Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 3: Assessment of sagging, formation of bubbles, pinholing and hiding power (ISO 28199-3:2021)

Beschichtungsstoffe - Beurteilung der durch Spritzapplikation bedingten Eigenschaften von Beschichtungssystemen - Teil 3: Visuelle Beurteilung von Ablaufneigung, Kocherbildung, Nadelstichbildung und Deckvermögen (ISO 28199 3:2021)

Dieses Dokument legt Verfahren zum visuellen Bewerten von Ablaufneigung, Kocherbildung, Nadelstich-bildung und Deckvermögen von Beschichtungsstoffen und Beschichtungen fest, die unter definierten Bedingungen auf Probenplatten appliziert wurden.

Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au mode d'application par pulvérisation - Partie 3: Évaluation du festonnage, de la formation de bulles, des piqûres et du pouvoir masquant (ISO 28199-3:2021)

Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju s prašenjem - 3. del: Vizualno ocenjevanje polzenja, pojava mehurčkov, luknjic in kritnosti (ISO 28199-3:2021)

General Information

Status
Published
Public Enquiry End Date
14-Sep-2020
Publication Date
16-Aug-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
11-Jul-2021
Due Date
15-Sep-2021
Completion Date
17-Aug-2021

RELATIONS

Buy Standard

Standard
SIST EN ISO 28199-3:2021 - BARVE na PDF-str 15,18,19,20,21,22,23,24,25
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
oSIST prEN ISO 28199-3:2020 - BARVE na PDF-str 10,13,14,15,16,17,18,19,20
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 28199-3:2021
01-september-2021
Nadomešča:
SIST EN ISO 28199-3:2010
Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju s
prašenjem - 3. del: Vizualno ocenjevanje polzenja, pojava mehurčkov, luknjic in
kritnosti (ISO 28199-3:2021)

Paints and varnishes - Evaluation of properties of coating systems related to the spray

application process - Part 3: Assessment of sagging, formation of bubbles, pinholing and

hiding power (ISO 28199-3:2021)

Beschichtungsstoffe - Beurteilung der durch Spritzapplikation bedingten Eigenschaften

von Beschichtungssystemen - Teil 3: Visuelle Beurteilung von Ablaufneigung,
Kocherbildung, Nadelstichbildung und Deckvermögen (ISO 28199 3:2021)

Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au

mode d'application par pulvérisation - Partie 3: Évaluation du festonnage, de la formation

de bulles, des piqûres et du pouvoir masquant (ISO 28199-3:2021)
Ta slovenski standard je istoveten z: EN ISO 28199-3:2021
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 28199-3:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 28199-3:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 28199-3:2021
EN ISO 28199-3
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 28199-3:2009
English Version
Paints and varnishes - Evaluation of properties of coating
systems related to the spray application process - Part 3:
Assessment of sagging, formation of bubbles, pinholing
and hiding power (ISO 28199-3:2021)

Peintures et vernis - Évaluation des propriétés des Beschichtungsstoffe - Beurteilung der durch

systèmes de revêtement liées au mode d'application Spritzapplikation bedingten Eigenschaften von

par pulvérisation - Partie 3: Évaluation du festonnage, Beschichtungssystemen - Teil 3: Visuelle Beurteilung

de la formation de bulles, des piqûres et du pouvoir von Ablaufneigung, Kocherbildung, Nadelstichbildung

masquant (ISO 28199-3:2021) und Deckvermögen (ISO 28199 3:2021)
This European Standard was approved by CEN on 6 June 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28199-3:2021 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 28199-3:2021
EN ISO 28199-3:2021 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 28199-3:2021
EN ISO 28199-3:2021 (E)
European foreword

This document (EN ISO 28199-3:2021) has been prepared by Technical Committee ISO/TC 35 "Paints

and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the

secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by December 2021, and conflicting national standards

shall be withdrawn at the latest by December 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 28199-3:2009.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 28199-3:2021 has been approved by CEN as EN ISO 28199-3:2021 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 28199-3:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 28199-3:2021
INTERNATIONAL ISO
STANDARD 28199-3
Second edition
2021-06
Paints and varnishes — Evaluation of
properties of coating systems related
to the spray application process —
Part 3:
Assessment of sagging, formation of
bubbles, pinholing and hiding power
Peintures et vernis — Évaluation des propriétés des systèmes de
revêtement liées au mode d'application par pulvérisation —
Partie 3: Évaluation du festonnage, de la formation de bulles, des
piqûres et du pouvoir masquant
Reference number
ISO 28199-3:2021(E)
ISO 2021
---------------------- Page: 7 ----------------------
SIST EN ISO 28199-3:2021
ISO 28199-3:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 28199-3:2021
ISO 28199-3:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Tendency to sagging .......................................................................................................................................................................................... 2

