SIST EN 62680-2-3:2016

Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14) (IEC 62680-2-3:2015)

This document describes the mechanical, electrical, environmental, design and performance
criteria and voluntary supplier compliance requirements for USB connectors, cable and
fabricated cable assemblies. In addition, this document provides detailed requirements for the
design, approval and implementation of application specific USB connectors and fabricated
cable assemblies.

Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 2-3: Klasse für Kabel und Steckverbinder des Universellen Seriellen Busses, Überarbeitung 2.0 (IEC 62680-2-3:2015)

Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 2-3 : câbles et connecteurs USB, document de classe, révision 2.0 (TA 14) (IEC 62680-2-3:2015)

L'IEC 62680-2-3:2015 décrit les critères mécaniques, électriques, environnementaux, de conception et de performances, ainsi que les exigences de conformité de fournisseurs volontaires pour les connecteurs, les câbles et les ensembles câbles-connecteurs fabriqués USB. En outre, ce document fournit les exigences précises pour la conception, l'approbation et la mise en œuvre des connecteurs et des ensembles câbles-connecteurs fabriqués USB spécifiques à des applications.

Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 2-3. del: Razredi za USB-kable in priključke, revizija 2.0 (TA 14) (IEC 62680-2-3:2015)

Ta dokument opisuje mehanska, električna, okoljska merila, merila načrtovanja in učinkovitosti ter zahteve za skladnost prostovoljnega dobavitelja za priključke USB, kable in izdelane kabelske sestave. Poleg tega ta dokument podaja podrobne zahteve za načrtovanje, potrditev in uvajanje priključkov USB, namenjenih določeni uporabi, in izdelanih kabelskih sestavov.

General Information

• Status: Published
• Publication Date: 10-Feb-2016
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: AVM - Audio, video and multimedia systems and equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 28-Dec-2015
• Due Date: 03-Mar-2016
• Completion Date: 11-Feb-2016
• Ref Project: EN 62680-2-3:2015 - Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (TA 14)

Relations

• Replaces: SIST EN 62680-4:2014 - Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 (IEC 62680-4:2013)
• Effective Date: 18-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62680-2-3:2016
01-marec-2016
9PHVQLNLXQLYHU]DOQHJDVHULMVNHJDYRGLOD]DSUHQRVSRGDWNRYLQQDSDMDQMH
GHO5D]UHGL]D86%NDEOHLQSULNOMXþNHUHYL]LMD7$,(&
Universal Serial Bus interfaces for data and power - Part 2-3: Universal Serial Bus
Cables and Connectors Class Document, Revision 2.0 (TA 14) (IEC 62680-2-3:2015)
6FKQLWWVWHOOHQGHV8QLYHUVHOOHQ6HULHOOHQ%XVVHVIU'DWHQXQG(QHUJLH7HLO.ODVVH
IU.DEHOXQG6WHFNYHUELQGHUGHV8QLYHUVHOOHQ6HULHOOHQ%XVVHVhEHUDUEHLWXQJ
,(&
,QWHUIDFHVGHEXVXQLYHUVHOHQVpULHSRXUOHVGRQQpHVHWO
DOLPHQWDWLRQpOHFWULTXH3DUWLH
FkEOHVHWFRQQHFWHXUV86%GRFXPHQWGHFODVVHUpYLVLRQ7$
,(&
Ta slovenski standard je istoveten z: EN 62680-2-3:2015
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62680-2-3:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62680-2-3:2016

---------------------- Page: 2 ----------------------

SIST EN 62680-2-3:2016


EUROPEAN STANDARD EN 62680-2-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2015
ICS 29.220; 33.120; 35.200

English Version
Universal Serial Bus interfaces for data and power - Part 2-3:
Universal Serial Bus Cables and Connectors Class Document,
Revision 2.0 (TA 14)
(IEC 62680-2-3:2015)
Interfaces de bus universel en série pour les données et Schnittstellen des Universellen Seriellen Busses für Daten
l'alimentation électrique - Partie 2-3 : câbles et connecteurs und Energie - Teil 2-3: Klasse für Kabel und
USB, document de classe, révision 2.0 (TA 14) Steckverbinder des Universellen Seriellen Busses,
(IEC 62680-2-3:2015) Überarbeitung 2.0
(IEC 62680-2-3:2015)
This European Standard was approved by CENELEC on 2015-10-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62680-2-3:2015 E

