.15
5.5.2.2 Lower extreme test voltage .15
5.6 Procedure for tests at extreme temperatures.15
5.7 Test sequence .15
5.8 Test frequencies .16
5.9 Measurement uncertainty .16
6 Environmental tests.16
6.1 General .16
6.2 Performance check.16
6.3 Vibration test.17
6.3.1 Definition .17
6.3.2 Method of measurement .17
6.3.3 Requirement.17
6.4 Temperature tests.17
---------------------- Page: 5 ----------------------
SIST ETS 300 372:1999
Page 4
ETS 300 372: May 1996
6.4.1 Definition. 17
6.4.2 Dry heat cycle . 18
6.4.2.1 Internally mounted equipment. 18
6.4.2.1.1 Method of measurement . 18
6.4.2.1.2 Requirement. 18
6.4.2.2 Externally mounted equipment. 18
6.4.2.2.1 Method of measurement . 18
6.4.2.2.2 Requirement. 18
6.4.3 Damp heat cycle . 18
6.4.3.1 Method of measurement. 18
6.4.3.2 Requirement . 19
6.4.4 Low temperature cycle. 19
6.4.4.1 Internally mounted equipment. 19
6.4.4.1.1 Method of measurement . 19
6.4.4.1.2 Requirement. 19
6.4.4.2 Externally mounted equipment. 19
6.4.4.2.1 Method of measurement . 19
6.4.4.2.2 Requirement. 19
6.5 Ruggedness test . 20
6.5.1 Definition. 20
6.5.2 Method of measurement. 20
6.5.3 Requirements . 20
6.6 Hose stream test. 20
6.6.1 Definition. 20
6.6.2 Method of measurement. 20
6.6.3 Requirements . 20
6.7 Buoyancy test. 20
6.7.1 Definition. 20
6.7.2 Method of measurement. 21
6.7.3 Requirements . 21
6.8 Stability test . 21
6.8.1 Definition. 21
6.8.2 Method of measurement. 21
6.8.3 Limit . 21
6.9 Corrosion test. 21
6.9.1 Definition. 21
6.9.2 Method of measurement. 21
6.9.3 Requirements . 22
6.10 Drop test into water . 22
6.10.1 Definition. 22
6.10.2 Method of measurement. 22
6.10.3 Requirement . 22
6.11 Immersion test. 22
6.11.1 Definition. 22
6.11.2 Method of measurement. 22
6.11.3 Requirement . 23
6.12 Thermal shock. 23
6.12.1 Definition. 23
6.12.2 Method of measurement. 23
6.12.3 Requirement . 23
6.13 Solar radiation test . 23
6.13.1 Definition. 23
6.13.2 Method of measurement. 23
6.13.3 Requirements . 24
6.14 Oil resistance test. 24
6.14.1 Definition. 24
6.14.2 Method of measurement. 24
6.14.3 Requirements . 24
6.15 Antenna mismatch . 25
6.15.1 Definition. 25
6.15.2 Method of measurement. 25
6.15.3 Requirement . 25
---------------------- Page: 6 ----------------------
SIST ETS 300 372:1999
Page 5
ETS 300 372: May 1996
7 Transmitter .25
7.1 Carrier frequency .25
7.1.1 Definition .25
7.1.2 Method of measurement .25
7.1.3 Limit.25
7.2 Radiated power.25
7.2.1 Definition .25
7.2.2 Method of measurement .26
7.2.3 Limit.26
7.3 Power in test fixture .26
7.3.1 Definition .26
7.3.2 Method of measurement .26
7.3.3 Limit.26
7.4 Spurious emissions.26
7.4.1 Definition .26
7.4.2 Method of measurement .27
7.4.3 Limit.27
7.5 Frequency shift .27
7.5.1 Definition .27
7.5.2 Method of measurement .27
7.5.3 Limit.27
7.6 Bit-clock stability .27
7.6.1 Definition .27
7.6.2 Method of measurement .27
7.6.3 Limit.27
7.7 Transmission period .28
7.7.1 Definition .28
7.7.2 Method of measurement .28
7.7.3 Limit.28
7.8 Effective luminous intensity of the low duty cycle light.28
7.8.1 Definition .28
7.8.2 Method of measurement .28
7.8.3 Limit.28
8 Release mechanism.28
8.1 General .28
8.1.1 Design requirements .28
8.1.2 Operation.29
8.1.3 Temperature range .29
8.1.4 Labelling .29
8.2 Automatic release of the satellite EPIRB .29
8.2.1 Definition .29
8.2.2 Method of measurement .29
8.2.3 Requirement.30
Annex A (normative): 121,5 MHz Homing Transmitter .31
A.1 General.31
A.1.1 Class of emission.31
A.1.2 Modulation frequency.31
A.1.3 Transmitter duty cycle.31
A.1.4 Sweep repetition rate .31
A.2 Frequency error.31
A.2.1 Definition.31
A.2.2 Method of measurement.31
A.2.3 Limit .31
A.3 Modulation duty cycle .31
A.3.1 Definition.31
A.3.2 Method of measurement.31
A.3.3 Limit .32
---------------------- Page: 7 ----------------------
SIST ETS 300 372:1999
Page 6
ETS 300 372: May 1996
A.4 Modulation factor . 32
A.4.1 Definition . 32
A.4.2 Method of measurement . 32
A.4.3 Limit. 32
A.5 Peak effective radiated power . 32
A.5.1 Definition . 32
A.5.2 Method of measurement . 32
A.5.3 Limit. 32
A.6 Spurious emissions . 33
A.6.1 Definition . 33
A.6.2 Method of measurement . 33
A.6.3 Limit. 33
History. 34
---------------------- Page: 8 ----------------------
SIST ETS 300 372:1999
Page 7
ETS 300 372: May 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Radio Equipment and
Systems (RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
Transposition dates
Date of adoption of this ETS: 31 May 1996
Date of latest announcement of this ETS (doa): 31 August 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 29 February 1997
Date of withdrawal of any conflicting National Standard (dow): 29 February 1997
Every ETS prepared by ETSI is a voluntary standard. This ETS contains text concerning conformance
testing of the equipment to which it relates. This text should be considered only as guidance and does not
make this ETS mandatory.