4.1 General ........................................................................................................................................................................................................... 2

4.2 Evaluation .................................................................................................................................................................................................... 4

5 Bubbles ........................................................................................................................................................................................................................... 4

5.1 General ........................................................................................................................................................................................................... 4

5.2 Evaluation .................................................................................................................................................................................................... 4

6 Pinholing ....................................................................................................................................................................................................................... 4

6.1 General ........................................................................................................................................................................................................... 4

6.2 Evaluation .................................................................................................................................................................................................... 4

7 Hiding power ............................................................................................................................................................................................................ 4

7.1 General ........................................................................................................................................................................................................... 4

7.2 Evaluation .................................................................................................................................................................................................... 5

8 Test report ................................................................................................................................................................................................................... 5

Annex A (informative) Examples of bubbles, pinholes and craters...................................................................................... 6

Bibliography .............................................................................................................................................................................................................................14

© ISO 2021 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 28199-3:2021
ISO 28199-3:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).
Any
...

SLOVENSKI STANDARD
oSIST prEN ISO 28199-3:2020
01-september-2020
Barve in laki - Vrednotenje lastnosti premaznih sistemov pri nanašanju - 3. del:
Vizualno ocenjevanje polzenja, pojava mehurčkov, luknjic in kritnosti (ISO/DIS
28199-3:2020)

Paints and varnishes - Evaluation of properties of coating systems related to the

application process - Part 3: Assessment of sagging, formation of bubbles, pinholing and

hiding power (ISO/DIS 28199-3:2020)
Beschichtungsstoffe - Beurteilung applikationsbedingter Eigenschaften von

Beschichtungssystemen - Teil 3: Visuelle Beurteilung von Ablaufneigung, Kocherbildung,

Nadelstichbildung und Deckvermögen (ISO/DIS 28199-3:2020)

Peintures et vernis - Évaluation des propriétés des systèmes de revêtement liées au

mode d'application - Partie 3: Évaluation visuelle du festonnage, de la formation de

bulles, des piqûres et du pouvoir masquant (ISO/DIS 28199-3:2020)
Ta slovenski standard je istoveten z: prEN ISO 28199-3
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 28199-3:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 28199-3:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 28199-3:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 28199-3
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2020-06-23 2020-09-15
Paints and varnishes — Evaluation of properties of coating
systems related to the application process —
Part 3:
Assessment of sagging, formation of bubbles, pinholing
and hiding power

Peintures et vernis — Évaluation des propriétés des systèmes de revêtement liées au mode d'application —

Partie 3: Évaluation visuelle du festonnage, de la formation de bulles, des piqûres et du pouvoir masquant

ICS: 87.040
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 28199-3:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 28199-3:2020
ISO/DIS 28199-3:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 28199-3:2020
ISO/DIS 28199-3:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Tendency to sagging .......................................................................................................................................................................................... 1

4.1 General ........................................................................................................................................................................................................... 1

4.2 Evaluation .................................................................................................................................................................................................... 3

5 Bubbles ........................................................................................................................................................................................................................... 3

5.1 General ........................................................................................................................................................................................................... 3

5.2 Evaluation .................................................................................................................................................................................................... 3

6 Pinholing ....................................................................................................................................................................................................................... 3

6.1 General ........................................................................................................................................................................................................... 3

6.2 Evaluation .................................................................................................................................................................................................... 3

7 Hiding power ............................................................................................................................................................................................................ 3

7.1 General ........................................................................................................................................................................................................... 3

7.2 Evaluation .................................................................................................................................................................................................... 4

8 Test report ................................................................................................................................................................................................................... 4

Annex A (informative) Examples of bubbles, pinholes and craters...................................................................................... 5

Bibliography .............................................................................................................................................................................................................................13

© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 28199-3:2020
ISO/DIS 28199-3:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/

iso/ foreword .html.

This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee

SC 9, General test methods for paints and varnishes.

This second edition cancels and replaces the first edition (ISO ISO 28199-3:2009), which has been

technically revised.
The main changes compared to the previous edition are as follows:
— assessment using measuring techniques was added for all evalua
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.