---------------------- Page: 3 ----------------------

SIST EN 62680-2-3:2016
EN 62680-2-3:2015
European foreword
The text of document 100/2333/CDV, future edition 1 of IEC 62680-2-3, prepared by Technical Area
14 "Interfaces and methods of measurement for personal computing equipment" of IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62680-2-3:2015.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-07-14
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-10-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62680-2-3:2015 was approved by CENELEC as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN 62680-2-3:2016




IEC 62680-2-3

®


Edition 1.0 2015-09




INTERNATIONAL



STANDARD








colour

inside










Universal serial bus interfaces for data and power –

Part 2-3: Universal Serial Bus Cables and Connectors Class Document

Revision 2.0


























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 29.220; 33.120; 35.200 ISBN 978-2-8322-2847-0



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 5 ----------------------

SIST EN 62680-2-3:2016
– 2 – IEC 62680-2-3:2015 © IEC 2015
© USB-IF 2014
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

UNIVERSAL SERIAL BUS INTERFACES
FOR DATA AND POWER –

Part 2-3: Universal Serial Bus Cables and
Connectors Class Document Revision 2.0

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-2-3 has been prepared by technical area 14: Interfaces and
methods of measurement for personal computing equipment, of IEC technical committee 100:
Audio, video and multimedia systems and equipment.
The text of this standard is based on documents prepared by the USB Implementers Forum
(USB-IF). The structure and editorial rules used in this publication reflect the practice of the
organization which submitted it.

---------------------- Page: 6 ----------------------

SIST EN 62680-2-3:2016
IEC 62680-2-3:2015 © IEC 2015 – 3 –
© USB-IF 2014
The text of this standard is based on the following documents:
CDV Report on voting
100/2333/CDV 100/2436/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all the parts in the IEC 62680 series, published under the general title Universal serial
bus interfaces for data and power can be found on the IEC website.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 7 ----------------------

SIST EN 62680-2-3:2016
– 4 – IEC 62680-2-3:2015 © IEC 2015
© USB-IF 2014
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by
the USB Implementers Forum (USB-IF). These specifications were to submitted to the IEC
under the auspices of a special agreement between the IEC and the USB IF.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group
of companies that developed the Universal Serial Bus specification. The USB-IF was formed
to provide a support organization and forum for the advancement and adoption of Universal
Serial Bus technology. The Forum facilitates the development of high-quality compatible USB
peripherals (devices), and promotes the benefits of USB and the quality of products that have
passed compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS, "WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-
INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB
IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY
RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS
SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU
WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to
participate in a reciprocal, royalty-free licensing arrangement for compliant products. For more
information, please see:
http://www.usb.org/developers/docs/
http://www.usb.org/developers/devclass_docs#approved
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO
ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB
IMPLEMENTERS FORUM.”
This series covers the Universal Series Bus interfaces for data and power and consists of the
following parts:
IEC 62680-1-1, Universal Serial Bus interfaces for data and power – Part 1-1: Common
components – USB Battery Charging Specification, Revision 1.2
IEC 62680-2-1, Universal Serial Bus interfaces for data and power – Part 2-1: Universal
Serial Bus Specification, Revision 2.0
IEC 62680-2-2, Universal Serial Bus interfaces for data and power – Part 2-2: USB Micro-
USB Cables and Connectors Specification, Revision 1.01
IEC 62680-2-3, Universal Serial Bus interfaces for data and power – Part 2-3: Universal
Serial Bus Cables and Connectors Class Document Rev. 2.0
This part of the IEC 62680 series consists of several distinct parts:
• the main body of the text, which consists of the original specification developed by the
USB-IF.