---------------------- Page: 9 ----------------------
SIST ETS 300 372:1999
Page 8
ETS 300 372: May 1996
Blank page
---------------------- Page: 10 ----------------------
SIST ETS 300 372:1999
Page 9
ETS 300 372: May 1996
1 Scope
This European Telecommunication Standard ETS specifies the minimum performance requirements,
technical characteristics and conformance testing requirements of a satellite Emergency Position
Indicating Radio Beacon (EPIRB) operating in the Inmarsat geostationary satellite system as described in
Regulation IV subclause 7.1.6 of the 1988 amendments to the 1974 International Convention for Safety of
Life at Sea (SOLAS) [2].
The requirements of this ETS are in addition to the requirements of Inmarsat-E System Definition
Manual [11].
This ETS comprises the relevant requirements of the Radio Regulations [1], International Maritime
Organisation (IMO) Resolutions A.658(16) [3], A.661(16) [4], A.662(16) [5], A.689(17) [6], A.694(17) [7],
A.702(17) [8], ITU-R Recommendation M.632-2 [9], and Regulation IV-7.1.6 of the 1988 amendments to
the 1974 SOLAS Convention [2].
This ETS covers the following categories of satellite EPIRBs and release mechanism:
- satellite EPIRB with position updating from the ship's navigational installation and with an integral
9 GHz radar transponder;
- satellite EPIRB with position updating from an integral facility for automatic position updating;
- additionally, the satellite EPIRB may include a 121,5 MHz homing transmitter.
To further meet the requirements of Regulation IV subclauses 10.1.4.3 and 10.2.3.2.2 of the 1988
amendments to the 1974 SOLAS Convention [2], with regard to remote activation for both categories, an
additional remote control unit for remote activation and for feeding the satellite EPIRB with "nature of
distress" information is specified.
2 Normative references
This European Telecommunication Standard ETS incorporates by dated or undated reference provisions
from other publications. These normative references are cited at the appropriate place in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of
these publications apply to this ETS only when incorporated in it by amendment or revision. For undated
references the latest edition of the publication referred to applies.
[1] International Telecommunication Union: "Radio Regulations".
[2] International Convention for Safety Of Life At Sea Convention (SOLAS) (1974),
as amended 1988 (GMDSS).
[3] IMO Resolution A.658(16): "Use and fitting of retro-reflective materials on
life-saving appliances".
[4] IMO Resolution A.661(16): "Performance for float free satellite emergency
position-indicating radio beacons operating through the geostationary
INMARSAT satellite system on 1,6 GHz".
[5] IMO Resolution A.662(16): "Performance standards for float free release and
activation arrangements for emergency radio equipment".
[6] IMO Resolution A.689(17): "Testing of life-saving appliances".
[7] IMO Resolution A.694(17): "General requirements for ship borne radio
equipment forming part of the Global Maritime Distress and Safety System
(GMDSS) and for electronic navigational aids".
[8] IMO Resolution A.702(17): "Radio maintenance guidelines for the Global
Maritime Distress and Safety System (GMDSS) related to sea areas A3 and
A4".
---------------------- Page: 11 ----------------------
SIST ETS 300 372:1999
Page 10
ETS 300 372: May 1996
[9] ITU-R Recommendation M.632-2: "Transmission characteristics of a satellite
emergency position-indicating radiobeacon (satellite EPIRB) system operating
through geostationary satellites in the 1,6 GHz band".
[10] ISO Recommendation 694: Method B.
[11] Inmarsat-E System Definition Man
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.