SIST EN 13399:2010
(Main)Bitumen and bituminous binders - Determination of storage stability of modified bitumen
Bitumen and bituminous binders - Determination of storage stability of modified bitumen
This European Standard specifies a method for measuring the storage stability at high temperatures.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem Bitumen
Dieses Dokument legt ein Verfahren zum Messen der Lagerbeständigkeit bei hohen Temperaturen fest. ANMERKUNG Es ist bekannt, dass modifiziertes Bitumen und besonders mit Polymeren modifiziertes Bitumen, das vorwiegend aus Bitumen und mindestens einem zusätzlichen Bestandteil besteht, unter bestimmten Bedingungen Phasentrennung
zeigt. WARNUNG — Die Anwendung dieser Europäischen Norm kann den Umgang mit gefährlichen Substanzen und Ausrüstungsteilen und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Europäische Norm erhebt nicht den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in der Verantwortung des Anwenders dieser Europäischen Norm, geeignete Verhaltensregeln zur Sicherheit und Gesundheit festzulegen und vor der Anwendung zu klären,
ob einschränkende Vorschriften zu berücksichtigen sind.
Bitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiés
La présente norme européenne prescrit une méthode permettant de mesurer la stabilité au stockage à des
températures élevées.
NOTE Les bitumes modifiés, et plus particulièrement les bitumes modifiés par des polymères, qui contiennent
principalement du bitume et au moins un agent additivé, sont connus pour présenter une séparation de phases dans
certaines conditions.
AVERTISSEMENT — L'utilisation de la présente Norme européenne implique l'intervention de produits,
d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas
censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de
l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer
l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje stabilnosti modificiranih bitumnov pri skladiščenju
Ta evropski standard določa metodo za merjenje stabilnost skladiščenja pri visokih temperaturah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VNODGLãþHQMXBitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem BitumenBitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiésBitumen and bituminous binders - Determination of storage stability of modified bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13399:2010SIST EN 13399:2010en,fr,de01-oktober-2010SIST EN 13399:2010SLOVENSKI
STANDARDSIST EN 13399:20041DGRPHãþD
SIST EN 13399:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13399
May 2010 ICS 75.140; 91.100.50 Supersedes EN 13399:2003English Version
Bitumen and bituminous binders - Determination of storage stability of modified bitumen
Bitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiés
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem Bitumen This European Standard was approved by CEN on 23 April 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13399:2010: ESIST EN 13399:2010
EN 13399:2010 (E) 2 Contents Page Foreword . 31 Scope . 42 Normative references . 43 Principle . 44 Apparatus . 45 Procedure . 46 Test report . 5Bibliography . 6 SIST EN 13399:2010
EN 13399:2010 (E) 3 Foreword This document (EN 13399:2010) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR/BNPé. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2010, and conflicting national standards shall be withdrawn at the latest by November 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13399:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VNODGLãþHQMXBitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem BitumenBitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiésBitumen and bituminous binders - Determination of storage stability of modified bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:FprEN 13399kSIST FprEN 13399:2010en,de01-januar-2010kSIST FprEN 13399:2010SLOVENSKI
STANDARD
kSIST FprEN 13399:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 13399
October 2009 ICS 75.140; 91.100.50 Will supersede EN 13399:2003English Version
Bitumen and bituminous binders - Determination of storage stability of modified bitumen
Bitumes et liants bitumineux - Détermination de la stabilité au stockage des bitumes modifiés
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Lagerbeständigkeit von modifiziertem Bitumen This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 336.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 13399:2009: EkSIST FprEN 13399:2010
FprEN 13399:2009 (E) 2 Contents Page Foreword . 31 Scope . 42 Normative references . 43 Principle . 44 Apparatus . 45 Procedure . 46 Test report . 5Bibliography . 6 kSIST FprEN 13399:2010
FprEN 13399:2009 (E) 3 Foreword This document (FprEN 13399:2009) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 13399:2003. kSIST FprEN 13399:2010
FprEN 13399:2009 (E) 4 1 Scope This document specifies a method for measuring the storage stability at high temperatures. NOTE Modified bitumen and, in particular, polymer-modified bitumen, which consist of mainly bitumen and at least one additional agent, are known to display phase separation under
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.