---------------------- Page: 8 ----------------------

SIST EN 62680-2-3:2016
IEC 62680-2-3:2015 © IEC 2015 – 5 –
© USB-IF 2014
CONTENTS
FOREWORD . 2
INTRODUCTION . 4
1 Introduction . 11
1.1 Purpose . 11
1.2 Scope . 11
1.3 Related Documents . 11
1.4 Terms and Abbreviations . 12
2 Management Overview . 13
3 USB Electrical, Mechanical and Environmental Compliance Standards . 13
4 Acceptance Criteria, Test Methods and Test Procedures . 17
4.1 Integrators List (IL) . 17
4.2 USB Logo Usage . 17
4.3 Compliance Test Report. 17
4.4 Connector and Cable Assembly Physical Certification . 17
4.5 General Information . 18
4.5.1 Mated Pairs . 18
4.5.2 Before Testing . 18
4.5.3 Test Sequences . 18
4.6 Sample Selection . 18
4.7 USB Compliance Testing Interval . 18
4.8 Primary Qualification Approval Testing. 19
4.9 Sustaining Qualification Approval Testing . 19
4.10 Compliance Test Sequences . 19
4.10.1 Inspection EIA 364-18 . 19
4.10.2 Test Group ‘1’ . 21
4.10.3 Test Group ‘2’ . 22
4.10.4 Test Group ‘3’ . 23
4.10.5 Test Group ‘4’ . 24
4.10.6 Test Group ‘5’ . 25
4.10.7 Test Group ‘6’ . 25
4.10.8 Test Group ‘7’ . 26
4.10.9 Test Group ‘8’ . 27
5 Certification Acceptance and Submission . 27
5.1 Compliance Test Report. 28
5.2 Listing, Authorization and Notification . 28
5.2.1 Listing . 28
5.2.2 Authorization to use Certified USB Logo . 28
5.2.3 Notification . 28
Appendices . 29

Figure 4-1 – Typical Contact Resistance Measurement . 22

Table 3-1 – Electrical, Mechanical and Environmental Compliance Standards . 14
Table 4-1 – Test Conditions . 18
Table 4-2 – Performance Levels . 18

---------------------- Page: 9 ----------------------

SIST EN 62680-2-3:2016
– 6 – IEC 62680-2-3:2015 © IEC 2015
© USB-IF 2014
Table 4-3 – Primary Qualification Approval Testing . 19
Table 4-4 – Test Group '1' Durability, Vibration, Shock, Cable Retention and
Mating/Un-mating Force . 21
Table 4-5 – Group '2' Temperature Life . 22
Table 4-6 – Test Group '3' Mixed Flowing Gas . 23
Table 4-7 – Test Group '4' Insulation Resistance, Dielectric Withstanding Voltage,
Thermal Shock & Humidity Temperature Cycling . 24
Table 4-8 – Test Group '5' Solderability . 25
Table 4-9 – Test Group '6' High Frequency Testing . 25
Table 4-10 – Test Group '7' Critical Dimensions . 26
Table 4-11 – Test Group '8' Cable. 27

---------------------- Page: 10 ----------------------

SIST EN 62680-2-3:2016
IEC 62680-2-3:2015 © IEC 2015 – 7 –
© USB-IF 2014
Universal Serial Bus
Cables and Connectors
Specification


Revision 2.0
August, 2007
Revision History
Revision Date Filename Comment
2.0 RC 6 August 10, CabConnRC6_Aug10.doc Added Go/No-go & latch measurement for Micro
2007 series
Added Drain wire inspection process
Added pin contact visual inspection
Added clarifying text to 4-axis test description
2.0 RC5 June 5, 2007 CabConn20RC5_June5 Removed Shielding Effectiveness Replace
Rotational Continuity with 4-Axis continuity Other
miscellaneous minor changes
2.0 RC4 May, 2007 CabConn20RC4_May07 Cable Construction inspection added
2.0 April 4, 2007 CabConn20 Removed Shielding Effectiveness, Added power
line resistance test Added cable rotation test
2.0 February 14, CabConn Rev 2.0 Edits from Tsuyoshi YAMANE of Matsushita
2007
2.0 February 13, CabConn Rev 2.0 Edited by Jim Koser new chart from Hirose
2007
2.0 February 7, CabConn Rev 2.0 Edited draft
2007
2.02RC2 February 6, CabConnRC2_02-06-07 Work group editorials
2007
2.01RC2 December 6, CabConnRC2_12-06-06 Work group editorials
2006
2.0RC2 July 11, 2006 CabConnRC2_7-11-06 Added durability requirements for Ruggedized
Standard “A” receptacle and durability
requirements for Micro series
2.0RC2 June 7, 2006 CabConnRC2_6-7-06 Added new critical dimensions drawings for
standard “A” and “B” plugs and receptacles and
changed the criteria for “mini” products to the use
of go – no go gages in Appendix B
2.0RC2 March 24, CabConnRC2_3-23- Added new IP agreement
2006 06.doc
2.0RC2 December CabConnRC2.doc Final edit during USB DWG meeting in Austin
03,2003 prior to posting the document to Web site
2.0RC1 October 29, CabConnRC1.doc Adjust formatting in technical edit pass
2002
2.0RC August 13, Rewrite of test program to reflect current practice
2002 and general updates to reflect changes in the
USB Specification.
1.1 September 1, Editorial Update for improved use. Add
1999 Appendices ‘A’ and ‘B.’
1.0 May 22, 1999  Accepted unanimously by USB-IF DWG after 30-
day posting without negative comment.
1.0RC March 27, Release for industry comment
1999

---------------------- Page: 11 ----------------------

SIST EN 62680-2-3:2016
– 8 – IEC 62680-2-3:2015 © IEC 2015
© USB-IF 2014
Revision Date Filename Comment
0.9a January 19, Moved to Revision 0.9 by consensus of the Cable
1999 & Connector Work Group. Pending final editorial
cleanup RRs to be voted on at a special Cable &
Connector Work Group meeting February 21,
1999.
0.9RC December 18, Moves Document to 0.9RC by consensus of the
1998 Cable & Connector Group to Version 0.9 without
Appendices Drawings and Lab Listings. Special
dispensation by the DWG to move to Revision
1.0 for use at the January 1999 Plug Fest.
0.8 October 20, Release for industry comment
1998

INTELLECTUAL PROPERTY DISCLAIMER
THIS SPECIFICATION IS PROVIDED TO YOU “AS IS” WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-
INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE AUTHORS OF
THIS SPECIFICATION DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR
INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR
IMPLEMENTATION OF INFORMATION IN THIS SPECIFICATION. THE PROVISION OF THIS
SPECIFICATION TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR
IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS.
All product names are trademarks, registered trademarks, or service marks of their respective
owners.
USB Cables and Connectors Class Document
© Copyright 2007 USB Implementers Forum
All rights reserved.

---------------------- Page: 12 ----------------------

SIST EN 62680-2-3:2016
IEC 62680-2-3:2015 © IEC 2015 – 9 –
© USB-IF 2014
Contributors
Name Company E-mail Address
James R. Koser Foxconn Electronics – CCWG Chair [e-mail]
Tsuneki Watanabe Foxconn Electronics [e-mail]
Jim Zhao Foxconn Electronics [e-mail]
George G. Olear II Contech Research – Co-Editor [e-mail]
Jaremy Flake ATL Technology – CCWG Scribe [e-mail]
Glen Chandler Acon [e-mail]
George Yee Acon [e-mail]
Roy Ting ELKA International Ltd. [e-mail]
Sophia Liu ETC (Electronic Test Center, Taiwan) [e-mail]
Bill Northey FCI [e-mail]
Jack Lu Foxlink International, Inc. [e-mail]
Wen Yang Foxlink International, Inc. [e-mail]
Yasuhiro Ishii Fujikura Ltd [e-mail]
Shigreu Ashida Fujikura Ltd [e-mail]
Marksuk Piyavit Fujikura Ltd MPiyavit @fujikura.com
Hiromichi Kato Fujikura Ltd [e-mail]
Sathid Inthon Fujikura Ltd isathid @fujikura.com
Makoto Kikuchi Fujikura Ltd [e-mail]
Hiroshi Nakazawa Hirose Electric Co. Ltd Hiroshi [e-mail]
Yousuke Takeuchi Hirose Electric Co. Ltd [e-mail]
Shinya Tono Hirose Electric Co. Ltd [e-mail]
Karl Kwiat Hirose Electric Co. Ltd [e-mail]
Kazunori Ichikawa Hirose Electric Co. Ltd [e-mail]
Toshi Sasaki Honda Connectors [e-mail]
Jim Eilers Hosiden [e-mail]
Tsuyoshi Kitagawa Hosiden [e-mail]
David Suryoutomo Japan Aviation Electronics, Inc [e-mail]
Ron Muir Japan Aviation Electronics, Inc [e-mail]
Kazuhiro Saito Japan Aviation Electronics, Inc [e-mail]
Takahiro Deguchi JST Mfg. Co. Ltd [e-mail]
Yasuhira Miya JST Mfg. Co. Ltd [e-mail]
Yoichi Nakazawa JST Mfg. Co. Ltd [e-mail]
Hironori Handa JST Mfg. Co. Ltd [e-mail]
Vincent Chen Longwell [e-mail]
Ron Ward Matsushita Electronics [e-mail]
Hitoshi Kawamura Mitsumi [e-mail]
Atsushi Nishio Mitsumi [e-mail]
Yasuhiko Shinohara Mitsumi [e-mail]
Scott Sommers Molex [e-mail]
E. Mark Rodda Motorola PCS [e-mail]
Sheldon Singleton National Technical Systems [e-mail]
Sam Liu Newnex [e-mail]
Jan Fahllund Nokia Corporation [e-mail]

---------------------- Page: 13 ----------------------

SIST EN 62680-2-3:2016
– 10 – IEC 62680-2-3:2015 © IEC 2015
© USB-IF 2014
Name Company E-mail Address
Kai Silvennoine Nokia Corporation [e-mail]
Richard Petrie Nokia Corporation [e-mail]
Jussi Takaneva Nokia Corporation [e-mail]
Panu Ylihaavisto Nokia Corporation [e-mail]
Arthur Zarnowitz Palm [e-mail]
Dave Peters Palm [e-mail]
Tetsuji Kawaguchi Panasonic (Matsushita) t [e-mail]
Satoshi Yamamoto Panasonic (Matsushita) [e-mail]
Tsuyoshi Yamane Panasonic (Matsushita) [e-mail]
Naoyuki Ono SMK [e-mail]
Eric Yagi SMK [e-mail]
Scott Shuey Tyco Electronics. [e-mail]
Masaru Ueno Tyco Electronics Ueno.masaru@ tycoelectronics.com
Mark Paxson USB-IF. [e-mail]
Ed Beeman 2010 Tech for USB-IF [e-mail]

---------------------- Page: 14 ----------------------

SIST EN 62680-2-3:2016
IEC 62680-2-3:2015 © IEC 2015 – 11 –
© USB-IF 2014
UNIVERSAL SERIAL BUS INTERFACES
FOR DATA AND POWER –

Part 2-3: Universal Serial Bus Cables and
Connectors Class Document Revision 2.0



1 Introduction
1.1 Purpose
This document describes the mechanical, electrical, environmental, design and performance
criteria and voluntary supplier compliance requirements for USB connectors, cable and
fabricated cable assemblies. In addition, this document provides detailed requirements for the
design, approval and implementation of application specific USB connectors and fabricated
cable assemblies.
1.2 Scope
The information provided in this document serves as a guideline for design, development and
voluntary compliance testing of USB connectors and fabricated cables assemblies, as well as
defining mechanical, electrical, environmental and performance characteristics. As such, it
defines how USB connectors, cable and fabricated cables assemblies are to be implemented
and how manufacturers and/or fabricators will interact with the voluntary compliance
requirements.
1.3 Related Documents
American Society for Testing and Materials
ASTM-D-4565 Standard Test Methods for Physical and Environmental Performance
Properties of Insulations and Jackets for Telecommunications Wire and
Cable. This specification is available through the World Wide Web site
http://www.astm.org/
ASTM-D-4566 Standard Test Methods for Electrical Performance Properties of Insulations
and Jackets for Telecommunications Wire and Cable. This specification is
available through the World Wide Web site http://www.astm.org/
ANSI/EIA 364-C Electrical Connector/Socket Test Procedures Including Environmental
Classifications, approved 1994. Available in hard copy – reference search
site http://www.nssn.org/information.html
Underwriters Laboratories
UL STD-94 Test procedures used to classify polymeric materials 94HB, 94V-1, 94V-2,
94-5VA, 94-5VB, 94VTM-0, 94VTM-1, 94VTM-2, 94HBF, 94HF-1, and
94HF-2. This specification is available through the World Wide Web site
http://www.comm-2000.com/
UL Subject-444 Type CMP (plenum cable), Type CMR (riser cable), Type CM (commercial
cable), and Type CMX (cable for restricted use. This specification is
available through the World Wide Web site http://www.comm-2000.com/
[USB2.0] Universal Serial
...